航空学报 > 2022, Vol. 43 Issue (7): 125596-125596   doi: 10.7527/S1000-6893.2021.25596

对转压气机变转速比失速类型试验

王昊1, 薛飞1, 岳少原1,2, 王掩刚1   

  1. 1. 西北工业大学 动力与能源学院, 西安 710072;
    2. 中国空气动力研究与发展中心 空天技术研究所, 绵阳 621000
  • 收稿日期:2021-03-30 修回日期:2021-06-09 发布日期:2021-06-08
  • 通讯作者: 王掩刚,E-mail:wyg704@nwpu.edu.cn E-mail:wyg704@nwpu.edu.cn
  • 基金资助:
    国家自然科学基金(51906205);国家科技重大专项(2017-II-0009-0023);陕西省自然科学基础研究计划(2019-JQ-620)

Test on stall types of contra-rotating compressor with variable speed ratios

WANG Hao1, XUE Fei1, YUE Shaoyuan1,2, WANG Yangang1   

  1. 1. School of Power and Energy, Northwestern Polytechnical University, Xi'an 710072, China;
    2. Aerospace Technology Institute, China Aerodynamics Research and Development Center, Mianyang 621000, China
  • Received:2021-03-30 Revised:2021-06-09 Published:2021-06-08
  • Supported by:
    National Natural Science Foundation of China (51906205); National Science and Technology Major Project (2017-II-0009-0023); Basic Research Program of Natural Science of Shaanxi Province (2019-JQ-620)

摘要: 对转压气机具有独特的气动布局,其失速形式相比常规布局压气机更加复杂且多变。本文在试验中通过进出口壁面静压孔和叶顶高频动态压力传感器阵列成功得到了不同转速比下的特性曲线及其失速起始-发展-恢复过程。结果表明:不同转速比下的特性曲线具有相似的变化规律,在失速起始-发展-恢复过程中均存在明显的迟滞环。当转速比≤1时,在失速起始阶段,失速扰动首先出现在后转子,随后在前后转子周向占据一定范围并旋转,方向与后转子一致。在退出失速时,失速扰动旋转速度提升且尺寸迅速减小。当转速比等于1.333时,失速扰动固定在周向某一位置并占据大概225°周向范围且几乎同时贯穿前后转子,失速恢复时失速扰动在1 s内迅速衰减直至完全消失。

关键词: 对转压气机, 失速扰动, 转速比, 失速迟滞, 动态压力测试

Abstract: Contra-rotating compressors have a unique aerodynamic configuration with a more complex and changeable stall form than conventional compressors. Through static pressure holes on the inlet and outlet wall and the high frequency dynamic pressure sensor array on the blade tip, the characteristic curves and the stall initiation-development-recovery process at different speed ratios are successfully obtained. The results show that the characteristic curves at different speed ratios have a similar variation law, with obvious hysteresis loops in the process of stall initiation-development-recovery. When the speed ratio is smaller than or equal to 1, the stall disturbance first appears in the rear rotor, and then occupies a certain range in the circumferential direction of the front and rear rotors, meanwhile rotating in the same direction as that of the rear rotor in the initiation phase of the stall. At the exit of the stall, the disturbance rotation speed increases while the size rapidly decreases. When the speed ratio equals to 1.333, the stall disturbance is fixed at a certain position in the circumferential direction, occupying a circumferential range of about 225° and penetrating both the front and rear rotors almost simultaneously. When the stall recovers, the disturbance decays rapidly in 1 s till complete disappearance.

Key words: contra-rotating compressors, stall disturbance, speed ratio, stall hysteresis, unsteady pressure measurementhttp

中图分类号: