长期大气腐蚀对2A12-T4铝合金结构疲劳性能的影响

doi:10.7527/S1000-6893.2015.0044

材料工程与机械制造

本期目录 | 过刊浏览 | 高级检索

前一篇 | 后一篇

长期大气腐蚀对2A12-T4铝合金结构疲劳性能的影响

张腾, 何宇廷, 高潮, 侯波, 李昌范

空军工程大学航空航天工程学院, 西安 710038

收稿日期:2015-01-07 修回日期:2015-02-06 出版日期:2015-07-15 发布日期:2015-02-10
通讯作者: 何宇廷男, 博士, 教授, 博士生导师。主要研究方向: 飞机结构强度与使用寿命。 Tel: 029-84787082 E-mail: hyt666@tom.com E-mail:hyt666@tom.com
作者简介:张腾男, 博士研究生。主要研究方向: 飞机结构强度与使用寿命。 E-mail: zt_gm@126.com
基金资助:
国家自然科学基金 (51475470, 51201182)

Effect of long-term atmospheric corrosion on fatigue behavior of 2A12-T4 aluminum structures

ZHANG Teng, HE Yuting, GAO Chao, HOU Bo, LI Changfan

Aeronautics and Astronautics Engineering College, Air Force Engineering University, Xi'an 710038, China

Received:2015-01-07 Revised:2015-02-06 Online:2015-07-15 Published:2015-02-10
Supported by:
National Natural Science Foundation of China (51475470, 51201182)

摘要/Abstract

摘要：

开展了2A12-T4铝合金平板试验件、螺栓干涉试验件和冷挤压后螺栓干涉试验件在海南万宁大气环境下暴露腐蚀7年、12年和20年后的疲劳试验,进行了试验件腐蚀形貌分析、断口形貌分析和断口附近的侧边损伤形貌分析,并讨论了结构裂纹萌生位置、结构断裂部位和寿命变化规律等疲劳特征的形成原因和机理。研究结果表明:平板试验件和冷挤压后螺栓干涉试验件在腐蚀20年后的疲劳寿命与腐蚀12年相比基本持平,而螺栓干涉试验件的疲劳寿命持续下降;在长期大气腐蚀环境下结构局部强度的衰减速度排序是:螺栓干涉强化部位>未强化部位>冷挤压后螺栓干涉强化部位;2A12-T4铝合金材料在L-S面中部的腐蚀敏感性与L-S面侧边和L-T面相比更弱;L-S面发生的沿晶腐蚀是疲劳开裂的主要萌生源,长期腐蚀后侧面密集损伤导致的能量分散是使腐蚀20年后平板试验件寿命与腐蚀12年相比无明显下降的主要原因。

关键词: 铝合金, 大气腐蚀, 疲劳寿命, 螺栓干涉, 孔冷挤压

Abstract:

Fatigue tests on 2A12-T4 aluminum alloy plate specimens, bolt interference fitted specimens and bolt interference fitted specimens with cold expansion are carried out after the specimens are exposed in Wanning, Hainan Province for 7 years, 12 years and 20 years. Corrosion morphologies, fatigue morphologies of fracture surfaces and side surfaces beside fracture site are analyzed. Furthermore, origins and mechanisms of fatigue characters, such as the positions of cracks initiate, the fracture sites of specimens, the change laws of fatigue lives, etc., are discussed. The results show that the fatigue lives of plate specimens and interference fitted specimens with cold expansion after being exposed for 20 years are almost the same as those of the specimens exposed for 12 years, while the fatigue lives of interference fitted specimens continue to decrease. The decrease of local intensity ranks in the order: section of interference fitted hole > section of untreated material > section of interference fitted hole with cold expansion. The corrosion susceptibility on the mid-area of L-S surface is weaker than that of L-T surface and on the side-area of L-S surface. The sites where intergranular corrosion occurs on the L-S surface become potential sources of fatigue cracking, and dense damage on the L-S surface due to long-term atmospheric corrosion is the main cause that the fatigue lives of plate specimens and interference fitted specimens with cold expansion do not decrease after 20 years of exposure than 12 years.

