[1] |
孔祥浩, 张卓然, 陆嘉伟, 等. 分布式电推进飞机电力系统研究综述[J]. 航空学报, 2018, 39(1):021651. KONG X H, ZHANG Z R, LU J W, et al. Review of electric power system of distributed electric propulsion aircraft[J]. Acta Aeronautica et Astronautica Sinica, 2018, 39(1):021651 (in Chinese).
|
[2] |
李永锋. 宽体客机飞控电作动系统设计[J]. 航空学报, 2017, 38(S1):721531. LI Y F. Electrically powered actuation system design for long range wide body commercial aircraft[J]. Acta Aeronautica et Astronautica Sinica, 2017, 38(S1):721531 (in Chinese).
|
[3] |
王莉, 戴泽华, 杨善水, 等. 电气化飞机电力系统智能化设计研究综述[J]. 航空学报, 2019, 40(2):522405. WANG L, DAI Z H, YANG S S, et al. Review of intelligent design of electrified aircraft power systems[J]. Acta Aeronautica et Astronautica Sinica, 2019, 40(2):522405 (in Chinese).
|
[4] |
MARE J C, FU J. Review on signal-by-wire and power-by-wire actuation for more electric aircraft[J]. Chinese Journal of Aeronautics, 2017, 30(3):857-870.
|
[5] |
BANNON D G, SEIDEL W E. Ram Air Turbine speed sensing ball detent over-speed prevention mechanism:US, 11148040[P]. 2005-06-08.
|
[6] |
SWEARINGEN P, MARKS S J. Automatic ram air turbine deployment:US, 13052797[P]. 2011-03-21.
|
[7] |
BAUER R P, STEVENS C G. Load shedding circuit for Ram Air Turbine:US, 13232199[P]. 2011-09-14.
|
[8] |
王岩, 殷亚峰, 陈金华, 等. 冲压空气涡轮泵的温控节流孔计算方法[J]. 北京航空航天大学学报, 2017, 43(7):1287-1292. WANG Y, YIN Y F, CHEN J H, et al. A calculation method for temperature control orifice of ram air turbine pump[J]. Journal of Beijing University of Aeronautics and Astronautics, 2017, 43(7):1287-1292 (in Chinese).
|
[9] |
李兴利, 侯瑞, 周晓春. 冲压空气涡轮舱门开缝问题研究[J]. 航空科学技术, 2015, 26(12):16-19. LI X L, HOU R, ZHOU X C. Research on clearance of RAT cabin door[J]. Aeronautical Science and Technology, 2015, 26(12):16-19 (in Chinese).
|
[10] |
王永鑫, 崔宇. 冲压空气涡轮在民用涡桨飞机中的应用[J]. 航空制造技术, 2014(14):86-88. WANG Y X, CUI Y. Application of ram air turbine in civil turbo-prop aircraft[J]. Journal of Aeronautical Manufacturing Technology, 2014(14):86-88 (in Chinese).
|
[11] |
WANG J. Research on several similarity criteria of ram air turbine operating under high-low altitude[C]//2016 IEEE/CSAA International Conference on Aircraft Utility Systems, 2016:88-92.
|
[12] |
张冬雨, 杨斐, 翟笑天, 等. 冲压空气涡轮气动性能快速算法研究[J]. 江苏航空, 2016(1):4-6. ZHANG D Y, YANG F, ZHAI X T, et al. Research on aerodynamic performance of ram air turbine[J]. Jiangsu Aeronautics, 2016(1):4-6 (in Chinese).
|
[13] |
刘思永, 方祥军, 王屏. 可调桨距冲压空气涡轮气动特性实验与数值分析[J]. 航空动力学报, 2003(5):587-592. LIU S Y, FANG X J, WANG P. The aerodynamic characteristic experiment and numerical analysis of ram air turbine with auto coarse pitch[J]. Journal of Aerospace Power, 2003(5):587-592 (in Chinese).
|
[14] |
吴佳. 某冲压空气涡轮结构设计及强度寿命振动分析[D]. 南京:南京航空航天大学, 2008. WU J. Research on structure design and strength fatigue life vibration Analysis of a typical ram air turbine[D]. Nanjing:Nanjing University of Aeronautics and Astronautics, 2008 (in Chinese).
|
[15] |
马树微, 李静琳, 陈曦,等. 多级固体运载火箭分级多学科设计优化[J]. 北京航空航天大学学报, 2016, 42(3):542-550. MA S W, LI J L, CHEN X, et al. Stage-wise multidisciplinary design optimization for multi-stage solid launch vehicle[J]. Aeronautical Science and Technology, 2016, 42(3):542-550 (in Chinese).
|
[16] |
柏艳红, 陈聪, 孙志毅,等. 基于AMESim的电液阀控缸系统线性化分析[J].系统仿真学报, 2014, 26(7):1430-1434. BAI Y H, CHEN C, SUN ZH Y et al. Linear analysis of electro-hydraulic valve-controlled cylinder system based on AMESim[J]. Journal of System Simulation, 2014, 26(7):1430-1434 (in Chinese).
|
[17] |
黄大伟, 陈新元, 张俊峰,等. 泵车臂架随动控制研究及其联合仿真[J]. 系统仿真学报, 2014, 26,32(11):2791-2796. HUANG D W, CHEN X Y, ZHANG J F, et al. Research and co-simulation on follow-up control for concrete pump truck[J]. Journal of System Simulation, 2014, 26,32(11):2791-2796 (in Chinese).
|
[18] |
陈永琴, 汪天兴, 苏三买,等. 反推力装置液压作动系统AMESim建模与仿真[J]. 航空动力学报, 2017(11):238-246. CHEN Y Q, WANG T X, SU S M, et al. Modeling and simulation of thrust reverser hydraulic actuation system based on AMESim[J]. Journal of Aerospace Power, 2017(11):238-246 (in Chinese).
|
[19] |
周兰午. 风力机离心调速系统特性分析[J]. 河北机电学院学报, 1990, 2(1):1-7. ZHOU L W. Analysis of the stability of a centrifugal regulator for wind mills[J]. Journal of Hebei Mechanical Engineering College, 1990, 2(1):1-7 (in Chinese).
|
[20] |
江桂云,王勇勤,严兴春,等. 基于小孔节流的静压油膜轴承动态特性分析[J]. 机械设计, 2014, 31(7):64-69. JIANG G Y, WANG Y Q, YAN X C, et al. Dynamic characteristics analysis on hydrostatic oil film bearing with orifice restrictor[J]. Journal of Machine Design, 2014, 31(7):64-69 (in Chinese).
|