航空学报 > 1994, Vol. 15 Issue (4): 410-415

考虑剪力效应的复合材料层合曲板在侧压作用下的非线性动力稳定性

杨嘉陵, 张志民, 张耀, 高镇同   

  1. 北京航空航天大学固体力学研究所,北京,100083
  • 收稿日期:1992-05-13 修回日期:1993-03-02 出版日期:1994-04-25 发布日期:1994-04-25

NONLINEAR DYNAMIC STABILITY ANALYSIS OF COMPOSITE LAMINATED CURVED PANELS INCLUDING SHEAR DEFORMATION UNDER LATERAL PRESSURE

Yang Jialing, Zhang Zhimin, Zhang Yao, Gao Zhentong   

  1. The Solid Mechanics Research Centre,Beijing University of Aeronautics and Astronautics,Beijing,100083
  • Received:1992-05-13 Revised:1993-03-02 Online:1994-04-25 Published:1994-04-25

摘要: 以无穷长的复合材料层合曲板受阶跃均布侧压作用的非线性动力稳定性问题为研究内容,侧重分析了剪力效应以及不同铺层方向的各向异性效应对动临界载荷参数的影响。指出:①对于抗剪能力较弱的复合材料曲板,横向剪力的影响将显著降低临界载菏的值,因而不能忽略它的效应,否则,所得到的临界值将毫无意义;②纤维的方向对临界载荷的影响非常大,不同的铺层方向可能导致临界载荷参数值相差数倍。

关键词: 层压板, 剪力, 非线性, 动稳定性

Abstract: This paper presents a study of the nonlinear dynamic stability of infinitely long laminated curved panels suUected to a total-area uniform step loading. Emphases are on the analysis for the transverse shear force and anisotropic effects due to ply-direction of fabric on the dynamic critical load parameter.It is seen that(1) the transverse shear force plays an important role in the reduction of critical load for a very weak transverse shear resistant capability of com- posite laminated curved panel; (2)the ply-directions of the fabric will significantly influence the critical load because its values are found to be very different even to several times for the different ply-angles

Key words: laminate, transverse shear force, nonlinearity, dynamic stability

中图分类号: