航空学报 > 2025, Vol. 46 Issue (9): 130888-130888   doi: 10.7527/S1000-6893.2024.30888

防热结构梯度特性对飞行器气动热载调控的耦合模拟与实验验证

杨肖峰, 蔡兴考, 刘磊(), 魏东, 肖光明, 杜雁霞, 桂业伟   

  1. 空天飞行空气动力科学与技术全国重点实验室,绵阳 621000
  • 收稿日期:2024-07-01 修回日期:2024-07-25 接受日期:2024-08-19 出版日期:2024-08-22 发布日期:2024-08-21
  • 通讯作者: 刘磊 E-mail:liulei_9110176@163.com
  • 基金资助:
    国家重点研发计划(2019YFA0405202);国家自然科学基金(12072361)

Coupling simulation of aircraft aerothermodynamics regulated by gradient characteristics of thermal protection structure and its experimental verification

Xiaofeng YANG, Xingkao CAI, Lei LIU(), Dong WEI, Guangming XIAO, Yanxia DU, Yewei GUI   

  1. State Key Laboratory of Aerodynamics,Mianyang 621000,China
  • Received:2024-07-01 Revised:2024-07-25 Accepted:2024-08-19 Online:2024-08-22 Published:2024-08-21
  • Contact: Lei LIU E-mail:liulei_9110176@163.com
  • Supported by:
    National Key Research and Development Plan(2019YFA0405202);National Natural Science Foundation of China(12072361)

摘要:

先进的热防护系统是高速飞行器实现安全飞行的重要系统。随着热防护用复合材料体系的发展,防隔热一体化的功能梯度型复合材料逐步得到应用,实现防热、隔热性能的按需定制与协同设计。针对防隔热一体化复合材料结构件,发展了高马赫数气动热环境/功能梯度结构热响应紧耦合计算方法,开展了典型状态下内嵌功能梯度材料的复合防热结构的高速可压缩流动/传热耦合模拟,并对内嵌分层温度传感器的功能梯度材料试件进行了石英灯红外加热实验,获得了复合防热结构耦合传热特性的影响规律,分析了结构梯度特性对飞行器气动热载的调控机制。研究发现,在高马赫气流条件下,防隔热梯度材料能够较好地调控热量在防热结构内部的输运过程,既可以防止表面瞬时超耐温极限而导致热损伤,又可实现结构内部温度均匀变化从而避免热失配,达到防隔一体、内外兼顾的综合效果。

关键词: 高马赫数, 功能梯度材料, 防隔热一体化, 计算流体力学, 热防护

Abstract:

Advanced thermal protection system is an important part for safe flight of high-speed aircraft. With the development of composite material system for thermal protection, functional gradient composite materials with integrated thermal protection/insulation have been gradually applied to realize on-demand customization and collaborative design of thermal protection and thermal insulation properties. A tight coupling computation method for high Mach number aerothermal environment and thermal response of functionally gradient structure was developed for integrated thermal insulation composite structures. High-speed compressible flow/heat transfer coupling simulation of composite thermal structures with functionally gradient materials embedded was carried out under typical conditions. The infrared heating experiment of quartz lamp was carried out by testing functional gradient material with embedded layered temperature sensors. The influence of coupled heat transfer characteristics of composite thermal structures was obtained. The regulation mechanism of structural gradient characteristics on aerodynamic thermal load of aircraft was analyzed. It was found that under the condition of high Mach number air flow, the thermal insulation gradient material can better regulate the heat transport process inside the thermal insulation structure, which can not only prevent the instantaneous surface from exceeding the temperature limit to cause thermal damage, but also achieve uniform changes in the internal temperature of the structure to avoid thermal mismatch.

Key words: high Mach number, functionally graded material, thermal protection/insulation integration, computational fluid dynamics, thermal protection

中图分类号: