航空学报 > 2015, Vol. 36 Issue (7): 2133-2144   doi: 10.7527/S1000-6893.2014.0322

转速优化旋翼的桨叶气动外形参数优化设计

徐明, 李建波, 韩东   

  1. 南京航空航天大学 直升机旋翼动力学国家级重点实验室, 南京 210016
  • 收稿日期:2014-09-22 修回日期:2014-11-24 出版日期:2015-07-15 发布日期:2014-12-15
  • 通讯作者: 李建波 男, 博士, 研究员, 博士生导师。主要研究方向: 旋翼类飞行器总体设计、直升机气动及飞行动力学研究、旋翼系统设计。 Tel: 025-84895188 E-mail: ljb101@nuaa.edu.cn E-mail:ljb101@nuaa.edu.cn
  • 作者简介:徐明 男, 博士研究生。主要研究方向: 直升机总体设计、旋翼空气动力学、直升机飞行力学。 Tel: 025-84895188 E-mail: xuming18237@nuaa.edu.cn;韩东 男, 博士, 副教授。主要研究方向: 旋翼动力学设计、直升机结构及载荷设计。 Tel: 025-84896444 E-mail: donghan@nuaa.edu.cn
  • 基金资助:

    江苏省普通高校研究生科研创新计划 (CXLX13_164); 中央高校基本科研业务费专项资金; 航空科学基金 (2013ZA52014)

Optimal design for aerodynamic shape parameters of optimum speed rotor

XU Ming, LI Jianbo, HAN Dong   

  1. National Key of Science and Technology on Rotorcraft Aeromechanics, Nanjing University of Aeronautics and Astronautics, Nanjing 210016, China
  • Received:2014-09-22 Revised:2014-11-24 Online:2015-07-15 Published:2014-12-15
  • Supported by:

    Funding of Jiangsu Innovation Program for Graduate Education (CXLX13_164); The Fundamental Research Funds for the Central Universities; Aeronautical Science Foundation of China (2013ZA52014)

摘要:

为了获得转速优化旋翼桨叶的最优气动外形,采用自由尾迹方法计算旋翼入流,以叶素积分法计算桨叶气动力,建立了旋翼气动分析模型,为了保证计算精度及效率,旋翼配平计算采用了二次配平方法。首先分析了不同桨叶气动外形参数对旋翼性能的影响,再利用遗传算法,以悬停效率和前飞需用功率为目标,对转速优化旋翼桨叶的气动外形进行优化设计,得出了转速优化旋翼桨叶的最优气动外形方案。在最优方案的基础上,采用区间因子法分析桨叶外形参数变化对旋翼效率影响的敏感度,根据敏感度值验证了方案的最优性。最后根据设计的最优桨叶气动外形方案,研制了桨叶试验模型,进行了风洞吹风试验,试验结果表明最优桨叶气动外形能使转速优化旋翼的悬停与前飞性能指标达到理论预期值,从而验证了转速优化旋翼桨叶最优气动外形设计的有效性。

关键词: 转速优化, 自由尾迹, 气动外形, 旋翼, 优化设计

Abstract:

An analytical model of rotor aerodynamics has been established in order to achieve the optimal aerodynamic shape parameters of optimum speed rotor; with the model, we computed induced velocity by free-wake theory and calculated rotor aerodynamics by blade element theory. Meanwhile, accuracy and efficiency of this model were guaranteed by using secondary trim method. With the above-mentioned model, we further analyzed the influence of different blade aerodynamic shape parameters on the rotor performance. Using genetic algorithm, aimed at hover efficiency and forward flight required power, we carried out the optimal design for aerodynamic shape parameters of optimum speed rotor and obtained the optimal solution. Then based on the optimal solution, we analyzed the influence of blade shape parameters on the rotor performance sensitivity by interval factor method. The sensitivity value demonstrated the optimality of the solution. Finally, having built the blade model and carried out the wind tunnel test, the results of the test show that optimal design for aerodynamic shape parameters can make hover and forward flight performance of rotor reach the theoretical calculation values, which verify the effectiveness of the optimal design for aerodynamic shape parameters of optimum speed rotor.

Key words: optimum speed rotor, free wake, aerodynamic shape, rotor, optimal design

中图分类号: