| [1] Moore F K, Greitzer E M. A theory of post-stall transients in axial compression systems: Part Ⅰ—development of equations. ASME Paper, 85-GT-171, 1985.[2] Greitzer E M, Moore F K. A theory of post-stall transients in axial compression systems: Part Ⅱ—application. ASME Paper, 85-GT-172, 1985.[3] Garnier V H, Epstein A H, Greitzer E M. Rotating waves as a stall inception indication in axial compressors. ASME Journal of Turbomachinery, 1991, 113(2): 290- 301.[4] Camp T R, Day I J. A study of spike and modal stall phenomena in a low-speed axial compressor. ASME Journal of Turbomachinery, 1998, 120(3): 393-401.[5] Tong Z T. The interactive unsteady mechanism between tip leakage vortex, stall inception and micro tip injection in low-speed axial compressor. Beijing: Institute of Engineering Thermophysics, Chinese Academy of Sciences, 2006. (in Chinese) 童志庭.轴流压气机中叶尖泄漏涡、失速先兆、叶尖微喷气非定常关联性的实验研究. 北京: 中国科学院工程热物理研究所, 2006.[6] Lu X G, Chu W L, Zhu J Q. Mechanism of the interaction between casing treatment and tip leakage flow in a subsonic axial compressor. ASME Paper, 2006-GT-90077, 2006.[7] McDougall, M, Cumpsty N A, Hynes T P. Stall inception in axial compressor. ASME Journal of Turbomachinery, 1990, 112(1): 116-125.[8] Cumpsty N A. Part-circumference casing treatment and the effect on compressor stall. ASME Paper, 89-GT-312, 1989.[9] Furukawa M, Inoue M, Saiki K, et al. The role of tip leakage vortex breakdown in compressor rotor aerodynamics. ASME Journal of Turbomachinery, 1999, 121(3): 469-480.[10] Furukawa M, Saiki K, Yamada K, et al. Unsteady flow behavior due to breakdown of tip leakage vortex in an axial compressor rotor at near-stall condition. ASME Paper, 2000-GT-666, 2000.[11] Mailach, R, Lehmann, I, Vogeler K. Rotating instabilities in an axial compressor originating from the fluctuating blade tip vortex. ASME Paper, 2000-GT-506, 2000.[12] Maerz J, Hah C, Neise W. An experimental and numerical investigation into the mechanism of rotating instability. ASME Journal of Turbomachinery, 2002, 124(3): 367- 374.[13] Hoying D A, Tan C S, Vo H D, et al. Role of blade passage flow structures in axial compressor rotating stall inception. ASME Journal of Turbomachinery, 1999, 121(4): 735-742.[14] Vo H D, Tan C S, Greitzer E M. Criteria for spike initiated rotating stall. ASME Paper, 2005-GT-68374, 2005.[15] Weichert S. Tip clearance flows in axial compressors: stall inception and stability enhancement. Cambridge: University of Cambridge, 2011. |
CJA
