航空学报 > 1997, Vol. 18 Issue (4): 390-394

高分辨率格式与钝舵绕流数值模拟

马汉东1, 李素循1, 吴礼义2   

  1. 1. 北京空气动力研究所;2. 北京航空航天大学流体力学研究所
  • 收稿日期:1997-01-13 修回日期:1997-03-18 出版日期:1997-08-25 发布日期:1997-08-25

NUMERICAL SIMULATION OF SUPERSONIC FLOW ABOUT BLUNT FIN WITH DIFFERENT HIGH RESOLUTION SCHEMES

Ma Handong1, Li Suxun1, Wu Liyi2   

  1. 1. Beijing Institute of Aerodynamics,Beijing,100074;2. Institute of Fluid Mechanics, Beijing University of Aeronautics and Astronautics, Beijing, 100083
  • Received:1997-01-13 Revised:1997-03-18 Online:1997-08-25 Published:1997-08-25

摘要:

采用Beam-Warming/TVD格式,Roe二阶、三阶以及四阶通量差分分裂格式数值计算雷诺平均Navier-Stokes方程,湍流附加粘性采用Baldwin-Lomax模型计算,针对超声速绕钝圆舵流动进行了数值模拟比较研究,计算给出了流场的详细结构,物面压力分布与实验值符合良好,尤其是Roe三阶格式给出了较好的计算结果,两个超声速回流区以及湍流边界层分离也得到了很好的数值模拟。

关键词: 钝舵, 激波/湍流边界层干扰, 分离, 高分辨率格式

Abstract:

The Reynolds averaged Navier Stokes equations are solved numerically by Beam Warming/TVD scheme, Roe second order, Roe third order and Roe fourth order flux difference splitting schemes Baldwin Lomax model is adopted for turbulence flow Thus a numerical study with different high resolution schemes for supersonic flow over a blunt fin mounted on a flat plate is made The computed results display flow structure in detail The pressure distributions on the surface show good agreement with the experimental data Especially, the Roe third order scheme gives the best results among those schemes The existence of two reversed flow supersonic zones is observed in the results

Key words: blunt fin, shock wave/turbulent boundary layer interaction, separation, high resolution schemes

中图分类号: