价值驱动设计方法及其在商用飞机方案参数优化中的应用

doi:10-7527/S1000-6893.2019.23583

固体力学与飞行器总体设计

本期目录 | 过刊浏览 | 高级检索

前一篇 | 后一篇

价值驱动设计方法及其在商用飞机方案参数优化中的应用

李少伟, 宋文滨

上海交通大学航空航天学院, 上海 200240

收稿日期:2019-10-14 修回日期:2019-11-04 出版日期:2020-07-15 发布日期:2020-07-28
通讯作者: 宋文滨 E-mail:swb@sjtu.edu.cn

Value driven methodology and its application in optimal sizing of commercial aircraft preliminary design

LI Shaowei, SONG Wenbin

School of Aeronautics and Astronautics, Shanghai Jiao Tong University, Shanghai 200240, China

Received:2019-10-14 Revised:2019-11-04 Online:2020-07-15 Published:2020-07-28

摘要/Abstract

摘要： 商用飞机方案设计是一项复杂的任务，不同目标函数和约束条件得到不同的设计，需要在满足安全性要求的前提下取得飞机技术性能和商业收益之间的双赢。本研究运用价值驱动设计（VDD）理念，实现系统工程方法与多学科优化设计方法的紧密耦合，通过灵活的可定制、多层级的程序架构，建立了基于剩余价值（SV）模型的飞机设计优化框架。针对典型任务，使用该框架开展了针对飞机的剩余价值函数最大化的优化设计，并对比了针对直接使用成本（DOC）最小化进行优化得到的结果。结果分析表明，基于剩余价值模型的优化设计方案能够兼顾更多的利益相关方，改善飞机的经济性。飞机直接使用成本最小化的设计方案需要和价值最大化的设计综合考虑，以实现飞机使用经济性和产业经济性的协调，这对于新兴飞机制造商尤为重要。

关键词: 价值驱动设计, 剩余价值, 直接使用成本, 飞机方案设计, 经济性设计

Abstract: The development of commercial aircraft is a complex task. Different objective functions and constraints lead to different designs. It is necessary to obtain a win-win solution between the technical performance and commercial benefits of the aircraft while meeting the safety requirements. Using a Value-Driven Design (VDD) methodology, this study achieves a close coupling between the system engineering method and the multidisciplinary optimization design. Through a flexible and customized aircraft design program, a design optimization framework based on the Surplus Value (SV) model is developed. This framework is used to carry out an optimization design of maximizing the surplus value of the aircraft for a typical flight mission. The results are compared with those obtained by optimizing the minimum Direct Operating Cost (DOC). The results show that design with minimum direct operating cost produces less competitive surplus value. The surplus value model provided better coordination among aircraft operating economics and industrial economics and can be used to obtain better and more balanced aircraft design. Such a methodology is crucial for emerging aircraft manufacturers.

Key words: value-driven design, Surplus Value (SV), Direct Operating Cost (DOC), aircraft preliminary design, economics design

中图分类号:

V221

李少伟, 宋文滨. 价值驱动设计方法及其在商用飞机方案参数优化中的应用[J]. 航空学报, 2020, 41(7): 223583-223583.

LI Shaowei, SONG Wenbin. Value driven methodology and its application in optimal sizing of commercial aircraft preliminary design[J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2020, 41(7): 223583-223583.

参考文献 26

[1]	CHAKRABORTY I, GROSS J R.Analysis of the effect of cruise speed on fuel efficiency and cost for a truss-braced wing concept[C]//14th AIAA Aviation Technology, Integration, and Operations Conference. Reston:AIAA, 2014.
[2]	DESAI A A, VENGADASALAM L, HOLLINGSWORTH P, et al. Value-driven design framework for competitive aviation markets[J]. Journal of Aircraft, 2019, 56(4):1658-1667.
[3]	MONCEAUX A, KOSSMAN M, WISEALL S, et al. Overview of value driven design research:Methods, applications and relevance for conceptual design[J]. Insight, 2014, 17(4):37-39.
[4]	KANNAN H, SHIHAB S, ZELLNER M, et al.Preference modeling for government-owned large-scale complex engineered systems:A satellite case study[M].Berlin Heidelberg:Springer International Publishing, 2018:513-529.
[5]	BURGAUD F, POKHREL M, MAVRIS D N. A business-driven optimization methodology applied to commercial aviation programs[C]//55th AIAA Aerospace Sciences Meeting. Reston:AIAA, 2017.
[6]	COLLOPY P D, HOLLINGSWORTH P M. Value-driven design[J]. Journal of Aircraft, 2011, 48(3):749-759.
[7]	KELLER S, COLLOPY P. Value modeling for a space launch system[J]. Procedia Computer Science, 2013, 16:1152-1160.
[8]	CHEUNG J, SCANLAN J, WONG J, et al. Application of value-driven design to commercial aeroengine systems[J]. Journal of Aircraft, 2012, 49(3):688-702.
[9]	DESAI A, HOLLINGSWORTH P, CHINCHAPATNAM P. Identifying the best design for uncertain markets[C]//International Council of the Aeronautical Sciences, 2016.
[10]	FANTHORPE C, SOBAN D, PRICE M, et al. Developing a capability function relating aircraft systems cost overruns to aircraft design parameters[C]//11th AIAA Aviation Technology, Integration, and Operations (ATIO) Conference. Reston:AIAA, 2011.
[11]	LEE M, LARRY K, SONG W B. Analysis of direct operating cost of wide-body passenger aircraft:A parametric study based on Hong Kong[J]. Chinese Journal of Aeronautics, 2019, 32(5):1222-1243.
[12]	HOLLINGSWORTH P. An investigation of value modelling for commercial aircraft[C]//Air Transport and Operations Symposium. Delft:IOS Press, 2011.
[13]	RAYMER D. Aircraft design:A conceptual approach[M]. Reston:AIAA, 2018:11-24.
[14]	TORENBEEK E. Advanced aircraft design:Conceptual design, analysis and optimization of subsonic civil airplanes[M]. New York:John Wiley & Sons, 2013:229-257.
[15]	张锡金. 飞机设计手册第6册:气动设计[M]. 北京:航空工业出版社, 2002. ZHANG X J. Aircraft design manual volume 6:Aerodynamics design[M]. Beijing:Aviation Industry Press, 2002(in Chinese).
[16]	LEVENSON G, BOREN JR H, TIHANSKY D P, et al. Cost-estimating relationships for aircraft airframes[R]. Santa Monica:RAND Corppration, 1972.
[17]	程不时. 飞机设计手册第5册:民用飞机总体设计[M]. 北京:航空工业出版社, 2002. CHENG B S. Aircraft design manual volume 5:Commercial aircraft design[M]. Beijing:Aviation Industry Press, 2002(in Chinese).
[18]	莫庆华. 民用飞机使用经济性分析方法及软件系统[D].上海:上海交通大学, 2011:31-56. MO Q H. Civil airplane operating economical analysis methods and software system[D]. Shanghai:Shanghai JiaoTong University, 2011:31-56(in Chinese).
[19]	赵楠, 宋文滨. 面向经济性的商用飞机设计方法及其在新技术评估中的应用[J]. 南昌航空大学学报:自然科学版, 2013, 27(4):65-71. ZHAO N, SONG W B.Framework for DOC-driven civil aircraft conceptual design and its application on economic evaluation of new technologies[J]. Journal of Nanchang Hangkong University(Natural Sciences), 2013, 27(4):65-71(in Chinese).
[20]	JOHNSON V S. Minimizing life cycle cost for subsonic commercial aircraft[J]. Journal of Aircraft, 1990, 27(2):139-145.
[21]	PAPAGEORGIOU E, ERES M H, SCANLAN J. Value modelling for multi-stakeholder and multi-objective optimisation in engineering design[J]. Journal of Engineering Design, 2016, 27(10):697-724.
[22]	KEENEY R L, RAIFFA H. Decisions with multiple objectives:Preferences and value trade-offs[M]. Cambridge:Cambridge University Press, 1993:282-353.
[23]	COLLOPY P, COLLOPY P. Surplus value in propulsion system design optimization[C]//33rd Joint Propulsion Conference and Exhibit. Reston:AIAA, 1997.
[24]	MULLAN C, PRICE M, SOBAN D, et al. An analytical study of surplus value using a Value Driven Design methodology[C]//11th AIAA Aviation Technology, Integration, and Operations (ATIO) Conference. Reston:AIAA, 2011.
[25]	Price Information about Airbus and Boeing[EB/OL]. (2019-10-13)[2019-10-14]. https://www.comp.nus.edu.sg/~ipng/mecon/cases/Airbus.pdf.
[26]	Airbus 2018 list price information in press release[EB/OL]. (2019-10-13)[2019-10-14]. https://www.airbus.com/newsroom/press-releases/en/2018/01/airbus-2018-price-list-press-release.html.

