航空发动机不确定性设计体系探讨

doi:10.7527/S1000-6893.2022.27099

Abstract

Abstract:

A significant number of random and epistemic uncertainties exist in the whole life cycle of an aeroengine， causing problems such as a long design iteration cycle， low manufacturing qualification rate， and difficulties in maintenance. Recent years have witnessed a series of research on uncertainty analysis at home and abroad； however， the uncertainty design system of aeroengines has not been proposed systematically at the theoretical level. Based on the current deterministic design system and the results of uncertainty research， this paper discusses the construction of the uncertainty-based design system and realization of the design system reform for aeroengines. The uncertainty factors and their influence on aeroengines are first summarized， followed by discussion of the definition and necessity of the uncertainty-based design system. The ultimate goal of the uncertainty-based design system is to achieve successful research and development with a single iteration. The performance distribution is quantitatively evaluated and controlled at each design stage to produce a comprehensive optimal design scheme in terms of performance， reliability， robustness， and costs in the whole life cycle. Based on this definition， the basic elements of the uncertainty-based design system are analyzed， including the process， method， platform， specification， and organization. Finally， the periodic prospects， expected benefits， and challenges of the uncertainty-based design system are presented.

Key words: aeroengine, uncertainty analysis, robust design, reliability-based design, design system

CLC Number:

V235.1

Xinqian ZHENG, Junying WANG, Weina HUANG, Yu FU, Ronghui CHENG, Hongyang XIONG. Uncertainty⁃based design system for aeroengines[J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2023, 44(7): 27099-027099.

Figures/Tables 13

Fig. 1

Fig. 2

Fig. 3

Fig. 4

Fig. 5

Fig. 6

Fig. 7

Fig. 8

Fig. 9

Fig. 10

Fig. 11

Fig. 12

Fig. 13

References 69

1	BALLAL D R， ZELINA J. Progress in aeroengine technology （1939-2003）［J］. Journal of Aircraft， 2004， 41（1）： 43-50.
2	WANG J Y， ZHENG X Q. Review of geometric uncertainty quantification in gas turbines［J］. Journal of Engineering for Gas Turbines and Power， 2020， 142（7）： 070801.
3	ZANG T A， HEMSCH M J， HILBURGER M W， et al. Needs and opportunities for uncertainty-based multidisciplinary design methods for aerospace vehicle： NASA TM 2002-211462［R］. Hampton： NASA Langley Research Center， 2002.
4	ALONSO J J， ELDRED M S， CONSTANTINE P， et al. Scalable environment for quantification of uncertainty and optimization in industrial applications （SEQUOIA）［C］∥ 19th AIAA Non-Deterministic Approaches Conference. Reston： AIAA， 2017.
5	HIRSCH C， WUNSCH D， SZUMBARSKI J， et al. Uncertainty management for robust industrial design in aeronautics［M］. Cham： Springer， 2019：1-50.
6	KARL A， MAY G， BARCOCK C， et al. Robust design： methods and application to real world examples［C］∥ Proceedings of ASME Turbo Expo 2006： Power for Land， Sea， and Air. New York： ASME， 2008： 145-151.
7	BUNKER R S. The effects of manufacturing tolerances on gas turbine cooling［J］. Journal of Turbomachinery， 2009， 131（4）： 041018.
8	ZHANG J Y， TANG H L， CHEN M. Linear substitute model-based uncertainty analysis of complicated non-linear energy system performance （case study of an adaptive cycle engine）［J］. Applied Energy， 2019， 249： 87-108.
9	ZHANG J Y， TANG H L， CHEN M. Robust design methodologies to the adaptive cycle engine system performance： Preliminary analysis［J］. Energy Procedia， 2019， 158： 1521-1529.
10	WANG J Y， HE X， WANG B T， et al. Shapley additive explanations of multigeometrical variable coupling effect in transonic compressor［J］. Journal of Engineering for Gas Turbines and Power， 2022， 144（4）： 041015.
11	LUO J Q， XIA Z H， LIU F. Robust design optimization considering inlet flow angle variations of a turbine cascade［J］. Aerospace Science and Technology， 2021， 116： 106893.
12	TAN Y Q， ZANG C P， PETROV E P. Mistuning sensitivity and optimization for bladed disks using high-fidelity models［J］. Mechanical Systems and Signal Processing， 2019， 124： 502-523.
13	许本胜，臧朝平，缪辉，等. 结构动力鲁棒优化设计方法综述［J］. 工程力学， 2019， 36（4）： 24-36.
	XU B S， ZANG C P， MIAO H， et al. Robust optimization design methods of structural dynamics： a review［J］. Engineering Mechanics， 2019， 36（4）： 24-36 （in Chinese）.
14	KLIR G J， FOLGER T A. Fuzzy sets， uncertainty and information［M］. Upper Saddle River： Prentice Hall， 1987： 1-50.
15	KNIGHT F H. Risk， uncertainty and profit［M］. Boston： Houghton Mifflin Company， 1921：1-50.
16	LI D Y， DU Y. Artificial intelligence with uncertainty［M］. 2nd ed. Boca Raton： CRC Press， 2017：1-50.
17	WALTERS R W， HUYSE L. Uncertainty analysis for fluid mechanics with applications： NASA/CR-2002-211449 ［R］. Hampton： NASA Langley Research Center， 2002.
18	ABERNETHY R B， BENEDICT R P， DOWDELL R B. ASME measurement uncertainty［J］. Journal of Fluids Engineering， 1985， 107（2）： 161-164.
19	YAO W， CHEN X Q， LUO W C， et al. Review of uncertainty-based multidisciplinary design optimization methods for aerospace vehicles［J］. Progress in Aerospace Sciences， 2011， 47（6）： 450-479.
20	陈小前，姚雯，欧阳琦. 飞行器不确定性多学科设计优化理论与应用［M］. 北京：科学出版社， 2013： 39-157.
	CHEN X Q， YAO W， OUYANG Q. Theory and application of uncertainty-based multidisciplinary design optimization for flight vehicles［M］. Beijing： Science Press， 2013： 39-157 （in Chinese）.
21	AIAA. Guide for the verification and validation of computational fluid dynamics simulations： AIAA G-077-1998 （R2002）［S］. Reston： AIAA， 1998.
22	MONTOMOLI F， CARNEVALE M， D'AMMARO A， et al. Uncertainty quantification in computational fluid dynamics and aircraft engines［M］. Cham： Springer， 2019：1-66.
23	MEHER-HOMJI C B， CHAKER M A， MOTIWALA H M. Gas turbine performance deterioration［C］//Proceedings of the 30th Turbomachinery Symposium. College Station： Turbomachinery Laboratories， Texas A&M University， 2001.
