[1] YOO J H, HONG J I, CAO W. Piezoelectric ceramic bimorph coupled to thin metal plate as cooling fan for electronic devices[J]. Sensors Actuators A, 2000, 79(1):8-12.[2] CHUNG H C, KUMMARI K L, CROUCHER S J, et al. Development of piezoelectric fans for flapping wing application[J]. Sensors and Actuators A:Physical, 2009, 149(1):136-142.[3] GILSON G M, PICKERING S J, HANN D B, et al. Piezoelectric fan cooling:A novel high reliability electric machine thermal management solution[J]. IEEE Transactions on Industrial Electronics, 2013, 60(11):4841-4851.[4] KIM Y H, WERELEY S T, CHUN C H. Phase-resolved flow field produced by a vibrating cantilever plate between two endplates[J]. Physics in Fluids, 2004, 16(1):145-162.[5] KIM Y H, CHUN C H, WERELEY S. Flow field around a vibrating cantilever:Coherent structure education by continuous wavelet transform and proper orthogonal decomposition[J]. Journal of Fluid Mechanics, 2011, 669:584-606.[6] KIMBER M, SUZUKI K, KITSUNAI N, et al. Pressure and flow rate performance of piezoelectric fans[J]. IEEE Transactions on Components and Packaging Technologies, 2009, 32(4):766-775.[7] 谭蕾, 谭晓茗, 张靖周. 压电风扇激励非定常流动和换热特性数值研究[J]. 航空学报, 2013, 34(6):1277-1284. TAN L, TAN X M, ZHANG J Z. Numerical investigation on unsteady flow and heat transfer characteristics of piezoelectric fan[J]. Acta Aeronautica et Astronautica Sinica, 2013, 34(6):1277-1284(in chinese).[8] TAN L, ZHANG J Z, TAN X M. Numerical investigation of convective heat transfer on a vertical surface due to resonating cantilever beam[J]. International Journal of Thermal Sciences, 2014, 80:93-107.[9] 孔岳, 李敏, 吴蒙蒙. 压电风扇非定常流场速度分布的数值研究[J]. 工程力学, 2016, 33(1):209-216. KONG Y, LI M, WU M M. Numerical investigation on the velocity of unsteady flow field induced by piezoelectric fan[J]. Engineering Mechanics, 2016, 33(1):209-216(in Chinese).[10] ACIKALIN T, WAIT S M, GARIMELLA S V, et al. Experimental investigation of the thermal performance of piezoelectric fans[J]. Heat Transfer Engineering, 2004, 25(1):4-14.[11] ACIKALIN T, GARIMELLA S V, RAMAN A, et al. Characterization and optimization of the thermal performance of miniature piezoelectric fans[J]. International Journal of Heat and Fluid Flow, 2007, 28(4):806-820.[12] ACIKALIN T, GARIMELLA S V. Analysis and prediction of the thermal performance of piezoelectrically actuated fans[J]. Heat Transfer Engineer, 2009, 30(6):487-498.[13] KIMBER M, GARIMELLA S V, RAMAN A. Local heat transfer coefficients induced by piezoelectrically actuated vibrating cantilevers[J]. ASME Journal of Heat Transfer, 2007, 129(9):1168-1176.[14] KIMBER M, GARIMELLA S V. Measurement and prediction of the cooling characteristics of a generalized vibrating piezoelectric fan[J]. International Journal of Heat and Mass Transfer, 2009, 52(19-20):4470-4478.[15] LIU S F, HUANG R T, SHEU W J, et al. Heat transfer by a piezoelectric fan on a flat surface subject to the influence of horizontal/vertical arrangement[J]. International Journal of Heat and Mass Transfer, 2009, 52(11-12):2565-2570.[16] LIN C N. Analysis of three-dimensional heat and flow induced by piezoelectric fan[J]. International Journal of Heat and Mass Transfer, 2012, 55(11-12):3043-3053.[17] LIN C N. Enhanced heat transfer performance of cylindrical surface by piezoelectric fan under forced convection conditions[J]. International Journal of Heat and Mass Transfer, 2013, 60:296-308.[18] JENG T M, LIU C H. Moving-orientation and position effects of the piezoelectric fan on thermal characteristics of the heat sink partially filled in a channel with axial flow[J]. International Journal of Heat and Mass Transfer, 2015, 85:950-964.[19] 李鑫郡, 张靖周, 谭晓茗. 单个压电风扇传热特性研究[J]. 航空学报, 2017, 38(7):120982. LI X J, ZHANG J Z, TAN X M. Characteristics of heat transfer with a single piezoelectric fan[J]. Acta Aeronautica et Astronautica Sinica, 2017, 38(7):120982(in Chinese).[20] JEONG J, HUSSAIN F. On the definition of a vortex[J]. Journal of Fluid Mechanics, 1995, 285:69-94. |