基于动态Bayesian网络的叶片加工质量监控与溯源

doi:CNKI:11-1929/V.20111107.1019.001

材料工程与机械制造

本期目录 | 过刊浏览 | 高级检索

前一篇 | 后一篇

基于动态Bayesian网络的叶片加工质量监控与溯源

王佩, 张定华, 陈冰, 李山, 王明微

西北工业大学现代设计与集成制造技术教育部重点实验室, 陕西西安 710072

收稿日期:2011-05-06 修回日期:2010-08-22 出版日期:2012-01-25 发布日期:2012-01-16
通讯作者: 张定华 E-mail:dhzhang@nwpu.edu.cn
作者简介:王佩女,博士研究生.主要研究方向: CAD/CAM技术,集成制造技术,质量工程,制造业信息化技术. Tel: 029-88493232-415 E-mail: abinghoney@163.com
张定华男,博士,教授,博士生导师.主要研究方向: CAD/CAM技术,集成制造技术,计算机图形图像. Tel: 029-88493009 E-mail: dhzhang@nwpu.edu.cn
基金资助:
国家自然科学基金(70931004)

Machining Quality Monitoring of Blades and Source Tracing Based on Dynamic Bayesian Network

WANG Pei, ZHANG Dinghua, CHEN Bing, LI Shan, WANG Mingwei

Key Laboratory of Contemporary Design and Integrated Manufacturing Technology, Ministry of Education, Northwestern Polytechnical University, Xi'an 710072, China

Received:2011-05-06 Revised:2010-08-22 Online:2012-01-25 Published:2012-01-16

摘要/Abstract

摘要： 针对叶片加工过程中质量精度不高的问题,提出了基于动态Bayesian网络的叶片加工质量监控与溯源方法.利用动态Bayesian网络建立起叶片加工工序间的相互联系,实现对整个加工过程的控制.基于Bayesian网络对影响加工工序的因素集建立因果联系,采用多元统计过程控制中的T²控制图完成对各工序影响因素集的监控.进行误差溯源时,根据Bayesian网络建立的因果关系对失控样本的T²统计量依据原因变量进行误差分解,并构建各分解变量的控制限,将其作为误差源判定的条件.通过对某叶片加工过程的仿真,验证了所提方法的有效性.

关键词: 航空发动机, 叶片加工, 质量监控, 误差溯源, 动态Bayesian网络, 误差分解

Abstract: A methodology of monitoring the machining quality of blades and tracing the error source based on dynamic Bayesian network is proposed for solving the low accuracy of blade machining quality. Dynamic Bayesian network is used to establish the relationship between blade machining operations to realize the control of the whole machining process. The causal relation between the elements in the main process factor set that affects blade machining operations is built by Bayesian network. The control chart T² is used to monitor the factor set of each operation to judge whether the operation is out of control or not. While tracing error sources, the T² statistics of the samples out of control are decomposed according to causal variables described by aforementioned causal relation, and the decomposed variable control limits are built as error source judgment conditions are built. A simulation study on a blade machining process is carried out, which demonstrates that the proposed method is reasonable.

Key words: aeroengine, blade machining, quality monitoring, error source tracing, dynamic Bayesian network, error decomposition

中图分类号:

王佩, 张定华, 陈冰, 李山, 王明微. 基于动态Bayesian网络的叶片加工质量监控与溯源[J]. 航空学报, 2012, 33(1): 170-181.

WANG Pei, ZHANG Dinghua, CHEN Bing, LI Shan, WANG Mingwei. Machining Quality Monitoring of Blades and Source Tracing Based on Dynamic Bayesian Network[J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2012, 33(1): 170-181.

参考文献

[1] Chiang L H, Russell E L, Braatz R D. Fault detection and diagnosis in industrial systems. New York:Springer-Verlag, 2001.

[2] Venkatasubramanian V, Rengaswamy R, Yin K, et al. A review of process fault detection and diagnosis part I: quantitative model-based methods. Computers and Chemical Engineering, 2003, 27(3): 293-311.

[3] Chen W D, Miao R, Zhao Y Z, et al. Multivariate statistical process diagnosis based on path diagram. Journal of Shanghai Jiaotong University, 2010, 44(12): 1758-1762. (in Chinese) 陈文多, 苗瑞, 赵言正, 等. 基于路径图的多元统计过程诊断. 上海交通大学学报, 2010, 44(12): 1758-1762.

[4] Chan F T. Application of a hybrid case-based reasoning approach in electroplating industry. Expert Systems with Applications, 2005, 29(1): 121-130.

[5] Patton R J, Frank P M, Clark R N. Issues of fault diagnosis for dynamic systems. New York: Springer, 2000.

[6] Du S C, Xi L F, Pan E S. Modeling & controlling of product quality in serial-parallel hybrid multi-stage manufacturing systems. Computer Integrated Manufacturing Systems, 2006, 12(7): 1068-1073. (in Chinese) 杜世昌, 奚立峰, 潘尔顺. 串并联混合式多阶段制造系统产品质量建模与控制. 计算机集成制造系统, 2006, 12(7): 1068-1073.

[7] Liu D Y, Jiang P Y. Fluctuation analysis of process flow based on error propagation network. Chinese Journal of Mechanical Engineering, 2010, 46(2): 14-21. (in Chinese) 刘道玉, 江平宇, 基于误差传递网络的工序流波动分析. 机械工程学报, 2010, 46(2): 14-21.

[8] Jin M, Tsung F. A chart allocation strategy for multistage processes. IIE Transactions, 2008, 41(9): 790-803.

[9] Li Y, Tsung F. False discovery rate-adjusted charting schemes for multistage process fault diagnosis and isolation. Technometrics, 2008, 51(2): 186-205.

[10] Du F Z, Tang X Q, Sun J. ARL computation and parameters optimization for MEWMA control chart based on the Markov chain. Journal of Beijing University of Aeronautics and Astronautics, 2006, 32(8): 974-978. (in Chinese) 杜福洲, 唐晓青, 孙静. MEWMA控制图 ARL计算及参数优化. 北京航空航天大学学报, 2006, 32 (8): 974-978.

[11] Du F Z, Sun J, Tang X Q. Run length analysis for multivariate cumulative sum control chart based on Markov chains. Journal of Tsinghua University: Science and Technology, 2007, 47(2): 169-172. (in Chinese) 杜福洲, 孙静, 唐晓青. 基于Markov 链的MCUSUM控制图链长分析. 清华大学学报:自然科学版, 2007, 47(2): 169-172.

[12] Xiang L, Tsung F. Statistical monitoring of multistage processes based on engineering models. IIE Transactions, 2008, 40(10): 957-970.

[13] Zantek P F, Li S, Chen Y. Detecting multiple special causes from multivariate data with applications to fault detection in manufacturing. IIE Transactions, 2007, 39(8): 771-782.

[14] Kamal H, Meisam P, Hosein M. Fault diagnosis and classification based on wavelet transform and neural network. Progress in Nuclear Energy, 2011, 53(1): 41-47.

[15] Doganaksoy N, Faltin F W. Tucker W T. Identification of out of control multivariate characteristic in a multivariable manufacturing environment. Communications in Statistics, 1991, 20(9): 2775-2790.

[16] Cui X, Guo W, Lin L, et al. Covariate-adjusted nonlinear regression. Annals of Statistics, 2009, 37(4): 1839-1870.

[17] Senturk D. Covariate-adjusted varying coefficient models. Biostatistics, 2006, 7(2): 235-251.

[18] Maravelakis P E, Bersimis S, Panaretos J, et al. Identifying the out of control variable in a multivariate control chart. Journal of Quality Technology, 2002, 31(12): 2391-2408.

[19] Aparisi F, Avendano G, Sanz J. Techniques to interpret T² control chart signals. IIE Transactions, 2006, 38(8): 647-657.

[20] Sun H C, Yan Z Y, Xie L Y. Recognition based on wavelet neural network for sucker rod's defects. Journal of Northeastern University: Natural Science, 2008, 29(2): 258-261. (in Chinese) 孙红春,阎志颖,谢里阳. 基于小波神经网络的抽油杆缺陷识别. 东北大学学报:自然科学版, 2008, 29(2): 258-261.

[21] Nie S C, Tang X Q. Research on quality fault diagnosis in mechanical machining process based on genetic algorithm. Acta Aeronautica et Astronautica Sinica, 2001, 22(6): 521-524. (in Chinese) 聂胜才, 唐晓青. 基于基因算法的加工质量故障诊断研究与实现. 航空学报, 2001, 22(6): 521-524.

[22] Niaki S T A, Abbasi B. Fault diagnosis in multivariate control chart using artificial neural networks. Quality Reliability Engineering International, 2005, 21(8): 825-840.

[23] Zeng L, Zhou S. Variability monitoring of multistage manufacturing processes using regression adjustment methods. IIE Transactions, 2008, 40(2): 109-121.

[24] Bersimis S, Psarakis S, Panaretos J. Multivariate statistical process control charts: an overview. Quality Reliability Engineering International, 2007, 23(5): 517-543.

[25] Mason R L, Tracy N D, Young J C. Decomposition of T² for multivariate control chart interpretation. Journal of Quality Technology, 1995, 27(2): 109-119.

[26] Li J, Jin J, Shi J. Causation-based T² decomposition for multivariate process monitoring and diagnosis. Journal of Quality Technology, 2008, 40(1): 46-58.

E-mail：hkxb@buaa.edu.cn

关于我们

期刊社服务

专业学科

封面文章

友情链接

主管单位：中国科学技术协会主办单位：中国航空学会北京航空航天大学

基于动态Bayesian网络的叶片加工质量监控与溯源

Machining Quality Monitoring of Blades and Source Tracing Based on Dynamic Bayesian Network

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价

[1]	尹泽勇, 李概奇, 石建成, 银越千. 先进通用核心机派生发展的理念、方法及实践[J]. 航空学报, 2024, 45(7): 29713-029713.
[2]	黄维娜, 黎方娟, 祁宏斌. 航空发动机数字工程初步研究与发展思考[J]. 航空学报, 2024, 45(5): 529693-529693.
[3]	齐国宁, 吴宝海, 符江锋. 高速高压燃油齿轮泵典型卸荷槽对比分析[J]. 航空学报, 2024, 45(5): 529666-529666.
[4]	胡明辉, 高金吉, 江志农, 王维民, 邹利民, 周涛, 凡云峰, 王越, 冯家欣, 李晨阳. 航空发动机振动监测与故障诊断技术研究进展[J]. 航空学报, 2024, 45(4): 630194-630194.
[5]	陈立芳, 孙亚冰, 周书华, 高强, 乔保栋, 李栋. 基于真实数据反演的风扇转子本机平衡方法[J]. 航空学报, 2024, 45(4): 628321-628321.
[6]	马瑞贤, 王鑫, 王开明, 李斌, 廖明夫, 王四季. 航空发动机篦齿⁃橡胶涂层机匣碰摩实验[J]. 航空学报, 2024, 45(4): 628350-628350.
[7]	肖袁, 冯坤, 胡明辉, 江志农. 航空发动机转子非稳态振动分量提取方法[J]. 航空学报, 2024, 45(3): 228158-228158.
[8]	张超, 曹勇, 赵振强, 张海洋, 孙建波, 王志华, 蔚夺魁. 树脂基复合材料在民用航空发动机中的应用与关键技术研究进展[J]. 航空学报, 2024, 45(2): 28556-028556.
[9]	胡应交, 徐峰, 杨志军. 航空发动机整机防结冰试验能力综述[J]. 航空学报, 2023, 44(S2): 729449-729449.
[10]	郑新前, 王钧莹, 黄维娜, 伏宇, 程荣辉, 熊洪洋. 航空发动机不确定性设计体系探讨[J]. 航空学报, 2023, 44(7): 27099-027099.
[11]	万能, 庄其鑫, 郭彦亨, 常智勇, 王道. 拟合精度约束下航发叶片在机测量采样策略[J]. 航空学报, 2023, 44(7): 427151-427151.
[12]	李智豪, 张彪, 李健, 许传龙, 宋兆龙. 预混旋流燃烧火焰三维折射率场重建[J]. 航空学报, 2023, 44(4): 126480-126480.
[13]	张健, 张敏, 杜娟, 黄伟亮, 聂超群. 自适应康达喷气控制在高负荷压气机中的试验研究[J]. 航空学报, 2023, 44(22): 128883-128883.
[14]	赵淼东, 胡殿印, 毛建兴, 孙海鹤, 秦仕勇, 古远兴, 王荣桥, 田腾跃, 鄢林, 肖值兴. 轮盘低周疲劳模拟件设计及试验[J]. 航空学报, 2023, 44(18): 228320-228320.
[15]	杭杰, 李运华, 杨丽曼. 航空发动机加力燃烧燃油控制系统主动容错控制[J]. 航空学报, 2023, 44(14): 328063-328063.