[1] GREEN S D.A study of U.S.inflight icing accidents,1978 to 2002:AIAA-2006-0082[R].Reston:AIAA,2006.
[2] SMALLEY C L.Certification of Part 23 airplanes for flight in icing conditions:AC 23.1419-2D[R].Washington,D.C.:FAA,2007.
[3] CABLER S J M.Aircraft ice protection:AC 20-73A[R].Washington,D.C.:FAA,2006.
[4] MCGRATH J K.Radio technical commission for aeronautic,Inc.Document RTCA/DO-178B:AC 20-115B[R].Washington,D.C.:FAA,1993.
[5] BEARD M C.Hazards following ground deicing and groundoperations in conditions conducive to aircraft icing:AC 20-117[R].Washington,D.C.:FAA,1982.
[6] HEMPE D W.Turbojet,turboprop,and turbofan engine induction system icing and ice ingestion:AC 20-147[R].Washington,D.C.:FAA,2004.
[7] CABLER S J M.RTCA Document DO-160E,environmental conditions and test procedures for airborne equipment:AC 21-16E[R].Washington,D.C.:FAA,2005.
[8] JACKSON J E.Powerplant guide for certification of Part 23 airplanes and airships:AC 23-16A[R].Washington,D.C.:FAA,2004.
[9] SHOWERS D R.Systems and equipment guide for certification of Part 23 airplanes:AC 23-17B[R].Washington,D.C.:FAA,2004.
[10] BAKER D D.Means of compliance with title 14 CFR,Part 23,§ 23.629,flutter:AC 23.629-1B[R].Washington,D.C.:FAA,2004.
[11] JACKSON J E.Equipment,systems,and installations in Part 23 airplanes:AC 23.1309-1C[R].Washington,D.C.:FAA,1999.
[12] BALLOUGH J J.Pilot guide flight in icing conditions:AC 91-74[R].Washington,D.C.:FAA,2002.
[13] HARRINGTON D R.Pilot guide large aircraft ground deicing:AC 120-58[R].Washington,D.C.:FAA,1992.
[14] DALBEY C B.Ground deicing and anti-icing program:AC 120-60B[R].Washington,D.C.:FAA,2004.
[15] WHITE W J.Ground deicing & anti-icing training & checking:AC 135-16[R].Washington,D.C.:FAA,1994.
[16] WHITE W J.Pilot guide small aircraft ground deicing(pocket):AC 135-17[R].Washington,D.C.:FAA,1994.
[17] MALONE D K.Flight test guide for certification of Part 23 airplanes:AC 23-8B[R].Washington,D.C.:FAA,2003.
[18] POTAPCZUK M G.LEWICE/E:An Euler based ice accretion code:NASA TM-105389[R].Washington,D.C.:NASA,1992.
[19] RUFF G A,BERKOWITZ B M.Users manual for the NASA Lewis ice accretion prediction code(LEWICE):NASA CR-185129[R].Washington,D.C.:NASA,1990.
[20] BRANDI M V,ESPOSITO B.Ice accretion prediction on multi-element airfoils:AIAA-1997-0177[R].Reston:AIAA,1997.
[21] FORTIN G,ILINCA A,LAFORTE J L,et al.Prediction of 2D airfoil ice accretion by bisection method and by rivulets and beads modeling:AIAA-2003-1076[R].Reston:AIAA,2003.
[22] FORTIN G,LAFORTE J L,BEISSWENGER A.Prediction of ice shapes on NACA0012 airfoil:AIAA-2003-01-2154[R].Reston:AIAA,2003.
[23] BOURGAULT Y,HABASHI W G,BEAUGENDRE H.Development of a shallow water icing model in Fensap-Ice:AIAA-1999-0246[R].Reston:AIAA,1999.
[24] CROCE G,BEAUGENDRE H,HABASHI W G.CHT3D:FENSAP-ICE conjugate heat transfer computations with droplet impingement and runback effects:AIAA-2002-0386[R].Reston:AIAA,2002.
