激光选区熔化增材制造缺陷智能监测与过程控制综述

doi:10.7527/S1000-6893.2020.24790

综述

本期目录 | 过刊浏览 | 高级检索

前一篇 | 后一篇

激光选区熔化增材制造缺陷智能监测与过程控制综述

曹龙超^1,2, 周奇¹, 韩远飞³, 宋波², 聂振国⁴, 熊异⁵, 夏凉⁶

1. 华中科技大学航空航天学院, 武汉 430074;
2. 华中科技大学材料科学与工程学院材料成形与模具技术国家重点实验室, 武汉 430074;
3. 上海交通大学材料科学与工程学院金属基复合材料国家重点实验室, 上海 200240;
4. 清华大学机械工程系, 北京 100084;
5. 南方科技大学系统设计与智能制造学院, 深圳 518005;
6. 华中科技大学机械科学与工程学院数字制造装备与技术国家重点实验, 武汉 430074

收稿日期:2020-09-23 修回日期:2020-11-07 发布日期:2020-12-08
通讯作者: 周奇 E-mail:qizhou@hust.edu.cn
基金资助:
国家自然科学基金（51805179）；中国博士后基金（2020M682397，2020M682396）

Review on intelligent monitoring of defects and process control of selective laser melting additive manufacturing

CAO Longchao^1,2, ZHOU Qi¹, HAN Yuanfei³, SONG Bo², NIE Zhenguo⁴, XIONG Yi⁵, XIA Liang⁶

1. School of Aerospace Engineering, Huazhong University of Science & Technology, Wuhan 430074, China;
2. State Key Laboratory of Materials Processing and Die and Mould Technology, School of Materials Science and Engineering, Huazhong University of Science & Technology, Wuhan 430074, China;
3. State Key Laboratory of Metal Matrix Composites, School of Mechanical Science and Engineering, Shanghai Jiaotong University, Shanghai 200240, China;
4. Department of Mechanical Engineering, Tsinghua University, Beijing 100084, China;
5. School of System Design and Intelligent Manufacturing, Southern University of Science and Technology, Shenzhen 518005, China;
6. State Key Laboratory of Digital Manufacturing Equipment and Technology, School of Mechanical Science and Engineering, Huazhong University of Science and Technology, Wuhan 430074, China

Received:2020-09-23 Revised:2020-11-07 Published:2020-12-08
Supported by:
National Natural Science Foundation of China (51805179); China Postdoctoral Science Foundation (2020M682397, 2020M682396)

摘要/Abstract

摘要： 激光选区熔化（SLM）技术被认为是最有应用前景的增材制造技术之一，已应用于航空航天、医疗器械等领域。然而，如何确保构件质量的可靠性和制造的可重复性是SLM面临的最大挑战，已被认为是限制SLM及其他金属增材制造技术发展和工业应用的最大壁垒。其中，主要原因是SLM过程中会产生难以控制的缺陷。因此，对SLM进行过程监测和实时反馈控制是解决这一挑战的重要研究方向，也已成为学术界和工业界的研究热点之一。通过对近十年该领域的文献调研，综述了金属激光增材制造中常见的冶金缺陷及其产生机理，对金属增材制造过程产生的信号及其监测手段，如声信号、光信号及热信号等进行了详细描述；总结了信号数据的处理方法，包括传统的统计处理方法和新兴的基于机器学习的智能监测方法；随后，综述了金属增材制造过程的质量控制方法，包括非闭环控制和闭环控制，并对全文进行了总结，展望了未来SLM智能监测和控制领域值得深入的研究方向。

关键词: 激光选区熔化(SLM), 增材制造, 过程监测, 机器学习, 质量控制

Abstract: Selective Laser Melting (SLM) is considered to be one of the most promising additive manufacturing technologies and has been applied in aerospace, medical equipment and other fields. However, how to ensure the reliability of component quality and the repeatability of manufacturing is the largest challenge faced by SLM, which has been regarded as the biggest barrier to the development and industrial application of SLM and other metal additive manufacturing technologies. The main reason is that the defects generated during the SLM process are difficult to control. Therefore, process monitoring and real-time feedback control of SLM is an important research direction to solve this problem, which has become one of the research hotspots in academia and industry. Based on a literature survey in this field in the past ten years, the common metallurgical defects and their generation mechanisms in metal laser additive manufacturing are reviewed, and the signals generated during the metal additive manufacturing process and their monitoring methods, such as acoustic signal, optical signal, and thermal Signal, are described in detail. Signal data processing methods are summarized, including traditional statistical processing methods and emerging intelligent monitoring methods based on machine learning. Then, the quality control methods of metal additive manufacturing processes, including non-closed loop control and closed-loop control, are reviewed. Directions worthy of future research of SLM intelligent monitoring and control are also discussed.

Key words: Selective Laser Melting(SLM), additive manufacturing, process monitoring, machine learning, quality control

中图分类号:

V261.8
TG665

曹龙超, 周奇, 韩远飞, 宋波, 聂振国, 熊异, 夏凉. 激光选区熔化增材制造缺陷智能监测与过程控制综述[J]. 航空学报, 2021, 42(10): 524790-524790.

CAO Longchao, ZHOU Qi, HAN Yuanfei, SONG Bo, NIE Zhenguo, XIONG Yi, XIA Liang. Review on intelligent monitoring of defects and process control of selective laser melting additive manufacturing[J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2021, 42(10): 524790-524790.

参考文献

[1] HE W, SHI W X, LI J Q, et al. In-situ monitoring and deformation characterization by optical techniques; part I:Laser-aided direct metal deposition for additive manufacturing[J]. Optics and Lasers in Engineering, 2019, 122:74-88.
[2] 赵德陈, 林峰. 金属粉末床熔融工艺在线监测技术综述[J]. 中国机械工程, 2018, 29(17):2100-2110, 2118. ZHAO D C, LIN F. A review of on-line monitoring techniques in metal powder bed fusion processes[J]. China Mechanical Engineering, 2018, 29(17):2100-2110, 2118(in Chinese).
[3] TAPIA G, ELWANY A. A review on process monitoring and control in metal-based additive manufacturing[J]. Journal of Manufacturing Science and Engineering, 2014, 136(6):060801.
[4] EVERTON S K, HIRSCH M, STRAVROULAKIS P, et al. Review of in situ process monitoring and in situ metrology for metal additive manufacturing[J]. Materials & Design, 2016, 95:431-445.
[5] SPEARS T G, GOLD S A. In-process sensing in selective laser melting (SLM) additive manufacturing[J]. Integrating Materials and Manufacturing Innovation, 2016, 5(1):16-40.
[6] GRASSO M, COLOSIMO B M. Process defects andin situmonitoring methods in metal powder bed fusion:A review[J]. Measurement Science and Technology, 2017, 28(4):044005.
[7] KIM H, LIN Y R, TSENG T L B. A review on quality control in additive manufacturing[J]. Rapid Prototyping Journal, 2018, 24(3):645-669.
[8] KYOGOKU H, IKESHOJI T T. A review of metal additive manufacturing technologies:Mechanism of defects formation and simulation of melting and solidification phenomena in laser powder bed fusion process[J]. Mechanical Engineering Reviews, 2020, 7(1):19-182.
[9] 吴世彪, 窦文豪, 杨永强, 等. 面向激光选区熔化金属增材制造的检测技术研究进展[J]. 精密成形工程, 2019, 11(4):37-50. WU S B, DOU W H, YANG Y Q, et al. Research progress of inspection technology for addition manufacturing of SLM metal[J]. Journal of Netshape Forming Engineering, 2019, 11(4):37-50(in Chinese).
[10] YAP C Y, CHUA C K, DONG Z L, et al. Review of selective laser melting:Materials and applications[J]. Applied Physics Reviews, 2015, 2(4):041101.
[11] 魏青松, 宋波, 文世峰. 金属粉床激光增材制造技术[M]. 北京:化学工业出版社, 2019:2-25. WEI Q S, SONG B, WEN S F. Meatl powder bed laser additive manufacturing technology[M]. Beijing:Chemical Industry Press, 2019:2-25(in Chinese).
[12] 王华明. 高性能大型金属构件激光增材制造:若干材料基础问题[J]. 航空学报, 2014, 35(10):2690-2698. WANG H M. Materials' fundamental issues of laser additive manufacturing for high-performance large metallic components[J]. Acta Aeronautica et Astronautica Sinica, 2014, 35(10):2690-2698(in Chinese).
[13] HOOPER P A. Melt pool temperature and cooling rates in laser powder bed fusion[J]. Additive Manufacturing, 2018, 22:548-559.
[14] GUO M, GU D D, XI L X, et al. Selective laser melting additive manufacturing of pure tungsten:Role of volumetric energy density on densification, microstructure and mechanical properties[J]. International Journal of Refractory Metals and Hard Materials, 2019, 84:105025.
[15] MATTHEWS M J, GUSS G, KHAIRALLAH S A, et al. Denudation of metal powder layers in laser powder bed fusion processes[J]. Acta Materialia, 2016, 114:33-42.
[16] KHAIRALLAH S A, ANDERSON A T, RUBENCHIK A, et al. Laser powder-bed fusion additive manufacturing:Physics of complex melt flow and formation mechanisms of pores, spatter, and denudation zones[J]. Acta Materialia, 2016, 108:36-45.
[17] ZHANG B, ZIEGERT J, FARAHI F, et al. In-situ surface topography of laser powder bed fusion using fringe projection[J]. Additive Manufacturing, 2016, 12:100-107.
[18] CHEN H, WEI Q S, ZHANG Y J, et al. Powder-spreading mechanisms in powder-bed-based additive manufacturing:Experiments and computational modeling[J]. Acta Materialia, 2019, 179:158-171.
[19] BARTLETT J L, JARAMA A, JONES J, et al. Prediction of microstructural defects in additive manufacturing from powder bed quality using digital image correlation[J]. Materials Science and Engineering:A, 2020, 794:140002.
[20] CRIALES L E, ARISOY Y M, LANE B, et al. Laser powder bed fusion of nickel alloy 625:Experimental investigations of effects of process parameters on melt pool size and shape with spatter analysis[J]. International Journal of Machine Tools and Manufacture, 2017, 121:22-36.
[21] GUNENTHIRAM V, PEYRE P, SCHNEIDER M, et al. Analysis of laser-melt pool-powder bed interaction during the selective laser melting of a stainless steel[J]. Journal of Laser Applications, 2017, 29(2):022303.
[22] GUNENTHIRAM V, PEYRE P, SCHNEIDER M, et al. Experimental analysis of spatter generation and melt-pool behavior during the powder bed laser beam melting process[J]. Journal of Materials Processing Technology, 2018, 251:376-386.
[23] ZHANG Y J, HONG G S, YE D S, et al. Extraction and evaluation of melt pool, plume and spatter information for powder-bed fusion AM process monitoring[J]. Materials & Design, 2018, 156:458-469.
[24] ZHANG Y J, FUH J Y H, YE D S, et al. In-situ monitoring of laser-based PBF via off-axis vision and image processing approaches[J]. Additive Manufacturing, 2019, 25:263-274.
[25] KHAIRALLAH S A, MARTIN A A, LEE J R I, et al. Controlling interdependent meso-nanosecond dynamics and defect generation in metal 3D printing[J]. Science, 2020, 368(6491):660-665.
[26] LIU Y, YANG Y Q, MAI S Z, et al. Investigation into spatter behavior during selective laser melting of AISI 316L stainless steel powder[J]. Materials & Design, 2015, 87:797-806.
[27] WANG D, WU S B, FU F, et al. Mechanisms and characteristics of spatter generation in SLM processing and its effect on the properties[J]. Materials & Design, 2017, 117:121-130.
[28] YOUNG Z A, GUO Q L, PARAB N D, et al. Types of spatter and their features and formation mechanisms in laser powder bed fusion additive manufacturing process[J]. Additive Manufacturing, 2020, 36:101438.
[29] SOW M C, DE TERRIS T, CASTELNAU O, et al. Influence of beam diameter on Laser Powder Bed Fusion (L-PBF) process[J]. Additive Manufacturing, 2020, 36:101532.
[30] YE D S, HONG G S, ZHANG Y J, et al. Defect detection in selective laser melting technology by acoustic signals with deep belief networks[J]. The International Journal of Advanced Manufacturing Technology, 2018, 96(5-8):2791-2801.
[31] ALKAHARI M R, FURUMOTO T, UEDA T, et al. Consolidation characteristics of ferrous-based metal powder in additive manufacturing[J]. Journal of Advanced Mechanical Design, Systems, and Manufacturing, 2014, 8(1):0009.
[32] YAN W T, GE W J, QIAN Y, et al. Multi-physics modeling of single/multiple-track defect mechanisms in electron beam selective melting[J]. Acta Materialia, 2017, 134:324-333.
[33] 冯一琦, 谢国印, 张璧, 等. 激光功率与底面状态对选区激光熔化球化的影响[J]. 航空学报, 2019, 40(12):423089. FENG Y Q, XIE G Y, ZHANG B, et al. Influence of laser power and surface condition on balling behavior in selective laser melting[J]. Acta Aeronautica et Astronautica Sinica, 2019, 40(12):423089(in Chinese).
[34] SCIME L, BEUTH J. Using machine learning to identify in-situ melt pool signatures indicative of flaw formation in a laser powder bed fusion additive manufacturing process[J]. Additive Manufacturing, 2019, 25:151-165.
[35] QIU C L, PANWISAWAS C, WARD M, et al. On the role of melt flow into the surface structure and porosity development during selective laser melting[J]. Acta Materialia, 2015, 96:72-79.
[36] BAUEREIß A, SCHAROWSKY T, KÖRNER C. Defect generation and propagation mechanism during additive manufacturing by selective beam melting[J]. Journal of Materials Processing Technology, 2014, 214(11):2522-2528.
[37] KING W E, BARTH H D, CASTILLO V M, et al. Observation of keyhole-mode laser melting in laser powder-bed fusion additive manufacturing[J]. Journal of Materials Processing Technology, 2014, 214(12):2915-2925.
[38] GONG H J, RAFI K, GU H F, et al. Analysis of defect generation in Ti-6Al-4V parts made using powder bed fusion additive manufacturing processes[J]. Additive Manufacturing, 2014, 1-4:87-98.
[39] KAMATH C, EL-DASHER B, GALLEGOS G F, et al. Density of additively-manufactured, 316L SS parts using laser powder-bed fusion at Powers up to 400 W[J]. The International Journal of Advanced Manufacturing Technology, 2014, 74(1-4):65-78.
[40] LEUNG C L A, MARUSSI S, ATWOOD R C, et al. In-situ X-ray imaging of defect and molten pool dynamics in laser additive manufacturing[J]. Nature Communications, 2018, 9:1355.
[41] PANWISAWAS C, QIU C L, SOVANI Y, et al. On the role of thermal fluid dynamics into the evolution of porosity during selective laser melting[J]. Scripta Materialia, 2015, 105:14-17.
[42] COECK S, BISHT M, PLAS J, et al. Prediction of lack of fusion porosity in selective laser melting based on melt pool monitoring data[J]. Additive Manufacturing, 2019, 25:347-356.
[43] de TERRIS T, ANDREAU O, PEYRE P, et al. Optimization and comparison of porosity rate measurement methods of Selective Laser Melted metallic parts[J]. Additive Manufacturing, 2019, 28:802-813.
[44] HOJJATZADEH S M H, PARAB N D, YAN W T, et al. Pore elimination mechanisms during 3D printing of metals[J]. Nature Communications, 2019, 10:3088.
[45] MARTIN A A, CALTA N P, KHAIRALLAH S A, et al. Dynamics of pore formation during laser powder bed fusion additive manufacturing[J]. Nature Communications, 2019, 10:1987.
[46] SANAEI N, FATEMI A, PHAN N. Defect characteristics and analysis of their variability in metal L-PBF additive manufacturing[J]. Materials & Design, 2019, 182:108091.
[47] HOJJATZADEH S M H, PARAB N D, GUO Q L, et al. Direct observation of pore formation mechanisms during LPBF additive manufacturing process and high energy density laser welding[J]. International Journal of Machine Tools and Manufacture, 2020, 153:103555.
[48] NING J Q, SIEVERS D E, GARMESTANI H, et al. Analytical modeling of part porosity in metal additive manufacturing[J]. International Journal of Mechanical Sciences, 2020, 172:105428.
[49] ZHAO M H, DUAN C H, LUO X P. Metallurgical defect behavior, microstructure evolution, and underlying thermal mechanisms of metallic parts fabricated by selective laser melting additive manufacturing[J]. Journal of Laser Applications, 2020, 32(2):22012.
[50] ABD-ELGHANY K, BOURELL D L. Property evaluation of 304L stainless steel fabricated by selective laser melting[J]. Rapid Prototyping Journal, 2012, 18(5):420-428.
[51] STRANO G, HAO L, EVERSON R M, et al. Surface roughness analysis, modelling and prediction in selective laser melting[J]. Journal of Materials Processing Technology, 2013, 213(4):589-597.
[52] JAMSHIDINIA M, KOVACEVIC R. The influence of heat accumulation on the surface roughness in powder-bed additive manufacturing[J]. Surface Topography:Metrology and Properties, 2015, 3(1):014003.
[53] KLESZCZYNSKI S, LADEWIG A, FRIEDBERGER K, et al. Position dependency of surface roughness in parts from laser beam melting systems[C]//26th International Solid Free Form Fabrication (SFF) Symposium, 2015:360-370.
[54] FOX J C, MOYLAN S P, LANE B M. Effect of process parameters on the surface roughness of overhanging structures in laser powder bed fusion additive manufacturing[J]. Procedia CIRP, 2016, 45:131-134.
[55] FOX J C, MOYLAN S P,LANE B M. Preliminary study toward surface texture as a process signature in laser powder bed fusion additive manufacturing[C]//2016 Summer Topical Meeting:Dimensional Accuracy and Surface Finish in Additive Manufacturing, 2016.
[56] HO Y, BRANDON M L, JASON C F, et al. Continuous laser scan strategy for faster build speeds in laser powder bed fusion system[C]//The 28th Annual International Solid Freeform Fabrication Symposium, 2017.
[57] MA C P, GUAN Y C, ZHOU W. Laser polishing of additive manufactured Ti alloys[J]. Optics and Lasers in Engineering, 2017, 93:171-177.
[58] CAIAZZO F, ALFIERI V, ALIBERTI M V, et al. Influence of building parameters on surface aspect and roughness in additive manufactured metal parts[J]. Key Engineering Materials, 2019, 813:104-109.
[59] YEUNG H, LANE B, FOX J. Part geometry and conduction-based laser power control for powder bed fusion additive manufacturing[J]. Additive Manufacturing, 2019, 30:100844.
[60] AKHIL V, RAGHAV G, ARUNACHALAM N, et al. Image data-based surface texture characterization and prediction using machine learning approaches for additive manufacturing[J]. Journal of Computing and Information Science in Engineering, 2020, 20(2):021010.
[61] TIAN Y, TOMUS D, ROMETSCH P, et al. Influences of processing parameters on surface roughness of Hastelloy X produced by selective laser melting[J]. Additive Manufacturing, 2017, 13:103-112.
[62] GAJA H, LIOU F. Defects monitoring of laser metal deposition using acoustic emission sensor[J]. The International Journal of Advanced Manufacturing Technology, 2017, 90(1-4):561-574.
[63] HIRSCH M, CATCHPOLE-SMITH S, PATEL R, et al. Meso-scale defect evaluation of selective laser melting using spatially resolved acoustic spectroscopy[J]. Proceedings Mathematical, Physical, and Engineering Sciences, 2017, 473(2205):20170194.
[64] BARUA S, LIOU F, NEWKIRK J, et al. Vision-based defect detection in laser metal deposition process[J]. Rapid Prototyping Journal, 2014, 20(1):77-85.
[65] PFLEGER M, ARAMENDI B, et al. Online cracking detection by means of optical techniques in laser-cladding process[J]. Structural Control and Health Monitoring, 2019, 26(3):e2291.
[66] GUO C, LI S, SHI S, et al. Effect of processing parameters on surface roughness, porosity and cracking of as-built IN738LC parts fabricated by laser powder bed fusion[J]. Journal of Materials Processing Technology, 2020, 285:116788.
[67] LEE Y S, KIRKA M M, FERGUSON J, et al. Correlations of cracking with scan strategy and build geometry in electron beam powder bed additive manufacturing[J]. Additive Manufacturing, 2020, 32:101031.
[68] OPPRECHT M, GARANDET J P, ROUX G, et al. A solution to the hot cracking problem for aluminium alloys manufactured by laser beam melting[J]. Acta Materialia, 2020, 197:40-53.
[69] COLOSIMO B M, GRASSO M. Spatially weighted PCA for monitoring video image data with application to additive manufacturing[J]. Journal of Quality Technology, 2018, 50(4):391-417.
[70] DOUELLOU C, BALANDRAUD X, DUC E. Assessment of geometrical defects caused by thermal distortions in laser-beam-melting additive manufacturing:A simulation approach[J]. Rapid Prototyping Journal, 2019, 25(5):939-950.
[71] REN K, CHEW Y, FUH J Y H, et al. Thermo-mechanical analyses for optimized path planning in laser aided additive manufacturing processes[J]. Materials & Design, 2019, 162:80-93.
[72] LI L, ANAND S. Hatch pattern based inherent strain prediction using neural networks for powder bed fusion additive manufacturing[J]. Journal of Manufacturing Processes, 2020, 56:1344-1352.
[73] 张凯, 刘婷婷, 张长东, 等. 基于熔池数据分析的激光选区熔化成形件翘曲变形行为研究[J]. 中国激光, 2015, 42(9):0903007. ZHANG K, LIU T T, ZHANG C D, et al. Study on deformation behavior in selective laser melting based on the analysis of the melt pool data[J]. Chinese Journal of Lasers, 2015, 42(9):0903007(in Chinese).
[74] NANDWANA P, PLOTKOWSKI A, KANNAN R, et al. Predicting geometric influences in metal additive manufacturing[J]. Materials Today Communications, 2020, 25:101174.
[75] SUFIIAROV V, SOKOLOVA V, BORISOV E, et al. Investigation of accuracy, microstructure and properties of additive manufactured lattice structures[J]. Materials Today:Proceedings, 2020, 30:572-577.
[76] KOESTER L W, TAHERI H, BIGELOW T A, et al. In-situ acoustic signature monitoring in additive manufacturing processes[C]//AIP Conference Proceedings, 2018.
[77] LÖR L, SCHIMANSKY F P, KVN U, et al. Selective laser melting of a beta-solidifying TNM-B1 titanium aluminide alloy[J]. Journal of Materials Processing Technology, 2014, 214(9):1852-1860.
[78] FATEMI A, MOLAEI R, SHARIFIMEHR S, et al. Multiaxial fatigue behavior of wrought and additive manufactured Ti-6Al-4V including surface finish effect[J]. International Journal of Fatigue, 2017, 100:347-366.
[79] ZHANG B, LIU S Y, SHIN Y C. In-Process monitoring of porosity during laser additive manufacturing process[J]. Additive Manufacturing, 2019, 28:497-505.
[80] XIONG Y L, YAO S, ZHAO Z L, et al. A new approach to eliminating enclosed voids in topology optimization for additive manufacturing[J]. Additive Manufacturing, 2020, 32:101006.
[81] YÁNEZ A, FIORUCCI M P, CUADRADO A, et al. Surface roughness effects on the fatigue behaviour of gyroid cellular structures obtained by additive manufacturing[J]. International Journal of Fatigue, 2020, 138:105702.
[82] KOU S. Solidification and liquation cracking issues in welding[J]. JOM, 2003, 55(6):37-42.
[83] VRANCKEN B, GANERIWALA R K, MATTHEWS M J. Analysis of laser-induced microcracking in tungsten under additive manufacturing conditions:Experiment and simulation[J]. Acta Materialia, 2020, 194:464-472.
[84] 杨益, 党明珠, 李伟, 等. 激光选区熔化钛铝合金裂纹形成机理及抑制研究[J]. 机械工程学报, 2020, 56(3):181-188. YANG Y, DANG M Z, LI W, et al. Study on cracking mechanism and inhibiting process of TiAl alloys fabricated by selective laser melting[J]. Journal of Mechanical Engineering, 2020, 56(3):181-188(in Chinese).
[85] GRASSO M, LAGUZZA V, SEMERARO Q, et al. In-process monitoring of selective laser melting:Spatial detection of defects via image data analysis[J]. Journal of Manufacturing Science and Engineering, 2017, 139(5):051001.
[86] GRUBER S, GRUNERT C, RIEDE M, et al. Comparison of dimensional accuracy and tolerances of powder bed based and nozzle based additive manufacturing processes[J]. Journal of Laser Applications, 2020, 32(3):032016.
[87] XIE R S, SHI Q Y, CHEN G Q. Improved distortion prediction in additive manufacturing using an experimental-based stress relaxation model[J]. Journal of Materials Science & Technology, 2020, 59:83-91.
[88] RUPAL B S, ANWER N, SECANELL M, et al. Geometric tolerance and manufacturing assemblability estimation of metal additive manufacturing (AM) processes[J]. Materials & Design, 2020, 194:108842.
[89] AVERARDI A, COLA C, ZELTMANN S E, et al. Effect of particle size distribution on the packing of powder beds:A critical discussion relevant to additive manufacturing[J]. Materials Today Communications, 2020, 24:100964.
[90] GRASSO M, VALSECCHI G, COLOSIMO B M. Powder bed irregularity and hot-spot detection in electron beam melting by means of in-situ video imaging[J]. Manufacturing Letters, 2020, 24:47-51.
[91] PLOTNIKOV Y, HENKEL D, BURDICK J, et al. Infrared-assisted acoustic emission process monitoring for additive manufacturing[C]//AIP Conference Proceedings, 2019.
[92] KOESTER L W, TAHERI H, BOND L J, et al. Acoustic monitoring of additive manufacturing for damage and process condition determination[C]//AIP Conference Proceedings, 2019.
[93] SHEVCHIK S A, KENEL C, LEINENBACH C, et al. Acoustic emission for in-situ quality monitoring in additive manufacturing using spectral convolutional neural networks[J]. Additive Manufacturing, 2018, 21:598-604.
[94] WASMER K, LE-QUANG T, MEYLAN B, et al. In situ quality monitoring in AM using acoustic emission:A reinforcement learning approach[J]. Journal of Materials Engineering and Performance, 2019, 28(2):666-672.
[95] WILLIAMS J, DRYBURGH P, CLARE A, et al. Defect detection and monitoring in metal additive manufactured parts through deep learning of spatially resolved acoustic spectroscopy signals[J]. Smart and Sustainable Manufacturing Systems, 2018, 2(1):20180035.
[96] KOUPRIANOFF D, LUWES N, NEWBY E, et al. On-line monitoring of laser powder bed fusion by acoustic emission:Acoustic emission for inspection of single tracks under different powder layer thickness[C]//2017 Pattern Recognition Association of South Africa and Robotics and Mechatronics (PRASA-RobMech). Piscataway:IEEE Press, 2017:203-207.
[97] MATILAINEN V P, PIILI H, SALMINEN A, et al. Preliminary investigation of keyhole phenomena during single layer fabrication in laser additive manufacturing of stainless steel[J]. Physics Procedia, 2015, 78:377-387.
[98] YADROITSEV I, KRAKHMALEV P, YADROITSAVA I. Selective laser melting of Ti₆Al₄V alloy for biomedical applications:Temperature monitoring and microstructural evolution[J]. Journal of Alloys and Compounds, 2014, 583:404-409.
[99] OKUNKOVA A, VOLOSOVA M, PERETYAGIN P, et al. Experimental approbation of selective laser melting of powders by the use of non-Gaussian power density distributions[J]. Physics Procedia, 2014, 56:48-57.
[100] LANE B, ZHIRNOV I, MEKHONTSEV S, et al. Transient laser energy absorption, co-axial melt pool monitoring, and relationship to melt pool morphology[J]. Additive Manufacturing, 2020, 36:101504.
[101] AMINZADEH M, KURFESS T R. Online quality inspection using Bayesian classification in powder-bed additive manufacturing from high-resolution visual camera images[J]. Journal of Intelligent Manufacturing, 2019, 30(6):2505-2523.
[102] MONTAZERI M, YAVARI R, RAO P, et al. In-process monitoring of material cross-contamination in laser powder bed fusion[C]//Proceedings of ASME 201813th International Manufacturing Science and Engineering Conference, 2018.
[103] NADIPALLI V K, ANDERSEN S A, NIELSEN J S, et al. Considerations for interpreting in-situ photodiode sensor data in pulsed mode laser[C]//Proceedings of the Joint Special Interest Group meeting between euspen and ASPE Advancing Precision in Additive Manufacturing, 2019:66-69.
[104] ZHANG K, LIU T T, LIAO W H, et al. Photodiode data collection and processing of molten pool of alumina parts produced through selective laser melting[J]. Optik, 2018, 156:487-497.
[105] GÖGELEIN A, LADEWIG A, ZENZINGER G, et al. Process monitoring of additive manufacturing by using optical tomography[C]//Proceedings of the 2018 International Conference on Quantitative InfraRed Thermography, 2018.
[106] HU Y N, WU S C, WITHERS P J, et al. The effect of manufacturing defects on the fatigue life of selective laser melted Ti-6Al-4V structures[J]. Materials & Design, 2020, 192:108708.
[107] KRAUSS H, ESCHEY C, ZAEH M F. Thermography for monitoring the selective laser melting process[C]//23rd Annual International Solid Freeform Fabrication Symposium-an Additive Manufacturing Conference, 2012.
[108] MOYLAN S, WHITENTON E, LANE B, et al. Infrared thermography for laser-based powder bed fusion additive manufacturing processes[C]//AIP Publishing LLC, 2014.
[109] ZHENG L P, ZHANG Q, CAO H Z, et al. Melt pool boundary extraction and its width prediction from infrared images in selective laser melting[J]. Materials & Design, 2019, 183:108110.
[110] ZHIRNOV I, PROTASOV C, KOTOBAN D, et al. New approach of true temperature restoration in optical diagnostics using IR-camera[J]. Journal of Thermal Spray Technology, 2017, 26(4):648-660.
[111] RODRIGUEZ E, MIRELES J, TERRAZAS C A, et al. Approximation of absolute surface temperature measurements of powder bed fusion additive manufacturing technology using in situ infrared thermography[J]. Additive Manufacturing, 2015, 5:31-39.
[112] LANE B, MOYLAN S, WHITENTON E, et al. Thermographic measurements of the commercial laser powder bed fusion process at NIST[J]. Rapid Prototyping Journal, 2016, 22(5):778-787.
[113] JALALAHMADI B, LIU J, RIOS J, et al. In-process defect monitoring and correction in additive manufacturing of aluminum alloys[C]//Vertical Flight Society's 75th Annual Forum & Technology Display, 2019.
[114] 袁景光, 李宇, 刘京南, 等. 选区激光熔化金属成型熔池温度的在线检测[J]. 中国激光, 2020, 47(3):0302008. YUAN J G, LI Y, LIU J N, et al. Online detection of molten pool temperature during metal forming based on selective laser melting[J]. Chinese Journal of Lasers, 2020, 47(3):0302008(in Chinese).
[115] RAPLEE J, GOCKEL J, LIST F, et al. Towards process consistency and in situ evaluation of porosity during laser powder bed additive manufacturing[J]. Science and Technology of Welding and Joining, 2020, 25(8):679-689.
[116] KLESZCZYNSKI S, ZUR JACOBSMüHLEN J, REINARZ B, et al. Improving process stability of laser beam melting systems[C]//Fraunhofer Direct Digital Manufacturing Conference, 2014.
[117] GOBERT C, REUTZEL E W, PETRICH J, et al. Application of supervised machine learning for defect detection during metallic powder bed fusion additive manufacturing using high resolution imaging[J]. Additive Manufacturing, 2018, 21:517-528.
[118] ZUR JACOBSMVHLEN J, KLESZCZYNSKI S, WITT G, et al. Detection of elevated regions in surface images from laser beam melting processes[C]//IECON 2015-41 st Annual Conference of the IEEE Industrial Electronics Society. Piscataway:IEEE Press, 2015:1270-1275.
[119] CAGGIANO A, ZHANG J J, ALFIERI V, et al. Machine learning-based image processing for on-line defect recognition in additive manufacturing[J]. CIRP Annals, 2019, 68(1):451-454.
[120] 姚永臻, 陈波, 檀财旺, 等. 激光增材制造光致等离子体光谱分析[J]. 应用激光, 2017, 37(3):346-350. YAO Y Z, CHEN B, TAN C W, et al. Spectral analysis of laser induced plasma in laser additive manufacturing[J]. Applied Laser, 2017, 37(3):346-350(in Chinese).
[121] DAVIS G, RAJAGOPAL P, BALASUBRAMANIAM K, et al. Laser generation of narrowband lamb waves for in-situ inspection of additively manufactured metal components[C]//AIP Conference Proceedings, 2019.
[122] MARSHALL G J, YOUNG W J, THOMPSON S M, et al. Understanding the microstructure formation of Ti-6Al-4V during direct laser deposition via in situ thermal monitoring[J]. JOM, 2016, 68(3):778-790.
[123] FURUMOTO T, UEDA T, ALKAHARI M R, et al. Investigation of laser consolidation process for metal powder by two-color pyrometer and high-speed video camera[J]. CIRP Annals, 2013, 62(1):223-226.
[124] ALBERTS D, SCHWARZE D,WITT G. High speed melt pool & laser power monitoring for selective laser melting (SLM)[C]//9th International Conference on Photonic Technologies LANE, 2016:1-4.
[125] GÖKHAN D A, DE GIORGI C, PREVITALI B. Design and implementation of a multisensor coaxial monitoring system with correction strategies for selective laser melting of a maraging steel[J]. Journal of Manufacturing Science and Engineering, 2018, 140(4):041003.
[126] MONTAZERI M, RAO P. Sensor-based build condition monitoring in laser powder bed fusion additive manufacturing process using a spectral graph theoretic approach[J]. Journal of Manufacturing Science and Engineering, 2018, 140(9):091002.
[127] LANE B, WHITENTON E, MOYLAN S. Multiple sensor detection of process phenomena in laser powder bed fusion[C]//Thermosense:Thermal Infrared Applications XXXVIII, 2016:986104.
[128] SNELL R, TAMMAS-WILLIAMS S, CHECHIK L, et al. Methods for rapid pore classification in metal additive manufacturing[J]. JOM, 2020, 72(1):101-109.
[129] de SOUZA B F R, SABBAGHI A, HUANG Q. Automated geometric shape deviation modeling for additive manufacturing systems via Bayesian neural networks[J]. IEEE Transactions on Automation Science and Engineering, 2020, 17(2):584-598.
[130] SILBERNAGEL C, AREMU A, ASHCROFT I. Using machine learning to aid in the parameter optimisation process for metal-based additive manufacturing[J]. Rapid Prototyping Journal, 2019, 26(4):625-637.
[131] YUAN B D, GUSS G M, WILSON A C, et al. Machine-learning-based monitoring of laser powder bed fusion[J]. Advanced Materials Technologies, 2018, 3(12):1800136.
[132] RAITANEN N, YLANDER P. A data-driven approach based on statistical learning modeling for process monitoring and quality assurance of metal powder additive manufacturing[J]. EOS, 2018, 1000(290):3987102.
[133] REN K, CHEW Y, ZHANG Y F, et al. Thermal field prediction for laser scanning paths in laser aided additive manufacturing by physics-based machine learning[J]. Computer Methods in Applied Mechanics and Engineering, 2020, 362:112734.
[134] 叶冬森. 选择性激光熔化过程的状态监测方法研究[D]. 合肥:中国科学技术大学, 2018:27-45. YE D S. Study of in-situ monitoring methods in selective laser melting process[D]. Hefei:University of Science and Technology of China, 2018:27-45(in Chinese).
[135] YE D S, FUH Y J, ZHANG Y J, et al. Defects recognition in selective laser melting with acoustic signals by SVM based on feature reduction[J]. IOP Conference Series:Materials Science and Engineering, 2018, 436:012020.
[136] MAHATO V, OBEIDI M A, BRABAZON D, et al. Detecting voids in 3D printing using melt pool time series data[J]. Journal of Intelligent Manufacturing, 2020:1-8.
[137] ZHAN Z X, LI H. Machine learning based fatigue life prediction with effects of additive manufacturing process parameters for printed SS 316L[J]. International Journal of Fatigue, 2021, 142:105941.
[138] OKARO I A, JAYASINGHE S, SUTCLIFFE C, et al. Automatic fault detection for laser powder-bed fusion using semi-supervised machine learning[J]. Additive Manufacturing, 2019, 27:42-53.
[139] LI X, JIA X D, YANG Q B, et al. Quality analysis in metal additive manufacturing with deep learning[J]. Journal of Intelligent Manufacturing, 2020, 31(8):2003-2017.
[140] RAZVI S S, FENG S, NARAYANAN A, et al. A review of machine learning applications in additive manufacturing[C]//Proceedings of ASME 2019 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, 2019
[141] DRUZGALSKI C L, ASHBY A, GUSS G, et al. Process optimization of complex geometries using feed forward control for laser powder bed fusion additive manufacturing[J]. Additive Manufacturing, 2020, 34:101169.
[142] DEVESSE W, DE BAERE D, HINDERDAEL M, et al. Model-based temperature feedback control of laser cladding using high-resolution hyperspectral imaging[J]. IEEE/ASME Transactions on Mechatronics, 2017, 22(6):2714-2722.
[143] PURTONEN T, KALLIOSAARI A, SALMINEN A. Monitoring and adaptive control of laser processes[J]. Physics Procedia, 2014, 56:1218-1231.
[144] FLEMING T G, NESTOR S G L, ALLEN T R, et al. Tracking and controlling the morphology evolution of 3D powder-bed fusion in-situ using inline coherent imaging[J]. Additive Manufacturing, 2020, 32:100978.
[145] RENKEN V, FREYBERG A, SCHVNEMANN K, et al. In-process closed-loop control for stabilising the melt pool temperature in selective laser melting[J]. Progress in Additive Manufacturing, 2019, 4(4):411-421.
[146] HUANG X K, TIAN X Y, ZHONG Q, et al. Real-time process control of powder bed fusion by monitoring dynamic temperature field[J]. Advances in Manufacturing, 2020, 8(3):380-391.
[147] VASILESKA E, DEMIR A G, COLOSIMO B M, et al. Layer-wise control of selective laser melting by means of inline melt pool area measurements[J]. Journal of Laser Applications, 2020, 32(2):022057.

E-mail：hkxb@buaa.edu.cn

关于我们

期刊社服务

专业学科

封面文章

友情链接

主管单位：中国科学技术协会主办单位：中国航空学会北京航空航天大学

激光选区熔化增材制造缺陷智能监测与过程控制综述

Review on intelligent monitoring of defects and process control of selective laser melting additive manufacturing

RichHTML

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价

[1]	段玉聪, 王学德, 周鑫, 张佩宇, 郭西洋, 成星, 樊军伟. 粉末床激光成形熔池辐射强度信号的机器学习[J]. 航空学报, 2022, 43(9): 425855-425855.
[2]	李志强, 陈玮. 高能束流加工技术在航空领域的应用进展[J]. 航空学报, 2022, 43(4): 526882-526882.
[3]	李涤尘, 鲁中良, 田小永, 张航, 杨春成, 曹毅, 苗恺. 增材制造——面向航空航天制造的变革性技术[J]. 航空学报, 2022, 43(4): 525387-525387.
[4]	姚燕生, 周瑞根, 张成林, 梅涛, 吴敏. 增材制造复杂金属构件表面抛光技术[J]. 航空学报, 2022, 43(4): 525202-525202.
[5]	张佩宇, 周鑫, 李应红. 单晶涡轮叶片高能束修复研究进展[J]. 航空学报, 2022, 43(4): 525610-525610.
[6]	李汇, 李光先, 高瑞麟, 金鑫, 刘璐, 李朝将, Songlin DING. 不锈钢增材制造件后处理工艺研究进展[J]. 航空学报, 2022, 43(4): 525847-525847.
[7]	李海泉, 陈小前, 左林玄, 赵卓林. 基于随机森林的飞行载荷代理模型分析方法[J]. 航空学报, 2022, 43(3): 225640-225640.
[8]	王天帅, 贺小帆, 王金宇, 李玉海. 基于双峰对数正态分布模型的DED-TA15钛合金DFR值估计方法[J]. 航空学报, 2022, 43(3): 225013-225013.
[9]	吴子轩, 张宁, 高凯烨, 彭锐. 基于风险偏好调整的随机森林算法的航班航程油量预测[J]. 航空学报, 2022, 43(2): 224933-224933.
[10]	王泽林, 籍日添, 惠心雨, 丁晨, 汪辉, 白俊强. 基于深度学习驱动的L型定向热疏导机理[J]. 航空学报, 2021, 42(6): 124242-124242.
[11]	李霓, 布树辉, 尚柏林, 李永波, 汤志荔, 张伟伟. 飞行器智能设计愿景与关键问题[J]. 航空学报, 2021, 42(4): 524752-524752.
[12]	任峰, 高传强, 唐辉. 机器学习在流动控制领域的应用及发展趋势[J]. 航空学报, 2021, 42(4): 524686-524686.
[13]	何创新, 邓志文, 刘应征. 湍流数据同化技术及应用[J]. 航空学报, 2021, 42(4): 524704-524704.
[14]	郭怡东, 马玉娥, 李佩谣. 增材制造钛合金微桁架夹芯板低速冲击响应[J]. 航空学报, 2021, 42(2): 423820-423820.
[15]	余敏, 罗建军, 王明明. 基于机器学习的空间翻滚目标实时运动预测[J]. 航空学报, 2021, 42(2): 324149-324149.