[1] BURCHAM S, FRANK W. An investigation of two variations of the gas generator method to calculate the thrust of the afterburning turbo fan engines installed in an F-111A airplane:NASA TND-6297[R]. Washington,D.C.:NASA, 1971.[2] PAUL W C. A comprehensive approach to in-flight thrust determination:NATC-TM-79-3[R]. Washington,D.C.:NASA, 1994.[3] RAY R J. Evaluating the dynamic response of in-flight thrust calculation techniques during throttle transients:NASA TM-4591[R]. Washington,D.C.:NASA, 1994.[4] THOMAS B. The F/A-18 high-AOA research vehicle with thrust-vectoring control system:NASA TM-5097[R]. Washington,D.C.:NASA, 1996.[5] 廉小纯, 刘选民, 陈辅群, 等. 飞机飞行中发动机推力的测定[J]. 航空动力学报, 1994, 9(1):1-4. LIAN X C, LIU X M, CHEN F Q, et al. A method for determining aircraft engine gross thrust in flight[J]. Journal of Aerospace Power, 1994, 9(1):1-4(in Chinese).[6] 高扬, 王朝蓬, 屈霁云, 等. 某型大涵道比涡扇发动机飞行推力确定方法研究[J]. 航空发动机, 2011, 12(4):46-49. GAO Y, WANG Z P, QU J Y, et al. Study of in-flight thrust determination method for a high bypass turbofan engine[J]. Aeroengine, 2011, 12(4):46-49(in Chinese).[7] 廖明夫, 段曙光, 李颖峰. 转子扭转振动测量的新方法[J]. 航空学报, 2006, 27(3):525-530. LIAO M F, DUAN S G, LI Y F. New method to measure the torsional vibration of rotor[J]. Acta Aeronautica et Astronautica Sinica, 2006, 27(3):525-530(in Chinese).[8] TIMOTHY R, ROBER L. Full flight envelope direct thrust measurement on a supersonic aircraft:NASA-TM/206560[R]. Washington, D.C.:NASA, 1998.[9] JOHN S. Initial flight test evaluation of the F-15 ACTIVE axisymmetric vectoring nozzle performance[R]. Washington, D.C.:NASA, 1998.[10] JOHN S, ROBERT L. Selected performance measurement of the F-15 ACTIVE axisymmetric thrust-vectoring nozzle:19990071396[R]. Washington, D.C.:NASA, 1999.[11] AGARD T W. In-flight thrust determination:SAE AIR 170[R]. Washington, D.C.:NASA, 2014.[12] 杜鹤龄. 航空发动机推力的测量和确定方法[J]. 航空动力学报, 1997, 12(4):389-392. DU H L. Measurement and determination of aero engine thrust[J]. Journal of Aerospace Power, 1997, 12(4):389-392(in Chinese).[13] 张强, 邓小宝, 张永峰, 等. 航空发动机推力直接测试技术试验与研究[J]. 测控技术, 2011, 30:60-62. ZHANG Q, DENG X B, ZHANG Y F, et al. Test and research of aero-engine direct thrust measurement[J]. Measurement & Control Technology, 2011, 30:60-62(in Chinese).[14] 牛宏伟, 张强, 雷晓波. 基于参数化有限元的发动机推力销强度包线计算与分[J]. 燃气涡轮试验与研究, 2016, 29(3):35-38. NIU H W, ZHANG Q, LEI X B. Structural reliability analysis of an aero-engine thrust pin based on parametric FEM[J].Gas Turbine Experiment and Research, 2016, 29(3):35-38(in Chinese).[15] 雷晓波, 张强, 张永峰. 航空发动机推力销载荷计算及应变分析[J]. 机械研究与应用, 2014, 27(4):32-34. LEI X B, ZHANG Q, ZHANG Y F. Aero-engine thrust pin load calculation and strain analysis[J]. Mechanical Research & Application, 2014, 27(4):32-34(in Chinese).[16] 郭海东, 张强, 张永峰, 等. 航空发动机推力销水平推力校准试验技术研究[J]. 机械研究与应用, 2014, 27(5):38-40. GUO H D, ZHANG Q, ZHANG Y F, et al. Research on horizontal thrust calibration test technology for aero-engine thrust pin[J]. Mechanical Research & Application, 2014, 27(5):38-40(in Chinese).[17] 雷晓波, 张强, 刘涛, 等. 基于剪力桥路建立不同载荷与应变的力学方程[J]. 现代机械, 2015(1):54-57. LEI X B, ZHANG Q, LIU T, et al. Mechanics equations of different loads and strains based on shear strain bridge[J]. Modern Machinery, 2015(1):54-57(in Chinese).[18] 曹景涛. 飞机全动式鸭翼载荷飞行测量技术[J]. 航空学报, 2015, 36(4):1135-1141. CAO J T. Aircraft all movable canard load flight measurement technology[J]. Acta Aeronautica et Astronautica Sinica, 2015, 36(4):1135-1141(in Chinese).[19] 谢宇. 回归分析[M]. 北京:社会科学文献出版社, 2010. XIE Y. Regression analysis[M]. Beijing:Social Science Academic Press, 2010(in Chinese).[20] 牛宏伟, 张强. 发动机推力销载荷测量中的温度修正方法研究[J]. 科学技术与工程, 2015, 15(24):198-202. NIU H W, ZHANG Q. Temperature modification method in direct thrust measurement of aero-engine[J]. Science Technology and Engineering, 2015,15(24):198-202(in Chinese).[21] 宋江涛, 邓小宝, 魏海涛. 航空发动机试车台推力仿真技术研究[J].计算机仿真, 2012, 29(1):67-70. SONG J T, DENG X B, WEI H T. Research on simulating test-bed thrusts of aero-engine[J]. Computer Simulation Technology, 2012, 29(1):67-70(in Chinese). |