航空学报 > 2006, Vol. 27 Issue (4): 574-578

基于微型压力传感器阵列的边界层分离点检测方法

陈爽, 马炳和, 苑伟政, 姜澄宇   

  1. 西北工业大学 微/纳米系统实验室, 陕西 西安 710072
  • 收稿日期:2005-01-18 修回日期:2005-07-28 出版日期:2006-08-25 发布日期:2006-08-25

Detection Method of Boundary-Layer Separation Point Based on Micro Pressure Sensor Array

CHEN Shuang, MA Bing-he, YUAN Wei-zheng, JIANG Cheng-yu   

  1. Micro and Nano Electromechanical Systems Laboratory, Northwestern Polytechnical University, Xi'an 710072, China
  • Received:2005-01-18 Revised:2005-07-28 Online:2006-08-25 Published:2006-08-25

摘要: 为了检测边界层的分离点,探讨了根据表面压力分布变化判定分离点的检测方法,提出了基于微机电系统(MEMS)技术和柔性衬底的微型压力传感器阵列的结构方案,可实现在线实时测量,并满足非平面表面的流体测量要求;同时提出了1种分离点检测的判定方法,并通过二维圆柱绕流仿真验证了该方法的正确性和有效性。微型压力传感器阵列的引入,拓宽了边界层分离点检测的解决途径。

关键词: 边界层, 分离点, 表面压力分布, 微型压力传感器阵列, 柔性衬底, 实时在线测量

Abstract: In order to detect the point of boundary layer separation, a measuring method based on the change of surface pressure distribution is discussed, and a design of flexible substrate based micro pressure sensor array is also proposed. This array can achieve real-time online measuring while meeting the measuring requirement of non-planar surface. The paper studies a determination method used to detect separation point and proves its validity through a flow simulation of 2D column. The introduction of micro pressure sensor array expands ways detecting boundary layer separation point.

Key words: boundary layer, separation point, surface pressure distribution, micro pressure sensor array, flexible substrate, real-time online measuring

中图分类号: