航空学报 > 2001, Vol. 22 Issue (4): 330-333

航空供氧面罩二维密封曲线设计

王兴伟, 袁修干   

  1. 北京航空航天大学人-机-环境系统工程研究所 北京 100083
  • 收稿日期:2000-05-11 修回日期:2000-08-24 出版日期:2001-08-25 发布日期:2001-08-25

TWO DIMENSIONAL SEALING CURVE DESIGN FOR OXYGEN MASKS

WANG Xing-wei, YUAN Xiu-gan   

  1. Institute of Men-Machine-Environment System Engineering, Beijing University of Aeronatics and Astronatics, Beijing 100083, China
  • Received:2000-05-11 Revised:2000-08-24 Online:2001-08-25 Published:2001-08-25

摘要:

分析调查了我国现装备面罩存在的问题,依据飞行员鼻、面部的二维特征数据分布、解剖结构以及供氧生理的需要,提出了新的面罩型号划分方法,确定出各型号面罩所对应的鼻、面部二维参数值,并设计出各型号面罩的二维密封曲线。研究结果可用于测量并提取三维密封曲线,为新型高性能供氧面罩的造型设计提供依据。

关键词: 氧气面罩, 设计, 密封, 造型

Abstract:

Defects of oxygen masks being used in our country are in ve stigated and analyzed. Based on the two-dimensional characteristic data distrib utions and anatomical structures of pilots' faces and noses and the requirement s of oxygen-supply physiology, a new typing and sizing method for oxygen masks is founded. The two-dimensional facial and nasal parameter values corresponding to each size mask are determined, and the two-dimensional sealing curve of eac h size mask is designed. The results can be used to measure and determine the th ree-dimensional sealing curve, which is the basis of a new high performance mas k modeling design.

Key words: ox yg en mask, design, seal, mo deling