航空学报 > 2026, Vol. 47 Issue (19): 133061-261330610   doi: 10.7527/S1000-6893.2025.33061

热化学非平衡流动自适应松弛耦合模拟方法

丁明松1,2, 刘庆宗2, 江涛1,2(), 李鹏1,2, 梅杰1,2, 傅杨奥骁1,2   

  1. 1.空天飞行空气动力科学与技术全国重点实验室,绵阳 621000
    2.中国空气动力研究与发展中心 计算空气动力研究所,绵阳 621000
  • 收稿日期:2025-11-07 修回日期:2025-12-08 接受日期:2025-12-22 出版日期:2025-12-31 发布日期:2025-12-29
  • 通讯作者: 江涛 E-mail:fengqiaoren999@163.com
  • 基金资助:
    国家数值风洞工程

Adaptive relaxation coupling simulation method for thermochemical non-equilibrium flow

Mingsong DING1,2, Qingzong LIU2, Tao JIANG1,2(), Peng LI1,2, Jie MEI1,2, Aoxiao FU-YANG1,2   

  1. 1.State Key Laboratory of Aerodynamics,Mianyang 621000,China
    2.Computational Aerodynamics Institute,China Aerodynamics Research and Development Center,Mianyang 621000,China
  • Received:2025-11-07 Revised:2025-12-08 Accepted:2025-12-22 Online:2025-12-31 Published:2025-12-29
  • Contact: Tao JIANG E-mail:fengqiaoren999@163.com
  • Supported by:
    National Numerical Wind Tunnel Project

摘要:

高速飞行器热化学非平衡数值模拟效率一直都是工程应用的痛点问题之一。结合热化学非平衡流动模拟耗时分析,通过流场特征或迭代特征的捕捉与判断,建立了热化学非平衡流动自适应松弛耦合模拟方法,开展了不同参数不同物理化学模型、不同热化学非平衡流动特征下自适应松弛耦合模拟精准度和效率的测试分析。研究表明:当前条件下,非平衡源项及其矩阵、多组分气体能量函数和输运系数的计算耗时占比最高可达62.04%;基于耗时分析建立的自适应松弛耦合模拟方法,能显著提升数值模拟的计算效率,计算时间最多可节省45.70%。该方法优点在于:不会降低数值迭代的收敛性和准确性,具有与全物理模型耦合模拟同等的计算保真度;无需动态改变计算域,且无需逻辑结构或计算流程大幅调整,易于在各种静态或动态的软件构架体系上实现。该方法在物理化学模型精细时效果更为显著,能在一定程度上解决复杂工程问题计算精准度和效率难以兼顾的痛点。

关键词: 高速流动, 高温气体效应, 热化学非平衡, 自适应松弛耦合, 高速飞行器

Abstract:

The efficiency of numerical simulation for thermochemical non-equilibrium flow of hypersonic vehicles has always been one of the pain points in engineering applications. Based on the time-consuming analysis of thermochemical non-equilibrium flow simulation, an adaptive relaxation coupling simulation method of thermochemical non-equilibrium flow was established by capturing and judging the flow field characteristics or iterative characteristics. The accuracy and efficiency of the adaptive relaxation coupling simulation method were tested and analyzed under different parameters, different physical and chemical models, as well as different thermochemical non-equilibrium flow characteristics. The results show that, the calculation time-consuming ratio of non-equilibrium source term and its Jacobian matrices processing, multi-component gas energy function and transport coefficient could reach 62.04% under the current conditions. The adaptive relaxation coupling simulation method established based on time-consumption analysis can significantly enhance computational efficiency, reducing computational time by up to 45.70%. The proposed method does not reduce the convergence and accuracy of numerical iteration, and has the same calculation fidelity and accuracy as the coupling simulation method of full physical models. It can be easily implemented on various static or dynamic software architectures without changing the computational domain dynamically and adjusting the logical structure or computational flow greatly. This method is more effective in fine physical and chemical model, and can partly solve the difficulty of balancing computational accuracy and efficiency of complex engineering problems.

Key words: hypersonic flow, high temperature gas effect, thermochemical non-equilibrium, adaptive relaxation coupling, hypersonic vehicles

中图分类号: