航空学报 > 2021, Vol. 42 Issue (2): 624043-624043   doi: 10.7527/S1000-6893.2020.24043

先进空间运输系统气动设计专栏

面对称重复使用运载器尾部喷流风洞试验

刘杰平1, 马元宏1, 蔡巧言1, 任少洁2, 王苏宁2, 杨子盟2   

  1. 1. 中国运载火箭技术研究院, 北京 100076;
    2. 中国航天空气动力技术研究院, 北京 100074
  • 收稿日期:2020-03-31 修回日期:2020-04-18 发布日期:2020-05-21
  • 通讯作者: 刘杰平 E-mail:liujp_calt@163.com
  • 基金资助:
    国家自然科学基金(U20B2006)

Wind tunnel experiment on supersonic exhaust flow of symmetric reusable space vehicles

LIU Jieping1, MA Yuanhong1, CAI Qiaoyan1, REN Shaojie2, WANG Suning2, YANG Zimeng2   

  1. 1. China Academy of Launch Vehicle Technology, Beijing 100076, China;
    2. China Academy of Aerospace Aerodynamics, Beijing 100074, China
  • Received:2020-03-31 Revised:2020-04-18 Published:2020-05-21
  • Supported by:
    National Natural Science Foundation of China(U20B2006)

摘要: 研究面对称重复使用运载器尾部发动机的喷流干扰特性对于飞行器设计具有重要意义。在中国航天空气动力技术研究院的FD-12风洞中开展了亚/跨声速飞行条件下的喷流试验。试验使用常温压缩空气作为喷流介质模拟发动机的高温燃气,采用的相似参数包括:飞行器的几何外形尺寸、飞行器的飞行马赫数、发动机喷管的出口马赫数、发动机喷流与自由来流静压比。试验结果表明了发动机喷流对全飞行器气动特性和体襟翼铰链力矩的影响随来流马赫数、喷管、体襟翼偏角等因素的变化规律。

关键词: 面对称重复使用运载器, 发动机喷流, 体襟翼, 亚/跨声速, 风洞试验

Abstract: The characteristics of engine-jet interference are highly significant for the design of symmetric reusable vehicles. A jet experiment under the condition of subsonic/transonic flight was performed in the wind tunnel FD-12 at China Academy of Aerospace Aerodynamics. This experiment used the normal temperature compressed air as the high temperature fuel gas of the engine-jet. Similar parameters of the experiment include geometry dimensions of the vehicle, flight Mach number of the vehicle, Mach number of the exit on the engine nozzle, and the static pressure ratio of the engine nozzle exit to the faraway inflow. Experimental results show that the engine-jet effect on the aerodynamic characteristics of the vehicle and the hinge moment of the body flap varies with the Mach number of inflow, the deflection angle of the nozzle, and the body flap.

Key words: symmetric reusable vehicles, engine jet, body flap, subsonic/transonic, wind tunnel experiment

中图分类号: