飞翼无人机平面外形气动隐身优化设计

doi:10.7527/S1000-6893.2017.721532

流体力学与飞行力学

本期目录 | 过刊浏览 | 高级检索

前一篇 | 后一篇

飞翼无人机平面外形气动隐身优化设计

王荣, 闫溟, 白鹏, 杨云军, 徐国武

中国航天空气动力技术研究院, 北京 100074

收稿日期:2017-05-25 修回日期:2017-06-23 出版日期:2017-11-30 发布日期:2017-06-23
通讯作者: 闫溟 E-mail:yan_ming@aliyun.com

Optimization design of aerodynamics and stealth for a flying-wing UAV planform

WANG Rong, YAN Ming, BAI Peng, YANG Yunjun, XU Guowu

China Academy of Aerospace Aerodynamics, Beijing 100074, China

Received:2017-05-25 Revised:2017-06-23 Online:2017-11-30 Published:2017-06-23

摘要/Abstract

摘要：

对一种双后掠飞翼布局隐身无人机（UAV）平面外形，基于参数化模型和网格自动划分技术，采用气动无黏/黏性数值求解模型和隐身工程评估方法结合单/多目标优化算法，在给定的变量设计空间中完成了气动隐身综合优化设计研究。通过多目标优化给出了布局气动升阻性能相对隐身性能的最优设计边界，指出了外形气动与隐身设计之间存在的冲突关系，即一方性能提升必会使另一方性能降低，不存在双方同时最优的解，飞翼外形设计时需要在气动与隐身间进行权衡折中。计算表明，在飞翼布局外形优化中应采用精度高的黏性气动计算模型。所建立的气动隐身一体化优化设计方法，为飞翼布局无人机外形精细设计奠定了基础。

关键词: 双后掠飞翼, 飞翼布局, 无人机(UAV), 气动隐身, 优化设计

Abstract:

Aerodynamics and stealth design optimization for a cranked flying-wing Unmanned Aerial Vehicle (UAV) planform is conducted based on the parameterized model and automatic meshing technology combined with the uni-and multi-objective optimization algorithm. The aerodynamic performance is predicted by numerically solving inviscid/viscous models, and the stealth performance is estimated through engineering methods. The optimal design front is given by the multi-objective design optimization. The conflict relationship between the aerodynamic and stealthy characteristics is identified, showing that improvement of Radar Cross Section (RCS) performance will lead to decrease of lift to drag ratio. This further indicates that the design of the flying-wing configuration needs consider the tradeoff between aerodynamics and stealth. Calculation shows that the viscous aerodynamic models should be used in the flying-wing design optimization. The design optimization method of aerodynamic-stealthy integration proposed can provide good foundation for the finer design of the flying-wing configuration of the UAV.

Key words: cranked flying-wing, flying-wing configuration, unmanned aerial vehicle (UAV), aerodynamics and stealth, optimization design

中图分类号:

V221

王荣, 闫溟, 白鹏, 杨云军, 徐国武. 飞翼无人机平面外形气动隐身优化设计[J]. 航空学报, 2017, 38(S1): 721532-721532.

WANG Rong, YAN Ming, BAI Peng, YANG Yunjun, XU Guowu. Optimization design of aerodynamics and stealth for a flying-wing UAV planform[J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2017, 38(S1): 721532-721532.

