基于双向密度函数的空天轴对称结构拓扑优化

doi:10.7527/S1000-6893.2024.30585

Abstract

Abstract:

The structure optimization configuration obtained by topology optimization is often difficult to meet the manufacturing constraints due to the existence of internal closed holes. To control the specific shape of topology optimization results， a bidirectional density distribution function is proposed based on variable density method for axisymmetric structures in aerospace equipment. By converting the design variables from the pseudo density of each element to the control parameters of the bidirectional density distribution function， the structural materials will change along a specific direction in the process of topology optimization. The final pseudo density field distribution will also change with the specific expression of bidirectional density distribution function. Then， a linear weighted filtering method is used to filter the design variables to obtain a smoother material boundary. Furthermore， the sensitivity analysis of the structural mass and the maximum von Mises stress response to the design variables is carried out respectively， and the topology optimization framework of minimizing the maximum von Mises stress of the structure under the mass constraint is established. Meanwhile， to avoid the topology optimization from falling into the local optimal solution too early， the extension updating method is adopted for the grey element control parameters and the stress P-norm coefficient in the iterative process. Finally， typical aero-engine disks with aerospace axisymmetric structure are used to carry out the example verification. Under the premise of meeting the quality constraints， the material distribution gradually evolves towards the direction of stress minimization in the optimization process. The obtained topology optimization configuration has clear solid space interface， uniform stress distribution and high material utilization rate， demonstrating the effectiveness of the proposed method.

Key words: topology optimization, bidirectional density distribution function, aerospace axisymmetric structure, sensitivity analysis, manufacturing constraint

CLC Number:

V214.5

Yongxin SHI, Kuo TIAN, Bo WANG. Topology optimization of aerospace axisymmetric structures based on bidirectional density function[J]. Acta Aeronautica et Astronautica Sinica, 2024, 45(S1): 730585.

Figures/Tables 20

Fig.1

Fig.2

Fig.3

Table 1

Expressions of radial density distribution functions

线段	η	$ρ 1 r k, η$	$∂ ρ 1 / ∂ r k$
a	$η < r k$	0	0
b	$r k ≤ η < r k + R s i n θ$	$R - R c o s α$	$t a n α$
c	$r k + R s i n θ ≤ η < r k + w - R s i n θ$	$1 - R + R c o s θ - k (η - r k - R s i n θ)$	k
d	$r k + w - R s i n θ ≤ η ≤ r k + w$	$1 - R + R c o s α$	$t a n α$
e	$η > r k + w$	1	0

Table 1

Table 2

Expressions of axial density distribution functions

线段	ξ	$ρ 2 b i, ξ$	$∂ ρ 2 / ∂ b i$
a	$ξ ≥ b i + w$	0	0
b	$b i + w - R s i n θ ≤ ξ < b i + w$	$R - R c o s α$	$t a n α$
c	$b i + R s i n θ ≤ ξ < b i + w - R s i n θ$	$1 - R + R c o s θ - k (ξ - b i - R s i n θ)$	k
d	$b i ≤ ξ ≤ b i + R s i n θ$	$1 - R + R c o s α$	$t a n α$
e	$ξ < b i$	1	0

Table 2

Fig.4

Fig.5

Fig.6

Fig.7

Fig.8

Fig.9

Fig.10

Fig.11

Fig.12

Fig.13

Fig.14

Fig.15

Fig.16

Fig.17

Fig.18

References 33

1	向有志，张垄元，王磊，等. 壁面压升可控的高超轴对称进气道优化设计［J］. 航空动力学报， 2011， 26（10）： 2193-2199.
	XIANG Y Z， ZHANG L Y， WANG L， et al. Optimization design of hypersonic axisymmetric inlet with controllable law of wall pressure rise［J］. Journal of Aerospace Power， 2011， 26（10）： 2193-2199 （in Chinese）.
2	NGIM D B， LIU J S， SOAR R C. Design optimization for manufacturability of axisymmetric continuum structures using metamorphic development［J］. International Journal of Solids and Structures， 2007， 44（2）： 685-704.
3	孙士平，胡坚堂，张卫红. 基于超椭圆方程和序列响应面法的回转壳开孔形状优化［J］. 航空学报， 2015， 36（11）： 3595-3607.
	SUN S P， HU J T， ZHANG W H. Shape optimization of openings on rotation shells based on super-elliptic function and sequential response surface method‍［J］. Acta Aeronautica et Astronautica Sinica， 2015， 36（11）： 3595-3607 （in Chinese）.
4	HUANG L， LI H Q， ZHENG K W， et al. Shape optimization method for axisymmetric disks based on mesh deformation and smoothing approaches［J］. Mechanics of Advanced Materials and Structures， 2023， 30（12）： 2532-2555.
5	GOMES R， HENRIQUES J， GATO L， et al. Hydrodynamic optimization of an axisymmetric floating oscillating water column for wave energy conversion［J］. Renewable Energy， 2012， 44： 328-339.
6	张坤，陆山. 基于UG、 Workbench平台航空发动机多盘转子结构自动优化方法［J］. 航空动力学报， 2018， 33（5）： 1158-1164.
	ZHANG K， LU S. Automatic optimization method for multi-disk rotor structure of aero-engine based on UG and Workbench platform［J］. Journal of Aerospace Power， 2018， 33（5）： 1158-1164 （in Chinese）.
7	国玉林，杨丰宇，姚剑飞，等. 基于多重优化的多级盘转子虚拟装配平衡方法［J］. 航空学报， 2024， 45（4）： 628323.
	GUO Y L， YANG F Y， YAO J F， et al. Multiple optimization based virtual assembly balance of multi-disk rotors considering multi-speed［J］. Acta Aeronautica et Astronautica Sinica， 2024， 45（4）： 628323 （in Chinese）.
8	脱伟，熊劲松，侯安平，等. 遗传算法在多级压气机气动优化设计中的应用［J］. 航空动力学报， 2007， 22（2）： 305-309.
	TUO W， XIONG J S， HOU A P， et al. Application of genetic algorithm to multi-stage compressor aerodynamic optimization design［J］. Journal of Aerospace Power， 2007， 22（2）： 305-309 （in Chinese）.
9	WANG B， WANG G M， HUANG L， et al. On the preliminary shape design of axisymmetric twin-web turbine discs considering the burst speed constraint［J］. Engineering Optimization， 2022， 54（12）： 2071-2086.
10	WANG B， WANG G M， SHI Y X， et al. Stress-constrained thermo-elastic topology optimization of axisymmetric disks considering temperature-dependent material properties‍［J］. Mechanics of Advanced Materials and Structures， 2022， 29（28）： 7459-7475.
11	STOJANOV D， WU X H， FALZON B G， et al. Axisymmetric structural optimization design and void control for selective laser melting［J］. Structural and Multidisciplinary Optimization， 2017， 56（5）： 1027-1043.
12	BENDSØE M P， KIKUCHI N. Generating optimal topologies in structural design using a homogenization method‍［J］. Computer Methods in Applied Mechanics and Engineering， 1988， 71（2）： 197-224.
13	SIGMUND O， MAUTE K. Topology optimization approaches： A comparative review［J］. Structural and Multidisciplinary Optimization， 2013， 48（6）： 1031-1055.
14	BENDSØE M P. Optimal shape design as a material distribution problem［J］. Structural Optimization， 1989， 1（4）： 193-202.
15	ZHOU M， FLEURY R， SHYY Y K， et al. Progress in topology optimization with manufacturing constraints［C］∥ Proceedings of the 9th AIAA/ISSMO Symposium on Multidisciplinary Analysis and Optimization. Reston： AIAA， 2002.
16	LU J N， CHEN Y H. Manufacturable mechanical part design with constrained topology optimization［J］. Proceedings of the Institution of Mechanical Engineers， Part B： Journal of Engineering Manufacture， 2012， 226（10）： 1727-1735.
17	LEIVA J， WATSON B， KOSAKA I. An analytical directional growth topology parameterization to enforce manufacturing requirements［C］∥ Proceedings of the 45th AIAA/ASME/ASCE/AHS/ASC Structures， Structural Dynamics & Materials Conference. Reston： AIAA， 2004.
18	LEIVA J， WATSON B， KOSAKA I. An analyticall Bi-directional growth parameterization to obtain optimal castable topology designs［C］∥ Proceedings of the 10th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference. Reston： AIAA， 2004.
19	GERSBORG A R， ANDREASEN C S. An explicit parameterization for casting constraints in gradient driven topology optimization［J］. Structural and Multidisciplinary Optimization， 2011， 44（6）： 875-881.
20	ZHU J H， GU X J， ZHANG W H， et al. Structural design of aircraft skin stretch-forming die using topology optimization‍［J］. Journal of Computational and Applied Mathematics， 2013， 246： 278-288.
21	LIU S T， LI Q H， CHEN W J， et al. H-DGTP—A Heaviside-function based directional growth topology parameterization for design optimization of stiffener layout and height of thin-walled structures［J］. Structural and Multidisciplinary Optimization， 2015， 52（5）： 903-913.
22	ZHOU L， ZHANG W H. Topology optimization method with elimination of enclosed voids［J］. Structural and Multidisciplinary Optimization， 2019， 60（1）： 117-136.
23	LEE H Y， ZHU M， GUEST J K. Topology optimization considering multi-axis machining constraints using projection methods‍［J］. Computer Methods in Applied Mechanics and Engineering， 2022， 390： 114464.
24	FENG S Q， ZHANG W H， MENG L， et al. Stiffener layout optimization of shell structures with B-spline parameterization method‍［J］. Structural and Multidisciplinary Optimization， 2021， 63（6）： 2637-2651.
25	QIAN X P. Topology optimization in B-spline space［J］. Computer Methods in Applied Mechanics and Engineering， 2013， 265： 15-35.
26	ZHANG W H， ZHAO L Y， GAO T， et al. Topology optimization with closed B-splines and Boolean operations［J］. Computer Methods in Applied Mechanics and Engineering， 2017， 315： 652-670.
27	LI Q H， CHEN W J， LIU S T， et al. Topology optimization design of cast parts based on virtual temperature method［J］. Computer-Aided Design， 2018， 94： 28-40.
28	LI Q H， CHEN W J， LIU S T， et al. Structural topology optimization considering connectivity constraint［J］. Structural and Multidisciplinary Optimization， 2016， 54（4）： 971-984.
29	WANG B， WANG G M， TIAN K， et al. A preliminary design method for axisymmetric turbomachinery disks based on topology optimization［J］. Proceedings of the Institution of Mechanical Engineers， Part C： Journal of Mechanical Engineering Science， 2022， 236（7）： 3313-3322.
30	SIGMUND O. Morphology-based black and white filters for topology optimization［J］. Structural and Multidisciplinary Optimization， 2007， 33（4）： 401-424.
31	SIGMUND O， PETERSSON J. Numerical instabilities in topology optimization： A survey on procedures dealing with checkerboards， mesh-dependencies and local minima［J］. Structural Optimization， 1998， 16（1）： 68-75.
32	BRUGGI M. On an alternative approach to stress constraints relaxation in topology optimization［J］. Structural and Multidisciplinary Optimization， 2008， 36（2）： 125-141.
33	YANG D X， LIU H L， ZHANG W S， et al. Stress-constrained topology optimization based on maximum stress measures［J］. Computers & Structures， 2018， 198： 23-39.

[1]	Zhouwei FAN, Chuihuan KONG, Ming LIU, Zhaoguang TAN. Sensitivity analysis on key parameters of hybrid hydrogen fuel cell commercial aircraft [J]. Acta Aeronautica et Astronautica Sinica, 2025, 46(9): 631066-631066.
[2]	Jihong ZHU, Yifei ZHANG, Yahui ZHANG, Jie HOU, Weihong ZHANG. Shape preserving design of aerospace structure: From geometric feature to energy channeling [J]. Acta Aeronautica et Astronautica Sinica, 2025, 46(6): 531833-531833.
[3]	Shanyue GUAN, Zhengyu TIAN, Wenjia XIE, Qianyue FU, Yuhang CHU, Jiajun ZHU. Analysis of plasma chemical reactions of hypersonic reentry blunt in flight corridor [J]. Acta Aeronautica et Astronautica Sinica, 2025, 46(18): 131735-131735.
[4]	Qi WANG, Long WU, Zhen LIU, Jianxia LIU, Liang XIA. Topology optimization design of thermoelastic multi-configuration gradient lattice structures [J]. Acta Aeronautica et Astronautica Sinica, 2024, 45(23): 230367-230367.
[5]	Le JIANG, Yibiao CHEN, Yanjun LI, Guilin LI, Tao LIU. Flow and separation characteristics of pressurized centrifugal separator for aero⁃engine [J]. Acta Aeronautica et Astronautica Sinica, 2024, 45(2): 128675-128675.
[6]	Tianhe GAO, Kuo TIAN, Lei HUANG, Shu ZHANG, Zengcong LI. Data⁃driven shape⁃topology optimization method for curved shells [J]. Acta Aeronautica et Astronautica Sinica, 2024, 45(2): 428806-428806.
[7]	Tianyuan JI, Wuli CHU, Haoguang ZHANG, Zhengtao GUO, Dejun MENG. Effect of data-driven twist deviation on compressor performance [J]. Acta Aeronautica et Astronautica Sinica, 2024, 45(19): 629938-629938.
[8]	Ming HUANG, Kaiyuan ZHANG, Zhigang LI, Jun LI. Uncertainty quantification of aerothermal performance of squealer tip with film cooling structure [J]. Acta Aeronautica et Astronautica Sinica, 2024, 45(19): 629979-629979.
[9]	Qingfa LUO, Qin YU, Gang LI, Dong WANG. Layout optimization of control sensors in environmental vibration test [J]. Acta Aeronautica et Astronautica Sinica, 2024, 45(18): 0-229843-.
[10]	Wei WANG, Hao WANG, Ai ZHOU, He FENG. Stepwise optimal design for shape and topology of variable camber wing [J]. Acta Aeronautica et Astronautica Sinica, 2024, 45(18): 129990-129990.
[11]	Jiaxing ZHU, Yining LI, Shiyong NIU, Yisong TIAN, Di LI, Yiming XIE. Global numerical calculation of fluid-structure coupling of aero micro-relief valve based on CFD computation domain division coupling technology [J]. Acta Aeronautica et Astronautica Sinica, 2024, 45(15): 630202-630202.
[12]	Shaoping ZHANG, Huiming GUO, Tong GAO, Weihong ZHANG. Design and manufacturing method of multi-scale integrated load bearing thin-walled structure for application in next-generation aeroengine based on advanced laser processing technology [J]. Acta Aeronautica et Astronautica Sinica, 2024, 45(13): 630037-630037.
[13]	Wentao LI, Yunqin HE, Wenbo LI, Yiyi ZHANG, Guozhu LIANG. 3D grain reverse design and shape optimization for solid rocket motor [J]. Acta Aeronautica et Astronautica Sinica, 2024, 45(11): 529089-529089.
[14]	Kailing ZHANG, Siyi LI, Yi DUAN, Chao YAN. Uncertainty quantification of parameters in SST turbulence model for inlet simulation [J]. Acta Aeronautica et Astronautica Sinica, 2023, 44(S2): 729429-729429.
[15]	Xiaozhe SUN, Dong HOU, Jianzhong YANG. Mechanism and sensitivity of force fight in dual redundant electromechanical actuators [J]. Acta Aeronautica et Astronautica Sinica, 2023, 44(S1): 727661-727661.

Topology optimization of aerospace axisymmetric structures based on bidirectional density function

RichHTML

PDF (PC)

Knowledge

Abstract

Cite this article

share this article

Figures/Tables 20

References 33

Related Articles 15

Recommended Articles

Metrics

Comments