1 |
LUCY B W, REED J. A survey of turbine engine temperature distortion generator requirements and concept trade study[C]∥ 47th AIAA/ASME/SAE/ASEE Joint Propulsion Conference & Exhibit. Reston: AIAA, 2011.
|
2 |
TAFTI D K, VANKA S P. Hot gas environment around STOVL aircraft in ground proximity. Ⅱ—Numerical study[J]. Journal of Aircraft, 1992, 29(1): 20-27.
|
3 |
阎超. 航空CFD四十年的成就与困境[J]. 航空学报, 2022, 43(10): 29-65.
|
|
YAN C. Achievements and predicaments of CFD in aeronautics in past forty years[J]. Acta Aeronautica et Astronautica Sinica, 2022, 43(10): 29-65 (in Chinese).
|
4 |
RUDEY R A, ANTL R J. The effect of inlet temperature distortion on the performance of a turbo-fan engine compressor system[C]∥ 6th Propulsion Joint Specialist Conference. Reston: AIAA, 1970.
|
5 |
叶培梁, 刘大响. 进口温度畸变对涡扇发动机稳定性影响的试验研究[J]. 燃气涡轮试验与研究, 2001, 14(1): 38-45.
|
|
YE P L, LIU D X. An experimental investigation in effects of inlet temperature distortion on turbofan stability[J]. Gas Turbine Experiment and Research, 2001, 14(1): 38-45 (in Chinese).
|
6 |
HYNES T P, GREITZER E M. A method for assessing effects of circumferential flow distortion on compressor stability[J]. Journal of Turbomachinery, 1987, 109(3): 371-379.
|
7 |
STENNING A H. Inlet distortion effects in axial compressors[J]. Journal of Fluids Engineering, 1980, 102(1): 7-13.
|
8 |
MARBLE F E. Three-dimensional flow in turbomachines, aerodynamics of turbines and compressors[M]. Princeton: Princeton University Press, 1964.
|
9 |
ADAMCZYK J J. Model equation for simulating flows in multistage turbomachinery: NASA-TM-86869[R]. Washington, D. C. : NASA, 1984.
|
10 |
HALE A, DAVIS M, KNEILE K. Turbine engine analysis compressor code: TEACC. I—Technical approach and steady results[C]∥ 32nd Aerospace Sciences Meeting. Reston: AIAA, 1994
|
11 |
HALE A, CHALK J, KLEPPER J, et al. Turbine engine analysis compressor code—TEACC. I—Multi-stage compressors and inlet distortion[C]∥ 17th Applied Aerodynamics Conference. Reston: AIAA, 1999.
|
12 |
HALE A, DAVIS M, SIRBAUGH J. A numerical simulation capability for analysis of aircraft inlet-engine compatibility[J]. Journal of Engineering for Gas Turbines and Power, 2006, 128(3): 473-481.
|
13 |
GUO J, HU J, TU B F, et al. A mixed-fidelity computational model of aero engine for inlet distortion[J]. Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aero-space Engineering, 2019, 233(14): 5295-5309.
|
14 |
LI Q S, LYU Y Z, PAN T Y, et al. Development of a coupled supersonic inlet-fan Navier-Stokes simulation method[J]. Chinese Journal of Aeronautics, 2018, 31(2): 237-246.
|
15 |
叶巍, 唐世建, 白磊. 进气温度畸变对某发动机稳定性影响的研究[J]. 燃气涡轮试验与研究, 2006, 19(4): 6-10, 15.
|
|
YE W, TANG S J, BAI L. Study on the effects of inlet temperature distortion on stability of an engine[J]. Gas Turbine Experiment and Research, 2006, 19(4): 6-10, 15 (in Chinese).
|
16 |
叶巍, 乔渭阳, 侯敏杰. 发动机在进气温度畸变条件下的特性研究[J]. 推进技术, 2008, 29(6): 677-680.
|
|
YE W, QIAO W Y, HOU M J. Study for the effects of inlet temperature distortion on engine performance[J]. Journal of Propulsion Technology, 2008, 29(6): 677-680 (in Chinese).
|
17 |
黄顺洲, 胡骏. 进气畸变对发动机稳定性影响的分析模型[J]. 推进技术, 2006, 27(5): 426-430.
|
|
HUANG S Z, HU J. Model of the effect of inlet flow distortions on engine stability[J]. Journal of Propulsion Technology, 2006, 27(5): 426-430 (in Chinese).
|
18 |
张百灵, 李军, 江勇, 等. 进气总温畸变在压气机中的数值模拟[J]. 推进技术, 2009, 30(2): 182-186.
|
|
ZHANG B L, LI J, JIANG Y, et al. Numerical simulation of the inlet total temperature distortion in the compressor[J]. Journal of Propulsion Technology, 2009, 30(2): 182-186 (in Chinese).
|
19 |
WESTON D B, GORRELL S E, MARSHALL M L, et al. Analysis of turbofan performance under total pressure distortion at various operating points[C]∥ Proceedings of the ASME Turbo Expo 2015: Turbine Technical Conference and Exposition. Montreal: ASME, 2015.
|
20 |
李志平, 陈家辉, 朱星宇, 等. 压力-温度组合畸变下航空发动机失速/喘振适航审定[J/OL]. 航空动力学报, (2022-08-02) [2023-05-05]. .
|
|
LI ZH P, CHEN J H, ZHU X Y, et al. Aero-engine stall/surge airworthiness certification study under combined pressure-temperature distortion[J/OL]. Journal of Aerospace Power, (2022-08-02) [2023-05-05]. (in Chinese).
|
21 |
尤延铖, 滕健, 郑晓刚, 等. 航空发动机进气温度畸变研究综述[J]. 南京航空航天大学学报, 2017, 49(3): 283-300.
|
|
YOU Y CH, TENG J, ZHENG X G, et al. Review of aero-engine temperature distortion research[J]. Journal of Nanjing University of Aeronautics & Astronautics, 2017, 49(3): 283-300 (in Chinese).
|
22 |
航空发动机设计手册总编委会. 航空发动机设计手册: 第7册—进排气装置[M]. 北京: 航空工业出版社, 2000.
|
|
General Editorial Board of Aeroengine Design Manual. Aeroengine design manual: Volume 7—Intake and exhaust arrangements[M]. Beijing: Aviation Industry Publishing Company, 2000 (in Chinese).
|
23 |
BAKHTIARI F, WARTZEK F, LEICHTFUß S, et al. Design and optimization of a new stator for the transonic compressor rig at TU Darmstadt: 270225[R]. Deutschland: DLR Aeronautics, 2015.
|
24 |
MÜLLER M W, SCHIFFER H, VOGES M, et al. Investigation of passage flow features in a transonic compressor rotor with casing treatments[C]∥ Proceedings of the ASME 2011 Turbo Expo: Turbine Technical Conference and Exposition. Vancouver: ASME, 2011.
|
25 |
BERGNER J, KINZEL M, SCHIFFER H, et al. Short length-scale rotating stall inception in a transonic axial compressor: experimental investigation[C]∥ Proceedings of the ASME Turbo Expo 2006: Power for Land, Sea, and Air. Barcelona: ASME, 2006.
|
26 |
BIELA C, MÜLLER M W, SCHIFFER H P, et al. Unsteady pressure measurement in a single stage axial transonic compressor near the stability limit[C]∥ Proceedings of the ASME Turbo Expo 2008: Power for Land, Sea, and Air. Berlin: ASME, 2008.
|
27 |
KLAUSMANN F, FRANKE D, FORET J, et al. Transonic compressor Darmstadt—Open test case Introduction of the TUDa open test case[J]. Journal of the Global Power and Propulsion Society, 2022, 6: 318-329.
|
28 |
WILCOX D C. Multiscale model for turbulent flows[J]. AIAA Journal, 1988, 26(11): 1311-1320.
|
29 |
VAHDATI M, SAYMA A I, FREEMAN C, et al. On the use of atmospheric boundary conditions for axial-flow compressor stall simulations[J]. Journal of Turbomachinery, 2005, 127(2): 349-351.
|
30 |
ZHANG W Q, VAHDATI M, ZHAO F ZH. Impact of exit duct dynamic response on compressor stability[J]. Journal of Turbomachinery, 2020, 142(11): 111006.
|
31 |
ZHANG W Q, VAHDATI M. Stall and recovery process of a transonic fan with and without inlet distortion[J]. Journal of Turbomachinery, 2020, 142(1): 011003.
|
32 |
KIM J, MOIN P, MOSER R. Turbulence statistics in fully developed channel flow at low Reynolds number[J]. Journal of Fluid Mechanics, 1987, 177: 133-166.
|
33 |
HE X, ZHU M M, XIA K L, et al. Validation and verification of RANS solvers for TUDa-GLR-OpenStage transonic axial compressor[J]. Journal of the Global Power and Propulsion Society, 2023, 7: 13-29.
|
34 |
SESHADRI P, PARKS G T, SHAHPAR S. Leakage uncertainties in compressors: the case of rotor 37[J]. Journal of Propulsion and Power, 2015, 31(1): 456-466.
|
35 |
MÖLLER D, SCHIFFER H P. On the mechanism of spike stall inception and near stall nonsynchronous vibration in an axial compressor[J]. Journal of Engineering for Gas Turbines and Power, 2021, 143(2): 021007.
|
36 |
HICKMAN A R, MORRIS S C. Characteristics of stable rotating stall cells in an axial compressor[C]∥ Proceedings of the ASME Turbo Expo 2017: Turbomachinery Technical Conference and Exposition. Charlotte: ASME, 2017.
|
37 |
VO H D, TAN C S, GREITZER E M. Criteria for spike initiated rotating stall[J]. Journal of Turbomachinery, 2008, 130(1): 11023-11029.
|