Key words: aluminum alloy, atmospheric corrosion, fatigue life, bolt interference fitted, hole cold expansion

中图分类号:

V252.2
TG171

张腾, 何宇廷, 高潮, 侯波, 李昌范. 长期大气腐蚀对2A12-T4铝合金结构疲劳性能的影响[J]. 航空学报, 2015, 36(7): 2444-2456.

ZHANG Teng, HE Yuting, GAO Chao, HOU Bo, LI Changfan. Effect of long-term atmospheric corrosion on fatigue behavior of 2A12-T4 aluminum structures[J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2015, 36(7): 2444-2456.

参考文献

[1] Wang Z Y, Ma T, Han W, et al. Corrosion behavior on aluminum alloy LY12 in simulated atmospheric corrosion process[J]. Transactions of Nonferrous Metals Society of China, 2007, 17(2): 326-334.
[2] Hu Y L, Li D, Guo B L. Statistical study of corrosion dynamics law and method to predict calendar life for LY12CZ aluminum alloy[J]. Acta Aeronautica et Astronautica Sinica, 2000, 21(Sup.): S53-S57 (in Chinese). 胡艳玲, 李狄, 郭宝兰. LY12CZ铝合金型材的腐蚀动力学统计规律研究及日历寿命预测方法探讨[J]. 航空学报, 2000, 21(增刊): S53-S57.
[3] Xie W J, Li D, Hu Y L, et al. Statistical study of corrosion kinetics law for LY12CZ and 7075T7351 aluminum alloy in EXCO solution[J]. Acta Aeronautica et Astronautica Sinica, 1999, 20(1): 34-38 (in Chinese). 谢伟杰, 李狄, 胡艳玲, 等. LY12CZ和7075T7351铝合金在EXCO溶液中腐蚀动力学的统计研究[J]. 航空学报, 1999, 20(1): 34-38.
[4] Li C Y, Zhu L Q, Liu H C, et al. Influence of temperature on initial corrosion behavior of aluminum alloy 2A12 in simulated tank water environment[J]. Acta Aeronautica et Astronautica Sinica, 2013, 34(6): 1493-1500 (in Chinese). 李晨钰, 朱立群, 刘慧丛, 等. 温度对2A12铝合金在模拟油箱积水环境中初期腐蚀行为的影响[J]. 航空学报, 2013, 34(6): 1493-1500.
[5] Wang B B, Wang Z Y, Han W, et al. Effects of magnesium chloride-based multicomponent salts on atmospheric corrosion of aluminum alloy 2024[J]. Transactions of Nonferrous Metals Society of China, 2013, 23(4): 1199-1208.
[6] Dan Z, Muto I, Hara N. Effects of environmental factors on atmospheric corrosion of aluminium and its alloy under constant dew point conditions[J]. Corrosion Science, 2012, 57(4): 22-29.
[7] Shi Y Y, Zhang Z, Su J X, et al. Electrochemical noise study on 2024-T3 aluminum alloy corrosion in simulated acid rain under cyclic wet-dry condition[J]. Electrochimica Acta, 2006, 51(23): 4977-4986.
[8] Zhang H W, He Y T, Fan C H, et al. Fatigue life prediction method for aircraft metal material under alternative corrosion/fatigue process[J]. Acta Aeronautica et Astronautica Sinica, 2013, 34(5): 1114-1121 (in Chinese). 张海威, 何宇廷, 范超华, 等. 腐蚀/疲劳交替作用下飞机金属材料疲劳寿命计算方法[J]. 航空学报, 2013, 34(5): 1114-1121.
[9] Moutarlier V, Gigandet M P, Normand B, et al. EIS characterisation of anodic films formed on 2024 aluminium alloy, in sulphuric acid containing molybdate or permanganate species[J]. Corrosion Science, 2005, 47 (4): 937-951.
[10] Gonzalez J A, Morcillo M, Escudero E, et al. Atmospheric corrosion of bare and anodized aluminum in a wide range of environmental conditions[J]. Surface & Coatings Technology, 2002, 153(2-3): 225.
[11] Sun S Q, Zheng Q F, Wen J G. Long-term atmospheric corrosion behavior of aluminum alloys 2024 and 7075 in urban, coastal and industrial environments[J]. Corrosion Science, 2009, 51(4): 719-727.
[12] Wang B B, Wang Z Y, Han W, et al. Atmospheric corrosion of aluminium alloy 2024-T3 exposed to salt lake environment in Western China[J]. Corrosion Science, 2012, 59(6): 63-70.
[13] Wang Z Y, Li Q X, Wang C, et al. Corrosion behaviours of Al alloy LC4 in Gerermu salt lake atmosphere[J]. The Chinese Journal of Nonferrous Metals, 2007, 17(1): 24-29 (in Chinese). 王振尧, 李巧霞, 汪川, 等. LC4铝合金在格里木盐湖大气环境中的腐蚀行为[J]. 中国有色金属学报, 2007, 17(1): 24-29.
[14] Sun S Q, Zheng Q F, Li D F, et al. Exfoliation corrosion of extruded 2024-T4 in the coastal environments in China[J]. Corrosion Science, 2011, 53(8): 2527-2538.
[15] Fuente D D L, Otero-Huerta E, Morcillo M. Studies of long-term weathering of aluminium in the atmosphere[J]. Corrosion Science, 2007, 49(7): 3134-3148.
[16] Yang X H, Yao W X, Chen Y L. Research on mechanical properties of LY12CZ aluminium alloy under calendar corrosion environment[J]. Journal of Mechanical Strength, 2003, 25(2): 227-228 (in Chinese). 杨晓华, 姚卫星, 陈跃良. 日历腐蚀环境下LY12CZ铝合金力学性能研究[J]. 机械强度, 2003, 25(2): 227-228.
[17] Liu J Z, Chen B, Ye X B, et al. Fatigue and crack growth behavior of pre-corroded aluminum alloy 2024-T62 and its life prediction based on fracture mechanics[J]. Acta Aeronautica et Astronautica Sinica, 2011, 32(1): 107-116 (in Chinese). 刘建中, 陈勃, 叶序彬, 等. 含腐蚀预损伤铝合金2024-T62的疲劳断裂行为及基于断裂力学的寿命预测[J]. 航空学报, 2011, 32(1): 107-116.
[18] Mu Z T. The analyzing method for fatigue life of aircraft strucutres under corrosive envieonment[J]. Engineering Science, 2002, 4(3): 68-72 (in Chinese). 穆志韬. 腐蚀环境下飞机结构疲劳寿命的分析方法[J]. 中国工程科学, 2002, 4(3): 68-72.
[19] Jin P, Yang K, Xue Q Z. Fatigue notch factor of corrosion material[J]. Journal of Naval Aeronautical and Astronautical University, 2010, 25(5): 485-492 (in Chinese). 金平, 杨凯, 薛庆増. 腐蚀环境下材料的疲劳缺口系数[J]. 海军航空工程学院学报, 2010, 25(5): 485-492.
[20] Liu H Y, Wang H B, Zhang Y J. Research on effect of pitting corrosion damage on fatigue life of LY12CZ aluminum alloy[J]. Equipment Environmental Engineering, 2010, 7(2): 5-8 (in Chinese). 刘海燕, 王红斌, 张亚娟. 孔腐蚀损伤对LY12CZ铝合金疲劳寿命的影响研究[J]. 装备环境工程, 2010, 7(2): 5-8.
[21] China Aviation Science and Technology Research Institute. Handbook of aircraft structural fatigue fracture strengthing technology[M]. Beijing: Aviation Industry Press, 1993: 6 (in Chinese). 中国航空科学技术研究院. 飞机结构抗疲劳断裂强化工艺手册[M]. 北京: 航空工业出版社, 1993: 6.
[22] Gopalakrishna H D, Narasimha Murthy H N, Krishna M, et al. Cold expansion of holes and resulting fatigue life enhancement and residual stresses in Al 2024 T3 alloy—An experimental study[J]. Engineering Failure Analysis, 2010, 17(2): 361-368.
[23] Liu Y S, Shao X J, Liu J, et al. Finite element method and experimental investigation on the residual stress fields and fatigue performance of cold expansion hole[J]. Materials and Design, 2010, 31(3): 1208-1215.
[24] Wang J, Cao Z Q, Liu J. Numerical simulation for driving an interference-fit fastener[J]. Mechanical Science and Technology for Aerospace Engineering, 2009, 28(4): 527-531 (in Chinese). 王晶, 曹增强, 刘剑. 干涉配合紧固件安装的数值模拟[J]. 机械科学与技术, 2009, 28(4): 527-531.
[25] Zhao C M, Hu H Y, Zhou Y F, et al. Experimental and numerical investigation of residual stresses around cold extrusion hole of ultrahigh strength steel[J]. Materials and Design, 2013, 50(9): 78-84.
[26] Semari Z, Aid A, Benhamena A, et al. Effect of residual stresses induced by cold expansion on the crack growth in 6082 aluminum alloy[J]. Engineering Fracture Mechanics, 2013, 99(2): 159-168.
[27] Yan W Z, Wang X S, Gao H S, et al. Effect of split sleeve cold expansion on cracking behaviors of titanium alloy TC4 holes[J]. Engineering Fracture Mechanics, 2012, 88(7): 79-89.
[28] Zhang K, Gong P, Song D Y, et al. Effects of cold hole-expansion on microstructure and fatigue property of 7055-T7751 aluminum alloy plate[J]. Journal of Aeronautical Materials, 2010, 30(5): 44-48 (in Chinese). 张坤, 龚澎, 宋德玉, 等. 孔挤压强化对超高强7055-T7751厚板组织性能的影响[J]. 航空材料学报, 2010, 30(5): 44-48.
[29] Yanishevsky M, Li G, Shi G Q, et al. Fractographic examination of coupons representing aircraft structural joints with and without hole cold expansion[J]. Engineering Failure Analysis, 2013, 30(2): 74-90.
[30] Tian X Y, Liu Y. Influence of interference-fit riveting on fatigue strength[J]. Journal of Civil Aviation University of China, 2006, 24(4): 9-10 (in Chinese). 田秀云, 刘永. 干涉配合铆接对疲劳强度的影响[J]. 中国民航学院学报, 2006, 24(4): 9-10.
[31] Wu H. On the prediction of initiation life for fatigue crack emanating from small cold expanded holes[J]. Journal of Materials Processing Technology, 2012, 212(9): 1819-1824.
[32] Iron and Steel Research Institute. GB/T 19747—2005/ISO 7441:1984 Corrosion of metals and alloys—Determination of bimetallic corrosion in outdoor exposure corrosion tests[S]. Beijing: Standards Press of China, 2005 (in Chinese). 钢铁研究总院. GB/T 19747—2005/ISO 7441:1984金属和合金的腐蚀——双金属室外暴露腐蚀试验[S]. 北京: 中国标准出版社, 2005.
[33] Iron and Steel Research Institute. GB/T 16545—1996/ISO 8407:1991 Corrosion of metals and alloys—Removal of corrosion products from corrosion test specimens[S]. Beijing: Standards Press of China, 1996 (in Chinese). 钢铁研究总院. GB/T 16545—1996/ISO 8407:1991金属和合金的腐蚀——腐蚀试样上腐蚀产物的清除[S]. 北京: 中国标准出版社, 1996.
[34] Wang B T. Study on structural fatigue calendar life and its probability[D]. Xi'an: Northwestern Polytechnical University, 2000 (in Chinese). 王斌团. 结构疲劳日历寿命及其概率研究[D]. 西安: 西北工业大学, 2000.
[35] Chakherlou T N, Taghizadeh H, Aghdam A B. Experimental and numerical comparison of cold expansion and interference fit methods in improving fatigue life of holed plate in double shear lap joints[J]. Aerospace Science and Technology, 2013, 29(1): 351-362.
[36] Zhang T, He Y T, Gao C, et al. Corrosion damage rule of 2A12-T4 aluminum alloy under long-term atmospheric corrosion[J]. Acta Aeronautica et Astronautica Sinica, 2015, 36(2): 661-667 (in Chinese). 张腾, 何宇廷, 高潮, 等. 2A12-T4铝合金长期大气腐蚀损伤规律[J]. 航空学报, 2015, 36(2): 661-667.
[37] Song F X, Zhang X M, Liu S D, et al. Anisotropy of localized corrosion in 7075-T7451 Al alloy thick plate[J]. Transactions of Nonferrous Metals Society of China, 2013, 23(9): 2483-2490.
[38] Wloka J, Hack T, Virtanen S. Influence of temper and surface condition on the exfoliation behaviour of high strength Al-Zn-Mg-Cu alloys[J]. Corrosion Science, 2007, 49(3): 1437-1449.