E-mail：hkxb@buaa.edu.cn

关于我们

期刊社服务

专业学科

封面文章

友情链接

主管单位：中国科学技术协会主办单位：中国航空学会北京航空航天大学

价值驱动设计方法及其在商用飞机方案参数优化中的应用

Value driven methodology and its application in optimal sizing of commercial aircraft preliminary design

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献 26

相关文章 15

编辑推荐

Metrics

本文评价

[1]	王琪武龙刘振刘建霞夏凉. 热弹性多构型梯度点阵结构拓扑优化设计[J]. 航空学报, 0, (): 0-0.
[2]	许敉, 毛泽钡, 王博, 李桐. 快速优化薄板中各向异性材料分布的等效变形模量算法[J]. 航空学报, 2024, 45(10): 229273-229273.
[3]	柳家齐, 陈荣钱, 楼锦华, 韩旭, 吴昊, 尤延铖. 基于深度学习的高速直升机旋翼翼型气动优化设计[J]. 航空学报, 2024, 45(9): 529828-529828.
[4]	许杰黄永畅郭翔鹰. 较大尺度波长结节翼在临界角附近的特性分析-增刊[J]. 航空学报, 0, (): 0-0.
[5]	戴今钊, 陈海昕. 流场波系引导的三维消波翼优化设计方法[J]. 航空学报, 2024, 45(6): 628942-628942.
[6]	陈树生, 贾苜梁, 刘衍旭, 高正红, 向星皓. 变体飞行器变形方式及气动布局设计关键技术研究进展[J]. 航空学报, 2024, 45(6): 629595-629595.
[7]	安朝, 霍贵玺, 孟杨, 谢长川, 杨超. 翼尖铰接组合式无人机气动建模方法及布局参数影响[J]. 航空学报, 2024, 45(6): 629587-629587.
[8]	刘柳, 向先宏, 张宇飞, 陈海昕, 魏闯, 朱剑, 杨普. 一种高升阻比非常规翼身融合燕尾气动布局[J]. 航空学报, 2024, 45(6): 629630-629630.
[9]	王海峰. 高性能战斗机与发动机协同设计关键技术[J]. 航空学报, 2024, 45(5): 529978-529978.
[10]	李昊达, 龙腾, 史人赫, 叶年辉. 基于样本映射与动态Kriging的飞行器离散连续优化方法[J]. 航空学报, 2024, 45(3): 228726-228726.
[11]	王嘉鑫宣建林杨晓君郑睿. 具备多模态运动能力的扑翼飞行器研究进展[J]. 航空学报, 0, (): 0-0.
[12]	姚远戴雨可徐一鸣. 考虑不确定性的太阳能无人机总体参数设计[J]. 航空学报, 0, (): 0-0.
[13]	何程童玉奇夏兴禄陈刚. 面向货运任务的混电垂直起降无人机能量管理策略和任务路径综合优化[J]. 航空学报, 0, (): 0-0.
[14]	张旭辉, 解春雷, 刘思佳, 闫溟, 邢思远. 智能变形飞行器发展需求及难点分析[J]. 航空学报, 2023, 44(21): 529302-529302.
[15]	武宇飞, 龙腾, 史人赫, 张尧. 跨域变体飞行器气动力热非层次多模型融合降阶方法[J]. 航空学报, 2023, 44(21): 528259-528259.