[1] Wu J F, Luo X F, Fan Z L. Flow control method to improve cavity flow and store separation characteristic[J]. Acta Aeronautica et Astronautica Sinica, 2009, 30(10): 1840-1845 (in Chinese). 吴继飞, 罗新福, 范召林.内埋式弹舱流场特性及武器分离特性改进措施[J]. 航空学报, 2009, 30(10): 1840-1845.[2] Feng Q, Cui X C. Study on integrated flow control for weapons bay of flying wing configuration aircraft[J]. Acta Aeronautica et Astronautica Sinica, 2012, 33(5): 781-787 (in Chinese). 冯强, 崔晓春. 飞翼布局飞机武器舱综合流动控制技术研究[J]. 航空学报, 2012, 33(5): 781-787.[3] Perng S W. Passive control of pressure oscillations in hypersonic cavity flow[D]. Austin: University of Texas at Austin, 1996.[4] Barter J W. Prediction and passive control of fluct-uating pressure loads produced by shock-induced turbulent boundary layer separation[D]. Austin: University of Texas at Austin, 1995.[5] Shaw L. Active control for cavity acoustics, A1AA-1998-2347[R].Reston: AIAA, 1998.[6] Miehael J A.Control of cavity resonance through very high frequency forcing, AIAA-2000-1905[R]. Reston: AIAA, 2000.[7] Smith B R, Welterlen T J, Maines B H, et al.Weapons bay acoustic suppression from rod spoilers,AIAA-2002-0662[R].Reston: AIAA, 2002.[8] Alvi F S, Elavarasan R, Garg G, et al. Control of supersonic impinging jet using microjets, AIAA-2000-2236 [R]. Reston: AIAA, 2000.[9] Bower W W, Kibens V, Cary A W, et al. High-frequency excitation active flow control for high-speed weapon release(HIFEX), AIAA-2004-2513[R]. Reston: AIAA, 2004.[10] Tam C K W. Computational aeroacoustics:an overview of computational challenges and applications[J]. International Journal of Computational Fluid Dynamics, 2004, 18(6): 547-567.[11] Long S L, Nie H, Xue C J, et al. Simulation and experiment on aeroacoustic noise characteristics of aircraft landing gear[J]. Acta Aeronautica et Astronautica Sinica,2012, 33(6): 1002-1013 (in Chinese). 龙双丽, 聂宏, 薛彩军, 等. 飞机起落架气动噪声特性仿真与试验[J]. 航空学报, 2012, 33(6): 1002-1013.[12] Hou Z X, Yi S H, Wang C Y. Numerical analysis of supersonic open cavity[J]. Journal of Propulsion Technology, 2001, 22(5): 400-403 (in Chinese). 侯中喜, 易仕和, 王承尧. 超声速开式空腔流动的数值模拟[J]. 推进技术, 2001, 22(5): 400-403.[13] Li X D, Liu J D, Gao J H. Numerical simulation of flow-induced oscillation and sound generation in a cavity[J]. Chinese Journal of Theoretical and Applied Mechanics, 2006, 38(5): 599-604 (in Chinese). 李晓东, 刘靖东, 高军辉. 空腔流激振荡发声的数值模拟研究[J]. 力学学报, 2006, 38(5): 599-604.[14] Batten P, Ribaldone E, Casella M, et al. Towards a generalized non-linear acoustics solver, AIAA-2004-3001[R]. Reston: AIAA, 2004[15] Batten P,Goldberg U,Chakravarthy S. Reconstructed sub-grid methods for acoustics predictions at all Reynolds Numbers, AIAA-2002-2511[R]. Reston: AIAA, 2002.[16] Silva C R I, Almeida O, Batten P. Investigation of an axi-symmetric subsonic turbulent jet using computational aeroacoustics tools,AIAA-2007-3656[R]. Reston: AIAA, 2007.[17] Aflalo B S, Simoes L G C, Silva R G, et al. Comparative analysis of turbulence models for slat noise source calculations employing unstructured meshes, AIAA-2010-3838 [R]. Reston: AIAA, 2010.[18] Rossiter J E.Wind tunnel experiments on the flow over rectangular cavities at subsonic and transonic speeds, RAE Technical Report No. 64037[R]. Hampshire: Royal Aircraft Establishment, 1964.[19] Unalmis O H, Clemens N T, Dolling D S. Experimental study of shear-layer/acoustics coupling in Mach 5 cavity flow[J]. AIAA Journal, 2001, 39(2): 242-252. |