[25] BEAUGENDRE H,MORENCY F,HABASHI W G.FENSAP-ICE:Roughness effects on ice shape prediction:AIAA-2003-1222[R].Reston:AIAA,2003.
[26] MYERS T G.Extension to the Messinger model for aircraft icing[J].AIAA Journal,2001,39(2):211-218.
[27] HEINRICH A,ROSS R,ZUMWALT G,et al.Aircraft icing handbook:FAA Technical Report DOT/FAA/CT-88/8-1[R].Washington,D.C.:FAA,1991.
[28] BARTLETT C S.An analytical study of icing similitude for aircraft engine testing:DOT/FAA/CT-86/35 and AEDC-TR-86-26[R].Washington,D.C.:FAA,1986.
[29] BARTLETT C S.Icing scaling considerations for aircraft engine testing:AIAA-1988-0202[R].Reston:AIAA,1988.
[30] BARTLETT C S.An empirical look at tolerances in setting icing test conditions with particular application to icing similitude:DOT/FAA/CT-87/31 and AEDC-TR-87-23[R].Washington,D.C.:FAA,1988.
[31] OLESKIM M M,GREGORIO F D,ESPOSITO B,et al.The effect of altitude on icing tunnel airfoil icing simulation:DOT/FAA/AR-96/81,Ⅱ[R].Washington,D.C.:FAA,1996.
[32] ANDERSON D N.Manual of scaling methods:NASA/CR-2004-212875[R].Washington,D.C.:NASA,2004.
[33] SAEED F,SELIG M S,BRAGG M B.A hybrid airfoil design method to simulate full-scale ice accretion throughout a given C(l)-range:AIAA-1997-0054[R].Reston:AIAA,1997.
[34] BROEREN A P,BRAGG M B.Effect of residual and intercycle ice accretions on airfoil performance:DOT/FAA/AR-02/68[R].Washington,D.C.:FAA,2002.
[35] PELLICANO P.Residual and inter-cycle ice for lower-speed aircraft with pneumatic boots:AIAA-2007-1090[R].Reston:AIAA,2007.
[36] PELLICANO P.Supercooled large drop(SLD) icing and certification of Part 23 airplanes[C]//FAA 2009 Small Airplane Directorate Program Managers Meeting,2009.
[37] JONES A R,LEWIS W.Recommended values of meteorological factors to be considered in the design of aircraft ice-prevention equipment:NACA-TN-1855[R].Washington,D.C.:NACA,1949.
[38] HACKER P T,DORSCH R G.A summary of meteorological conditions associated with aircraft icing and a proposed method of selecting design criterions for ice-protection equipment:NACA-TN-2569[R].Washington,D.C.:NACA,1951.
[39] LEWIS W,BERGRUN N R.A probability analysis of the meteorological factors conductive to aircraft icing in the United States:NACA-TN-2738[R].Washington,D.C.:NACA,1952.
[40] BOWDEN D T,GENSEMER A E,SKEEN C A.Engineering summary of airframe icing technical data:FAA Technical Report ADS-4[R].Washington,D.C.:FAA,1964.
[41] GRAY V H.Correlations among ice measurements,impingement rates,icing conditions,and drag coefficients for unswept NACA 65A004 airfoil:NACA-TN-4151[R].Washington,D.C.:NACA,1958.
[42] 张杰,周磊,张洪,等.飞机结冰探测技术[J].仪器仪表学报,2006,27(12):1578-1586.ZHANG J,ZHOU L,ZHANG H,et al.Aircraft icing detection technology[J].Chinese Journal of Scientific Instrument,2006,27(12):1578-1586(in Chinese).
[43] LEE S,BRAGG M B.Effects of simulated-spanwise-ice shapes on airfoils:Experimental investigation:AIAA-1999-0092[R].Reston:AIAA,1999.
[44] LEE S,KIM H S,BRAGG M B.Investigation of factors that influence iced-airfoil aerodynamics:AIAA-2000-0099[R].Reston:AIAA,2000. |