24	SALLEE G. Performance deterioration based on existing （historical） data： NASA-CR-135448［R］. Cleveland： NASA Lewis Research Center， 1978.
25	SCHNELL R， LENGYEL-KAMPMANN T， NICKE E. On the impact of geometric variability on fan aerodynamic performance， unsteady blade row interaction， and its mechanical characteristics［J］. Journal of Turbomachinery， 2014， 136（9）： 091005.
26	ZHENG X Q， YANG H L. Influence of tip clearance on the performance and matching of multistage axial compressors： GT2016-56232［R］. New York： ASME， 2016.
27	DENTON J D. Loss mechanisms in turbomachines［J］. Journal of Turbomachinery， 1993， 115（4）： 621-656.
28	VO H D. Role of tip clearance flow on axial compressor stability［D］. Cambridge： Massachusetts Institute of Technology， 2001.
29	GHENAIET A， TAN S C， ELDER R L. Prediction of an axial turbomachine performance degradation due to sand ingestion［J］. Proceedings of the Institution of Mechanical Engineers， Part A： Journal of Power and Energy， 2005， 219（4）： 273-287.
30	HERGT A， KLINNER J， STEINERT W， et al. The effect of an eroded leading edge on the aerodynamic performance of a transonic fan blade cascade［J］. Journal of Turbomachinery， 2015， 137（2）： 021006.
31	ZAMBONI G， XU L P. Fan root aerodynamics for large bypass gas turbine engines： Influence on the engine performance and 3D design［J］. Journal of Turbomachinery， 2012， 134（6）： 061017.
32	李其汉，王延荣. 航空发动机结构强度设计问题［M］. 上海：上海交通大学出版社， 2014： 401-430.
	LI Q H， WANG Y R. The design problem of aero-engine structure strength［M］. Shanghai： Shanghai Jiao Tong University Press， 2014： 401-430 （in Chinese）.
33	BONS J P. A review of surface roughness effects in gas turbines［J］. Journal of Turbomachinery， 2010， 132（2）： 021004.
34	DEBRUGE L L. The aerodynamic significance of fillet geometry in turbocompressor blade rows［J］. Journal of Engineering for Power， 1980， 102（4）： 984-993.
35	MARSON E. Effect of manufacturing deviations on performance of axial flow compressor blading： 92-GT-326［R］. New Yrok： ASME， 1992.
36	ROBERTS W B. Axial compressor performance restoration by blade profile control： 84-GT-232 ［R］. New York： ASME， 1984.
37	HAMED A， TABAKOFF W C， WENGLARZ R V. Erosion and deposition in turbomachinery［J］. Journal of Propulsion and Power， 2006， 22（2）： 350-360.
38	CASARI N， PINELLI M， SUMAN A， et al. EBFOG： Deposition， erosion， and detachment on high-pressure turbine vanes［J］. Journal of Turbomachinery， 2018， 140（6）： 061001.
39	MONTOMOLI F， MASSINI M， SALVADORI S. Geometrical uncertainty in turbomachinery： Tip gap and fillet radius［J］. Computers & Fluids， 2011， 46（1）： 362-368.
40	BOYNTON J L， TABIBZADEH R， HUDSON S T. Investigation of rotor blade roughness effects on turbine performance［J］. Journal of Turbomachinery， 1993， 115（3）： 614-620.
41	JOVANOVIĆ M B， DE LANGE H C， VAN STEENHOVEN A A. Effect of hole imperfection on adiabatic film cooling effectiveness［J］. International Journal of Heat and Fluid Flow， 2008， 29（2）： 377-386.
42	SCHROEDER R P， THOLE K A. Effect of in-hole roughness on film cooling from a shaped hole［J］. Journal of Turbomachinery， 2017， 139（3）： 031004.
43	BOGARD D G， THOLE K A. Gas turbine film cooling［J］. Journal of Propulsion and Power， 2006， 22（2）： 249-270.
44	STIMPSON C K， SNYDER J C， THOLE K A， et al. Scaling roughness effects on pressure loss and heat transfer of additively manufactured channels［J］. Journal of Turbomachinery， 2017， 139（2）： 021003.
45	WHITEHEAD D S. Effect of mistuning on the vibration of turbo-machine blades induced by wakes［J］. Journal of Mechanical Engineering Science， 1966， 8（1）： 15-21.
46	GAMANNOSSI A， AMERINI A， POGGIALI M， et al. Uncertainty quantification of an aeronautical combustor using a 1-D approach［J］. AIP Conference Proceedings， 2019， 2191（1）： 020083.
47	RUDEY R A， ANTL R J. The Effect of inlet tempera-ture distortion on the performance of a turbo-fan en-gine compressor system［C］∥ 6th Propulsion Joint Specialist Conference. Reston： AIAA， 1970.