E-mail：hkxb@buaa.edu.cn

关于我们

期刊社服务

专业学科

封面文章

友情链接

主管单位：中国科学技术协会主办单位：中国航空学会北京航空航天大学

长期大气腐蚀对2A12-T4铝合金结构疲劳性能的影响

Effect of long-term atmospheric corrosion on fatigue behavior of 2A12-T4 aluminum structures

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价

[1]	高同州, 贺小帆, 王晓雷, 李紫光, 朱振涛, 詹志新. 基于CDM理论与SVM模型的2014-T6铝合金疲劳寿命预测[J]. 航空学报, 2024, 45(7): 228952-228952.
[2]	张福泽. 全机日历寿命确定及相关问题[J]. 航空学报, 2024, 45(3): 229863-229863.
[3]	应岳峰, 陈琪昊, 王卫东, 毛欣宇. 焊丝超声振动对铝合金熔化极气体保护焊缝成形及气孔的影响[J]. 航空学报, 2024, 45(2): 428711-428711.
[4]	唐论, 余圣甫, 郑博, 史玉升, 陈颖. 圆柱面点阵自生Al₂O₃铝合金粉芯丝材开发及应用[J]. 航空学报, 2023, 44(9): 626864-626864.
[5]	林忠钦, 于忠奇, 戴冬华, 樊晓光, 余圣甫, 顾冬冬, 李淑慧, 史玉升. 复杂高筋薄壁构件旋压-增材复合制造技术发展与展望[J]. 航空学报, 2023, 44(9): 627493-627493.
[6]	金士杰, 王志诚, 田鑫, 孙旭, 林莉. 基于半跨模式波的铝合金板底面缺陷TOFD检测[J]. 航空学报, 2023, 44(4): 426674-426674.
[7]	邹田春, 巨乐章, 管玉玺, 李泽钢, 陈红呈. 铺层方式对CFRP⁃Al胶接接头疲劳行为的影响[J]. 航空学报, 2023, 44(18): 428264-428264.
[8]	何盼, 卢超, 石文泽, 朱颖, 陈果, 赵莉萍. 铝合金激光超声表面检测中EMAT接收性能对比[J]. 航空学报, 2023, 44(16): 428085-428085.
[9]	张志强, 勾青泽, 路学成, 王浩, 曹轶然, 郭志永. 高强铝合金CMT+P电弧增材制造熔滴过渡行为[J]. 航空学报, 2023, 44(13): 427881-427881.
[10]	张天刚, 黄嘉浩, 侯晓云, 张志强. 激光清洗铝合金表面复合漆层作用机制[J]. 航空学报, 2023, 44(11): 427656-427656.
[11]	石文泽, 程进杰, 胡硕臻, 卢超, 陈尧. 脉冲压缩在铝薄板电磁超声导波检测中的应用[J]. 航空学报, 2022, 43(3): 425063-425063.
[12]	杨炳鑫, 马运五, 山河, 杨天豪, 孙靖, 李永兵. 2A12-T4铝合金自冲摩擦铆焊接头力学行为研究[J]. 航空学报, 2022, 43(2): 625111-625111.
[13]	李洪亮, 崔展祥, 刘世雄, 马强, 姚亦强, 雷玉成. 6061铝合金超声电弧MIG焊声电特性和工艺[J]. 航空学报, 2022, 43(2): 624969-624969.
[14]	姜春阳, 吴利辉, 常云龙, 薛鹏, 倪丁瑞, 肖伯律, 马宗义. 铝合金与树脂基复合材料的铆接/搅拌摩擦搭接复合焊接[J]. 航空学报, 2022, 43(2): 625190-625190.
[15]	徐孟嘉, 刘博生, 毕晓阳, 王振民. 激光加工双级结构对Al/CFRPEEK接头组织及性能的影响[J]. 航空学报, 2022, 43(2): 624620-624620.