| [1] Tang M. Airbreathing hypersonic propulsion at Pratt & Whitney-overview, AIAA-2005-3258.Reston: AIAA, 2005.[2] Kumar A, Philip J D, Charles R M, et al. Research in hypersonic airbreathing propulsion at the NASA Langley research center//15th International Symposium on Air Breathing Engines, 2001: 1-16.[3] Rozario D, Zouaoui Z. Computational fluid dynamic analysis of scramjet inlet, AIAA-2007-30.Reston: AIAA, 2007.[4] Yuan H C, Guo R W. Investigation of an experiment project of hypersonic inlet with different forebody widths[J]. Acta Aeronautica et Astronautica Sinica,2012,33(4): 617-624. (in Chinese) 袁化成, 郭荣伟.一种前体加宽型高超声速进气道试验方案研究[J]. 航空学报, 2012, 33(4): 617-624.[5] Martin J. The X-43A hyper-X mach 7 flight 2 guidance, navigation,and control overview and flight test results, AIAA-2005-3275.Reston: AIAA, 2005.[6] Wang J Q, Ni Z Y, Li S X, et al. Numerical simulation of two-dimensional super/hypersonic inlet flowfields[J]. Acta Aeronautica et Astronautica Sinica,2005,26(2): 153-157. (in Chinese) 王军旗, 倪招勇, 李素循, 等.二维超/高超声速进气道流场数值模拟[J]. 航空学报,2005,26(2): 153-157.[7] Chen M. How to determine the scale ratio of wind tunnel test models by CFD-a leap in the design standard of wind tunnel test models from the perception to the reason[J]. Journal of Astronautics,2007,28 (3): 594-597.(in Chinese) 陈谟.如何使用CFD来确定风洞实验模型的缩尺比例——风洞试验模型设计准则从感性到理性的飞跃[J].宇航学报, 2007, 28(3): 594-597.[8] Chen M. On the relationship of the similarity criterion, wind tunnel scales and date accuracy[J]. Journal of Astronautics,1997,18 (1): 40-46.(in Chinese) 陈谟.论相似准则、风洞尺寸与数据精、准度与关系[J]. 宇航学报,1997,18 (1): 40-46.[9] Ingenito A, Gulli S, Bruno C. Sizing of TBCC hypersonic airbreathing vehicles, AIAA-2009-5186.Reston: AIAA, 2009.[10] Jin L, Liu J, Luo S B, et al. Numerical study on the influence of model scale and inflow conditions in wind tunnel experiment[J]. Acta Aerodynamica Sinica, 2010,28(3):341-345.(in Chinese) 金亮, 柳军, 罗世彬, 等.数值模拟模型尺寸与来流条件 对实验数据的影响[J].空气动力学学报, 2010, 28(3): 341-345.[11] Yuan H C, Guo R W. Design and experimental verification of hypersonic inlet with rectangular section[J]. Journal of Nanjing University of Aeronautics & Astronautics, 2009, 41(4): 423-428. (in Chinese) 袁化成, 郭荣伟.矩形截面高超声速进气道气动设计及实验验证[J].南京航空航天大学学报, 2009, 41(4): 423-428.[12] Christian T W, Thomas H, Evans S W, et al. The effect of boundary layer trips on intake separation in Crosswinds,AIAA-2008-4077.Reston: AIAA, 2008.[13] Motycka D L. Reynolds number and fan/inlet coupling effects on subsonic transport inlet distortion[J].Journal of Propulsion and Power, 1985(3): 229-234.[14] Chen M Z. Fundamentals of viscous fluid dynamics[M]. Beijing: Higher Education Press, 1984: 31-33. (in Chinese) 陈懋章.粘性流体动力学基础[M].北京: 高等教育出版社, 1984: 31-33.[15] Seddon J. Boundary-layer interaction effects in intakes with particular reference to those designed for dual subsonic and supersonic performance, No.3565.London: Her Majesty's Stationery office, 1970. |
CJA
