| [1] Su W. Aerodynamic optimization design based on computational fluid dynamics and surrogate model. Xi'an: School of Aeronautics, Northwestern Polytechnical University, 2007. (in Chinese) 苏伟. 基于CFD技术和代理模型的气动外形优化设计方法研究. 西安: 西北工业大学航空学院, 2007.[2] Takanashi S. An iterative procedure for three-dimensional transonic wing design by the integral equation method. AIAA-1984-2166, 1984.[3] Hua J. Study of transonic airfoil and wing design. Xi'an: School of Aeronautics, Northwestern Polytechnical University, 1989. (in Chinese) 华俊. 跨音速机翼和翼型的设计研究. 西安: 西北工业大学航空学院, 1989.[4] Van Egmond J A. Numerical optimization of target pressure distribution for subsonic and transonic airfoil design. AGARD CP-463 Reference 17, 1990.[5] Van den Dam R F, Van Egmond J A, Sloof J W. Optimization of target pressure distributions. AGARD-780 Reference 3. 1990.[6] Van den Dam R F. Constrained spanload optimization for minimum drag of multi-lifting surface configuration. AGARD-463 Reference 16, 1990.[7] Holmes P, Lumley J L, Berkooz G. Turbulence, coherent structures, dynamical systems and symmetry. Cambridge: Cambridge University Press, 1996: 86-113.[8] Legresley P, Alonso J. Investigation of non-linear projection for POD based reduced order models for aerodynamics. AIAA-2001-926, 2001.[9] Fukanaga K. Introduction to statistical pattern recognition. New York: Academic Press, 1990: 399-440.[10] Sirvoich L, Kirby M. Low-dimensional procedure for the characterization of human face. Journal of the Optical Society for America, 1987, 4(3): 519-524.[11] Patrick A, Legresley P, Alonso J. Airfoil design optimization using reduced order models based on proper orthogonal decomposition. AIAA-2000-2545, 2000.[12] Zhao S Y, Huang M K. Application of simulated annealing method and reduced order models based on POD to airfoil inverse design problems. Acta Aerodynamica Sinica, 2007, 25(2): 236-240. (in Chinese) 赵松原, 黄明恪. 模拟退火算法和降阶POD计算模态在翼型设计优化中的应用. 空气动力学学报, 2007, 25(2): 236-240.[13] Everson R, Sirovich L. The karhunen-loeve procedure for Gappy data. Journal of the Optical Society of American, 1995, 12(8): 1657-1664.[14] Sirovich L, Kirby M. Turbulence and dynamics of coherent structures. Part 1: coherent structures. Quarterly of Applied Mathematics, 1987, 45(3): 561-571.[15] Nathan E M, Lawrence S U. An application of gappy POD for subsonic cavity flow PIV data. Experiments in Fluids, 2007, 42(1): 79-91.[16] Daniele V, Georgr E K. Gappy data and reconstruction procedures for flow past a cylinder. Journal of Fluid Mechanics, 2004, 519: 315-336.[17] Bui-Thanh T, Damodaran M, Willcox K. Aerodynamic data reconstruction and inverse design using proper orthogonal decomposition. AIAA Journal, 2004, 42(8): 1501-1516.[18] Drela M. Xfoil: an analysis and design system for low Reynolds number airfoils. New York: Springer, 1989: 1-12.[19] Hicks R M, Henne P A. Wing design by numerical optimization. AIAA-1977-1247, 1977.[20] Sobieczky H. Parametric airfoil and wings. Notes on Numerical Fluid Mechanics, 1998, 68: 71-88.[21] Piegl L, Tiller W. The nurbs book. Heidelberg: Springer, 1997: 411-413.[22] Duan Y H, Cai J S, Liu Q H. Surrogate model based optimization for airfoil design. Acta Aeronautica et Astronautica Sinica, 2011, 32(4): 617-627. (in Chinese) 段焰辉, 蔡晋生, 刘秋洪. 基于代理模型方法的翼型优化设计. 航空学报, 2011, 32(4): 617-627.[23] Kulfan B M, Bussoletti J E. Fundamental parametric geometry representations for airfoil component shapes. AIAA-2006-6948, 2006. |
CJA
