[1] Yang Y Z, Yang J L, Fang D N. Research progress on the thermal protection materials and structures in hypersonic vehicles[J]. Applied Mathematics and Mechanics, 2008, 29(1): 47-56. (in Chinese) 杨亚政, 杨嘉陵, 方岱宁. 高超声速飞行器热防护材料与结构的研究进展[J]. 应用数学和力学, 2008, 29(1): 47-56.
[2] Craig C. Air Force X-37B wings into space[J]. Aerospace America, 2010(10): 34-39.
[3] He W S. Review of scramjet engine development[J]. Journal of Rocket Propulsion, 2005, 31(1): 29-32. (in Chinese) 贺武生. 超燃冲压发动机研究综述[J]. 火箭推进, 2005, 31(1): 29-32.
[4] Guo Y S, Jiang W, Lin R S. A novel calorimeter for the determination of the heat sink of endothermic hydrocarbon fuels [J]. Acta Chimica Sinica, 2002, 60(1): 55-59. (in Chinese) 郭永胜, 蒋武, 林瑞森. 新型热量计的研制及其在碳氢燃料热沉测定中的应用[J]. 化学学报, 2002, 60(1): 55-59.
[5] Zhou Y X. Analysis and design on scramjet active cooling system based on heat transfer enhancement[D]. Harbin: School of Energy Science and Engineering, Harbin Institute of Technology, 2007. (in Chinese) 周有新. 超燃冲压发动机再生主动冷却结构强化换热分析与设计[D]. 哈尔滨:哈尔滨工业大学能源科学与工程学院, 2007.
[6] Ren J W, Tan Y H. Thermal protection techniques of ramjet combustor[J]. Journal of Rocket Propulsion, 2006, 32(4): 38-42. (in Chinese) 任加万, 谭永华. 冲压发动机燃烧室热防护技术[J]. 火箭推进, 2006, 32(4): 38-42.
[7] Fry R S. A century of ramjet propulsion technology evolution[J]. Journal of Propulsion and Power, 2004, 20(1): 27-58.
[8] Ruan B, Meng H. Numerical model development and validation for hydrocarbon fuel supercritical heat transfer with endothermic pyrolysis[J]. Acta Aeronautica et Astronautica Sinica, 2011, 32(12): 2220-2226. (in Chinese) 阮波, 孟华. 碳氢燃料裂解吸热反应及超临界传热现象数值模型的构建与验证[J]. 航空学报, 2011, 32(12): 2220-2226.
[9] Liu S, Zhang B M. Effects of active cooling on the metal thermal protection systems[J]. Aerospace Science and Technology, 2011, 15(7): 526-533.
[10] Hua Y X, Wang Y Z, Meng H. Numerical study on turbulent convective heat transfer with n-heptane under supercritical pressures[J]. Acta Aeronautica et Astronautica Sinica, 2010, 31(7): 1324-1330. (in Chinese) 华益新, 王亚洲, 孟华. 超临界压力下正庚烷的湍流传热数值研究[J]. 航空学报, 2010, 31(7): 1324-1330.
[11] Chen Z J, Wang L L, Meng H. Study of heat transfer of cryogenic methane under supercritical pressure with consideration of thermal conduction in engine cooling channel walls[J]. Acta Aeronautica et Astronautica Sinica, 2013, 34(1): 8-18. (in Chinese) 陈尊敬, 王雷雷, 孟华. 考虑发动机冷却通道固壁内耦合导热影响的低温甲烷超临界压力传热研究[J]. 航空学报, 2013, 34(1): 8-18.
[12] Sylvia M J, Matthew J G, Dan L, et al. Development of new TPS at NASA Ames Research Center, AIAA-2008-2560[R]. Reston: AIAA, 2008.
[13] Song K D, Choi S H, Scotti S J. Transpiration cooling experiment for scramjet engine combustion chamber by high heat fluxes [J]. Journal of Propulsion and Power, 2006, 22(1): 96-102.
[14] Takeshi K, Goro M, Yoshio W. Propellant feed system of regeneratively cooled scramjet[J]. Journal of Propulsion and Power, 1991, 7(2): 299-301.
[15] Vermaak N, Valdevit L, Evans A G. Materials property profiles for actively cooled panels: an illustration for scramjet applications[J]. Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science, 2009, 40(4): 877-890.
[16] Bao W, Li X L, Qin J, et al. Modelling and simulation methodology of channel cooling using hydrocarbon fuel as coolant under supercritical pressures[J]. Proceedings of the Institution of Mechanical Engineers Part G-Journal of Aerospace Engineering, 2011, 25(9): 969-984.
[17] Walters F M, Buchmann O A. Heat transfer and fluid flow analysis of hydrogen-cooled panels and manifold systems, NASA-CR-66925[R]. Washington, D.C.: NASA, 1971.
[18] Gnielinski V. New equations for heat and mass-transfer in turbulent pipe and channel flow[J]. International Chemical Engineering, 1976, 16(2): 359-368.
[19] Moody L F, Princeton N J. Friction factors for pipe flow [J]. Tansactions of the ASME, 1944, 66(8): 671-684.
[20] Lorenzo V, Natasha V, Frank W Z, et al. A materials selection protocol for lightweight actively cooled panels[J]. Journal of Applied Mechanics, 2008, 75(6): 061022-1-061022-15. |