48	HAH C， RABE D C， SULLIVAN T J， et al. Effects of inlet distortion on the flow field in a transonic compressor rotor［J］. Journal of Turbomachinery， 1998， 120（2）： 233-246.
49	BOWDITCH D， COLTRIN R. A survey of inlet/engine distortion compatibility［C］// 19th Joint Propulsion Conference. Reston： AIAA， 1983.
50	BEARD P F， SMITH A， POVEY T. Impact of severe temperature distortion on turbine efficiency［J］. Journal of Turbomachinery， 2013， 135（1）： 011018.
51	MEHENDALE A B， EKKAD S V， HAN J C. Mainstream turbulence effect on film effectiveness and heat transfer coefficient of a gas turbine blade with air and CO₂ film injection［J］. International Journal of Heat and Mass Transfer， 1994， 37（17）： 2707-2714.
52	WUNSCH D， HIRSCH C， NIGRO R， et al. Quantification of combined operational and geometrical uncertainties in turbo-machinery design： GT2015-43399 ［R］. New York： ASME， 2015.
53	CHU J， LUCKRING J. Experimental surface pressure data obtained on 65 deg delta wing across Reynolds number and Mach number ranges： NASA-TM-4645［R］. Hampton： NASA Langley Research Center， 1996.
54	刘永泉，梁彩云，施磊，等. 航空燃气轮机总体设计［M］. 北京：科学出版社， 2021： 22-30.
	LIU Y Q， LIANG C Y， SHI L， et al. Overall design of aircraft gas turbine engines ［M］. Beijing： Science Press， 2021： 22-30 （in Chinese）.
55	SMITH C F， LAPP B， GLAVICIC M. Uncertainty quantification of material mechanical properties using surrogate models［C］∥ 17th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference. Reston： AIAA， 2016.
56	程荣辉. 轴流压气机设计技术的发展［J］. 燃气涡轮试验与研究， 2004， 17（2）： 1-8.
	CHENG R H. Development of design technology for axial compressor［J］. Gas Turbine Experiment and Research， 2004， 17（2）： 1-8 （in Chinese）.
57	KOCH C C， SMITH L H. Loss sources and magnitudes in axial-flow compressors［J］. Journal of Engineering for Power， 1976， 98（3）： 411-424.
58	ÇETIN M， UECER A S， HIRSCH C. Application of modified loss and deviation correlations to transonic axial compressors： AGARD R-745［R］. Paris： AGARD， 1987.
59	WEI N. Significance of loss models in aerothermodynamic simulation for axial turbines［D］. Stockholm： Royal Institute of Technology， 2000.
60	POTI N D， RABE D C. Verification of compressor data accuracy by uncertainty analysis and testing methods［J］. Journal of Turbomachinery， 1988， 110（2）： 265-269.
61	AUTE V， MARTIN C. A comprehensive evaluation of regression uncertainty and the effect of sample size on the AHRI-540 method of compressor performance representation［C］∥Proceedings of the Twenty-Third International Compressor Engineering Conference at Purdue， 2016：1-9.
62	STILES R J. An example of uncertainty analysis in compressor testing： USAFA-TR-83-2［R］. Colorado Springs： Air Force Academy， 1983.
63	REAGAN M T， NAJM H N， GHANEM R G， et al. Uncertainty quantification in reacting-flow simulations through non-intrusive spectral projection［J］. Combustion and Flame， 2003， 132（3）： 545-555.
64	DENTON J D. Some limitations of turbomachinery CFD： GT2010-22540［R］. New York： ASME， 2010.
65	王永明，卫刚，兰发祥，等. 航空发动机设计体系的建设与发展［J］. 燃气涡轮试验与研究， 2007， 20（3）： 1-7.
	WANG Y M， WEI G， LAN F X， et al. Constructing and developing of aeroengine design system［J］. Gas Turbine Experiment and Research， 2007， 20（3）： 1-7 （in Chinese）.
66	罗佳奇，陈泽帅，曾先. 考虑几何设计参数不确定性影响的涡轮叶栅稳健性气动设计优化［J］. 航空学报， 2020， 41（10）： 123826.
	LUO J Q， CHEN Z S， ZENG X. Robust aerodynamic design optimization of turbine cascades considering uncertainty of geometric design parameters［J］. Acta Aeronautica et Astronautica Sinica， 2020， 41（10）： 123826.
67	GABREL V， MURAT C， THIELE A. Recent advances in robust optimization： An overview［J］. European Journal of Operational Research， 2014， 235（3）：471-483.
68	ZHU D， ZHOU J， LIU C， et al. A short review of reliability-based design optimization［J］. IOP Conference Series： Materials Science and Engineering， 2021， 1043（3）：032041.
69	刘永泉，黎旭，任文成，等. 数字孪生助力航空发动机跨越发展［J］. 航空动力， 2021（2）：24-29.
	LIU Y Q， LI X， REN W C， et al. Digital twin boosting leap-forward development of aero engine［J］. Aerospace Power， 2021（2）： 24-29 （in Chinese）.

[1]	Zhihao LI, Biao ZHANG, Jian LI, Chuanlong XU, Zhaolong SONG. Reconstruction of three-dimensional refractive index field of premixed swirl combustion flame [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2023, 44(4): 126480-126480.
[2]	NIU Guangyue, DUAN Fajie, ZHOU Qi, LIU Zhibo. A dynamic measurement method of blade tip clearance based on microwave phase difference ranging [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2022, 43(9): 625396-625396.
[3]	YANG Xiaowei, GE Yaowen, DENG Wenxiang, YAO Jianyong, ZHOU Ning. Active fault-tolerant control for hydraulic actuating cylinders of aeroengine guide vane control mechanisms [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2022, 43(9): 625464-625464.
[4]	DUAN Fajie, NIU Guangyue, ZHOU Qi, FU Xiao, JIANG Jiajia. A review of online blade tip clearance measurement technologies for aeroengines [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2022, 43(9): 626014-626014.
[5]	ZHAO Huan, GAO Zhenghong, XIA Lu. Efficient robust aerodynamic design optimization method for high-speed NLF airfoil [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2022, 43(1): 124894-124894.
[6]	HUANG Jiangtao, LIU Gang, GAO Zhenghong, ZHOU Zhu, CHEN Zuobin, JIANG Xiong. Current situation and development trend of multidisciplinary coupled adjoint system for aircraft [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2020, 41(5): 623404-623404.
[7]	ZHU Donglei, CHEN Guoding, LI Yanjun, ZHANG Chaoyang. Inner ring oil flow and lubrication efficiency analysis of intershaft bearing [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2019, 40(11): 423022-423022.
[8]	WANG Jing, LUO Ming, WU Baohai, ZHANG Dinghua. A trochoidal path planning method for rough machining of aeroengine casing parts [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2018, 39(6): 421814-421814.
[9]	SONG Fuqiang, YAN Chao, MA Baofeng, JU Shengjun. Uncertainty analysis of aerodynamic characteristics for cone-derived waverider configuration [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2018, 39(2): 121519-121519.
[10]	HU Jinhai, XIA Chao, PENG Jingbo, ZHANG Yu, REN Litong. Fusion diagnosis method based on neighboring modular weighted D-S [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2016, 37(4): 1174-1183.
[11]	SUN Hengchao, CHEN Guoding, WANG Li'na, WANG Fei. Oil droplets fractions and oil droplets/air energy transfer analysis in bearing chamber [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2016, 37(3): 1060-1073.
[12]	LI Yan, ZHANG Shuguang, GONG Qi. An improved probabilistic risk assessment method of structural parts for aeroengine [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2016, 37(2): 597-608.
[13]	LI Zhiping, WANG Mengqi. Airworthiness certification method for aeroengine on stall and surge with inlet distortion [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2015, 36(9): 2947-2957.
[14]	ZOU Zhengping, LIU Huoxing, TANG Hailong, WAN Min, WANG Hongwei, CHEN Xiaolong, CHEN Maozhang. Precooling technology study of hypersonic aeroengine [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2015, 36(8): 2544-2562.
[15]	LIU Deng, CHEN Guoding, FANG Long, SUN Hengchao. State identification and characteristics analysis of oil droplet's oblique impact onto solid wall [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2015, 36(4): 1359-1366.

Uncertainty⁃based design system for aeroengines

RichHTML

PDF (PC)

Knowledge

Abstract

Cite this article

share this article

Figures/Tables 13

References 69

Related Articles 15

Recommended Articles

Metrics

Comments