参考文献

[1] 高正红, 夏露, 李天, 等. 飞行器气动与隐身性能一体化优化设计方法研究[J]. 飞机设计, 2003(3): 1-5. GAO Z H, XIA L, LI T, et al. Investigation into collaborative optimization design techniques of aircraft aerodynamics and stealth performances[J]. Aircraft Design, 2003(3): 1-5 (in Chinese).
[2] 焦子涵, 张彬乾, 沈冬. 翼型几何参数对隐身特性的影响研究[J]. 机械科学与技术, 2012, 31(12): 1980-1987. JIAO Z H, ZHANG B Q, SHEN D. Investigation on the effects of geometric parameters on airfoils' stealth characteristics[J]. Mechanical Science and Technology for Aerospace Engineering, 2012, 31(12): 1980-1987(in Chinese).
[3] 李天, 武哲, 李敬. 飞机外形参数的气动与隐身综合优化设计[J]. 北京航空航天大学学报, 2001, 27(1): 76-78. LI T, WU Z, LI J. Integrated aerodynamic-stealth optimal design of aircraft configuration parameters[J]. Journal of Beijing University of Aeronautics and Astronautics, 2001, 27(1): 76-78 (in Chinese).
[4] 何开锋, 钱炜祺, 刘刚. 飞行器气动隐身一体化设计方法研究[J]. 空气动力学学报, 2006, 24(2): 169-174. HE K F, QIAN W Q, LIU G. Aircraft multi-objective design of aerodynamic and stealthy performance[J]. Acta Aerodynamica Sinica, 2006, 24(2): 169-174 (in Chinese).
[5] 鲍君波, 王刚林, 武哲. 飞翼布局气动方案优选和试验验证[J]. 北京航空航天大学学报, 2012, 38(2): 180-184. BAO J B, WANG G L, WU Z. Optimization and experimental verification for aerodynamic scheme of flying-wing[J]. Journal of Beijing University of Aeronautics and Astronautics, 2012, 38(2): 180-184 (in Chinese).
[6] KULFAN B M, BUSSOLETTI J E. "Fundamental" parametric geometry representations for aircraft component shapes: AIAA-2006-6948[R]. Reston, VA: AIAA, 2006.
[7] KULFAN B M. A universal parametric geometry representation method-CST: AIAA-2007-0062[R]. Reston, VA: AIAA, 2007.
[8] 湛岚, 余雄庆, 沈琼. 大型客机概念设计的外形参数化CAD 模型[J]. 计算机工程与设计, 2009, 30(16): 3887-3890. ZHAN L, YU X Q, SHENG Q. Parametric CAD model of aircraft configuration for civil jets conceptual design[J]. Computer Engineering and Design, 2009, 30(16): 3887-3890 (in Chinese).
[9] 李静, 高正红, 黄江涛, 等. 基于CST参数化方法气动优化设计研究[J]. 空气动力学学报, 2012, 30(4): 443-449. LI J, GAO Z H, HUANG J T, et al. Aerodynamic optimization system based on CST technique[J]. Acta Aerodynamica Sinica, 2012, 30(4): 443-449 (in Chinese).
[10] WANG Z J, SRINIVASAN K. Complex dirty geometry handling with an interior-to-boundary grid generation method: AIAA-2001-2538[R]. Reston, VA: AIAA,2001.
[11] 刘周, 周伟江. 适于黏性计算的自适应笛卡儿网格生成及其应用[J]. 航空学报, 2009, 30(12): 2280-2287. LIU Z, ZHOU W J. Adaptive viscous Cartesian grid generation and application[J]. Acta Aeronautica et Astronautica Sinica, 2009, 30(12): 2280-2287 (in Chinese).
[12] 黄明恪, 陈红全. 用非结构直角网格和欧拉方程计算运载火箭绕流[J]. 宇航学报, 2002, 23(5): 66-71. HUANG M K, CHEN H Q. Computation of the flow past launch vehicle usipg unstructured cartesian grid and Euler equations[J]. Journal of Astronautics, 2002, 23(5):66-71 (in Chinese).
[13] ROE P. Approximate Riemann solvers, parameter vectors, and difference schemes[J]. Journal of Computational Physics, 1981,43(2): 357-372.
[14] VAN LEER B. Towards the ultimate conservative difference scheme V: A second order sequel to Godunov's methods[J]. Journal of Computational Physics, 1979, 32(1): 101-136.
[15] VENKATAKRISHNAN V. On the accuracy of limiters and convergence to steady state solutions: AIAA-1993-0880[R]. Reston, VA: AIAA, 1993.
[16] JAMESON A, YOON S. Lower upper implicit schemes with multiple grids for the Euler equations[J]. AIAA Journal, 1987, 25(2): 929-935.
[17] MENTER F R. Two equation eddy viscosity turbulence models for engineering applications[J]. AIAA Journal, 1994, 32(8): 1598-1605.
[18] 昂海松, 舒永泽, 周建江, 等. 复杂目标RCS计算的新方法——曲面像素法[J]. 电子与信息学报, 2001, 23(10):962-969. ANG H S, SHU Y Z, ZHOU J J, et al. A new method for RCS prediction of complex objects—Curved surface pixel method[J]. Journal of Electronics and Information Technology, 2001, 23(10): 962-969 (in Chinese).
[19] 苏抗, 周建江. 有限姿控能力的低RCS微小卫星姿态实时规划[J]. 航空学报, 2010, 31(9): 1841-1848. SU K, ZHOU J J. Real-time attitude planning for low RCS micro-satellites with limited attitude control ability[J]. Acta Aeronautica et Astronautica Sinica,2010,31(9): 1841-1848 (in Chinese).
[20] 唐焕文, 秦学志. 实用最优化方法[M]. 大连: 大连理工大学出版社, 2005. TANG H W, QIN X Z. Practical methods of optimization[M]. Dalian: Dalian University of Technology Press, 2005 (in Chinese).
[21] DEB K. Multi-objective optimization using evolutionary algorithms[M]. Chichester: John Wiley & Sons, 2001.

E-mail：hkxb@buaa.edu.cn

关于我们

期刊社服务

专业学科

封面文章

友情链接

主管单位：中国科学技术协会主办单位：中国航空学会北京航空航天大学

飞翼无人机平面外形气动隐身优化设计

Optimization design of aerodynamics and stealth for a flying-wing UAV planform

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价

[1]	李辉, 龙腾, 孙景亮, 徐广通. 基于自适应视线法的无人机三维航迹跟踪方法[J]. 航空学报, 2022, 43(9): 326105-326105.
[2]	王晨, 杨洋, 沈星, 夏育颖. 用于变体飞行器的波纹板等效强度模型及其优化设计[J]. 航空学报, 2022, 43(6): 526146-526146.
[3]	张冬辉, 张泰华, 崔燕香, 陈臣, 王生. 平流层系留气球气动参数敏感性分析[J]. 航空学报, 2022, 43(5): 125083-125083.
[4]	张桢锴, 贾思嘉, 宋晨, 杨超. 柔性变弯度后缘机翼的风洞试验模型优化设计[J]. 航空学报, 2022, 43(3): 226071-226071.
[5]	陈宪, 陈诚, 黄江涛, 陈其盛, 余龙舟, 钟世东. 腹部襟翼对飞翼布局飞行器起降气动特性的影响[J]. 航空学报, 2022, 43(3): 125028-125028.
[6]	姜丽红, 饶寒月, 兰夏毓, 杨体浩, 耿建中, 白俊强. 混合层流机翼气动设计与综合收益影响[J]. 航空学报, 2022, 43(11): 526791-526791.
[7]	杨体浩, 白俊强, 段卓毅, 史亚云, 邓一菊, 周铸. 喷气式客机层流翼气动设计综述[J]. 航空学报, 2022, 43(11): 527016-527016.
[8]	昌敏, 孙杨, 白俊强, 孟晓轩. 平角旋转机构约束的管射无人机二次折叠翼气动优化设计[J]. 航空学报, 2022, 43(11): 526331-526331.
[9]	冯立好, 魏凌云, 董磊, 王晋军. 飞翼布局飞机耦合运动失稳的主动流动控制[J]. 航空学报, 2022, 43(10): 527353-527353.
[10]	周文硕, 夏露, 王培君, 周琳. 类C-HGB布局锐边化气动隐身优化设计[J]. 航空学报, 2021, 42(S1): 726375-726375.
[11]	高明, 余伟臣, 王杉杉, 王荣闯, 石健将. 太阳能无人机能源系统的多维耦合建模[J]. 航空学报, 2021, 42(7): 224461-224461.
[12]	彭一明, 张钊, 魏小辉, 聂宏, 谢朋朋. 结构参数对拦阻钩碰撞反弹动力学影响分析[J]. 航空学报, 2021, 42(7): 224406-224406.
[13]	胡莘婷, 吴宇. 面向城市飞行安全的无人机离散型多路径规划方法[J]. 航空学报, 2021, 42(6): 324383-324383.
[14]	张宏伟, 达新宇, 胡航, 倪磊, 潘钰. 基于多机协作的认知无人机网络能效联合优化[J]. 航空学报, 2021, 42(6): 324548-324548.
[15]	刘志涛, 蒋永, 聂博文, 岑飞, 徐圣. 弯折翼尖对飞翼布局飞机气动特性影响[J]. 航空学报, 2021, 42(6): 124179-124179.