导航
Archive
Research progress and prospects in hail impact resistance of aircraft structures
Chunyu BAI, Zihao ZHAO, Xiaochuan LIU, Yu ZHANG, Yazhou GUO
doi: 10.7527/S1000-6893.2025.32424
2025, (21): 532424-532424.
PDF [ 3692 K ]( 634 ) HTML
Structural reliability design for aero-engines: Review and prospects
Xi LIU, Dianyin HU, Yi WANG, Rongqiao WANG, Gaoxiang CHEN, Weihan KONG
doi: 10.7527/S1000-6893.2025.32625
2025, (21): 532625-532625.
PDF [ 3668 K ]( 888 ) HTML
Progress in application of cohesive zone model in fracture simulation of aircraft metallic thin-walled structures
Runjie GUO, Longkun LU, Zikang ZHOU, Shengnan WANG
doi: 10.7527/S1000-6893.2025.32330
2025, (21): 532330-532330.
PDF [ 5841 K ]( 279 ) HTML
Body freedom flutter ground test of flying wing aircraft
Binwen WANG, Qiaozhi SONG, Haoyu CHEN
doi: 10.7527/S1000-6893.2025.32758
2025, (21): 532758-532758.
PDF [ 3655 K ]( 297 ) HTML
A high-order asymptotic expansion analysis method for generalized periodic lattice structures
Shijie XU, Weihong ZHANG
doi: 10.7527/S1000-6893.2025.32386
2025, (21): 532386-532386.
PDF [ 9279 K ]( 260 ) HTML
Multi-physics coupling modeling of laser ablation process of carbon fiber woven composites
Qingyi LIU, Xu YANG, Yu ZHANG, Peng YAN, Yanfei CHEN, Chuliang YAN
doi: 10.7527/S1000-6893.2025.32372
2025, (21): 532372-532372.
PDF [ 3159 K ]( 226 ) HTML
Full-aircraft landing ground load and influencing factors for transport aircraft
Xiaochuan LIU, Shuibufu LIU, Xulong XI, Chunyu BAI, Xiaocheng LI
doi: 10.7527/S1000-6893.2025.32521
2025, (21): 532521-532521.
PDF [ 4438 K ]( 333 ) HTML
Dwell-fatigue crack growth behavior of FGH4108 alloy at high temperature
Hao QIN, Qiang LIU, Rong JIANG, Yingdong SONG, Qiang ZHANG, Jiantao LIU, Jian DENG, Tianjian LU
doi: 10.7527/S1000-6893.2025.32364
2025, (21): 532364-532364.
PDF [ 5453 K ]( 204 ) HTML
Simulation of piezoelectric guided wave propagation characteristics in multilayer heterogeneous structures for aerospace vehicles
Junxian SHEN, Yahui YANG, Shenfang YUAN
doi: 10.7527/S1000-6893.2025.32366
2025, (21): 532366-532366.
PDF [ 3592 K ]( 277 ) HTML
Aircraft structural health management method based on flight parameter-load-life digital twin models
Lei HUANG, Cong GUO, Xiaobo ZHANG, Liangchen SUN, Yinghui ZUO, Bo WANG, Kuo TIAN
doi: 10.7527/S1000-6893.2025.32382
2025, (21): 532382-532382.
PDF [ 5073 K ]( 267 ) HTML
Optimization method for primary load-bearing structure of blended wing body aircraft using reduced-dimensional models
Yan WANG, Liang CHEN, Yongming CAI, Lilong LUO
doi: 10.7527/S1000-6893.2025.32406
2025, (21): 532406-532406.
PDF [ 2119 K ]( 235 ) HTML
Optimization design of high-load-bearing opening structures in special configuration aircraft
Yanjie LIU, Mingqiang LI, Xuan GUO, Yanfei SU, Bintuan WANG, Yingju XUE
doi: 10.7527/S1000-6893.2025.32447
2025, (21): 532447-532447.
PDF [ 2954 K ]( 266 ) HTML
Load-bearing capacity of bar termination ends of reverse curvature reinforced wall panels
Nan CHANG, Shuaijie FAN, Weixian LIU, Zhenyong CHEN
doi: 10.7527/S1000-6893.2025.32391
2025, (21): 532391-532391.
PDF [ 2533 K ]( 195 ) HTML
A residual stiffness prediction approach for carbon fiber reinforced composite materials based on interpretable machine learning algorithms
Yubin LU, Xiaohua NIE, Zhen WU
doi: 10.7527/S1000-6893.2025.32249
2025, (21): 532249-532249.
PDF [ 3940 K ]( 781 ) HTML
Design and mechanical behavior of 3D printed high tensile negative Poisson’ s ratio metamaterials
Yi WANG, Hua LIU, Jialing YANG, Xianfeng YANG
doi: 10.7527/S1000-6893.2025.32361
2025, (21): 532361-532361.
PDF [ 6018 K ]( 218 ) HTML
Analysis of mechanical properties of composite-metal bolted panel under thermo-mechanical coupling condition
Kai LEI, Jingtao WU, Wenliang DENG
doi: 10.7527/S1000-6893.2025.32276
2025, (21): 532276-532276.
PDF [ 5316 K ]( 226 ) HTML
A multi-fidelity data-driven framework for predicting mechanical property distributions of composite structures and its validation
Kairui TANG, Zhe WANG, Xiangming CHEN, Baorang CUI, Yanhui CHEN, Puhui CHEN
doi: 10.7527/S1000-6893.2025.32180
2025, (21): 532180-532180.
PDF [ 7022 K ]( 603 ) HTML
Dynamic load suppression method for constraint point in full-scale aircraft fatigue test using elastic damping
Jianjun ZHENG, Mengmeng WANG, Bin MU, Sha WEI
doi: 10.7527/S1000-6893.2025.32283
2025, (21): 532283-532283.
PDF [ 3508 K ]( 225 ) HTML
Effect of strain rate on spall strength of Ti-6Al-4V dual-phase alloy
Qianhua YANG, Yang YANG, Binwen WANG, Yupei GUO
doi: 10.7527/S1000-6893.2025.32318
2025, (21): 532318-532318.
PDF [ 4675 K ]( 177 ) HTML
Practice of digital collaborative design for full-scale aircraft static test
Jianfeng ZHANG, Bing LIU, Tao LI, Chengrui ZHANG, Qiong GUO, Siyang LIU
doi: 10.7527/S1000-6893.2025.32300
2025, (21): 532300-532300.
PDF [ 7059 K ]( 285 ) HTML
Effect of delamination depth on compressive properties of aircraft composite laminates
Ziang LIU, Xitao ZHENG, Yingshi CHEN, Tianze DENG, Weijie MA
doi: 10.7527/S1000-6893.2025.32340
2025, (21): 532340-532340.
PDF [ 9295 K ]( 324 ) HTML
Open-hole tensile mechanical behavior of carbon/glass hybrid composites
Qiang ZHANG, Lei LI, Guangqi HUANG, Jiahui XIE, Guibin SONG
doi: 10.7527/S1000-6893.2025.32312
2025, (21): 532312-532312.
PDF [ 3871 K ]( 207 ) HTML
Multi-channel hybrid active noise control system for turboprop aircraft cabin
Hao SHEN, Ningjuan DONG, Tingyu CHEN, Yixiao CHEN, Xing SHEN
doi: 10.7527/S1000-6893.2025.32332
2025, (21): 532332-532332.
PDF [ 5790 K ]( 173 ) HTML
Fatigue test technology for a full-scale amphibious aircraft
Qi DING, Junchen GUO, Xin WANG, Jianfeng ZHANG, Tao LI, Zheng WANG
doi: 10.7527/S1000-6893.2025.32346
2025, (21): 532346-532346.
PDF [ 4964 K ]( 210 ) HTML
A network for fatigue crack segmentation and quantification using frequency-domain enhancement and linear attention mechanism
Baoquan SHI, Jiaming ZHOU, Wendong ZHANG, Xianmin CHEN, Qian HE
doi: 10.7527/S1000-6893.2025.32356
2025, (21): 532356-532356.
PDF [ 3424 K ]( 664 ) HTML
Transformer-based intelligent tracking method of aviation structure surface cracks
Jiaxin LI, Shuaishuai LYU, Yezi WANG, Yu YANG, Ziyue LI
doi: 10.7527/S1000-6893.2025.32355
2025, (21): 532355-532355.
PDF [ 5361 K ]( 190 ) HTML
Damage effect of high-energy laser on 2A12 aluminum alloy under boundary preload
Yu ZHANG, Dacheng LI, Xiaochuan LIU, Yulong LI
doi: 10.7527/S1000-6893.2025.32358
2025, (21): 532358-532358.
PDF [ 4244 K ]( 185 ) HTML
Failure behavior analysis of variable-stiffness composite open-hole plates based on an anisotropic phase-field model
Kai LIU, Fangli WANG, Binqi CHEN, Xiangming CHEN, Zishi SHEN, Mingbo TONG
doi: 10.7527/S1000-6893.2025.32380
2025, (21): 532380-532380.
PDF [ 3962 K ]( 484 ) HTML
Model-driven requirement capturing and capability matching of aircraft structural strength building-block verification
Peng ZOU, Junchao YANG, Xiangming CHEN, Lei LI, Yong LIANG, Yiwen LIU
doi: 10.7527/S1000-6893.2025.32418
2025, (21): 532418-532418.
PDF [ 8117 K ]( 175 ) HTML
Reliability evaluation of full-scale structural test based on ISMA-Stacking ensemble modeling and Bayesian fusion
Yunwen FENG, Yuhang CUI, Qian HE, Xiaofeng XUE, Jun LU
doi: 10.7527/S1000-6893.2025.32365
2025, (21): 532365-532365.
PDF [ 4633 K ]( 184 ) HTML
Design and implementation of topology optimization based on autonomous software SABRE architecture
Yaohui MA, Wenjie GUO, Tong GAO, Likai WANG, Liang CHANG
doi: 10.7527/S1000-6893.2025.32423
2025, (21): 532423-532423.
PDF [ 5241 K ]( 182 ) HTML
Calculation and analysis of thermo-acoustic coupling response characteristics of C/SiC thin plate with high-velocity airflow
Li LUO, Yuanchi SUN, Xuefeng ZOU, Fengtong ZHAO
doi: 10.7527/S1000-6893.2025.32353
2025, (21): 532353-532353.
PDF [ 4919 K ]( 176 ) HTML
Academic Quality
Download Ranking