基于超声声速法的镍基单晶材料晶体取向评价

doi:10.7527/S1000-6893.2021.25431

材料工程与机械制造

本期目录 | 过刊浏览 | 高级检索

前一篇 | 后一篇

基于超声声速法的镍基单晶材料晶体取向评价

张晨昕¹, 姚松¹, 李雄兵¹, 杨洋², 韩军³

1. 中南大学交通运输工程学院, 长沙 410075;
2. 广东工业大学机电工程学院, 广州 510006;
3. 中国科学院泉州装备制造研究所, 泉州 362200

收稿日期:2021-03-01 修回日期:2021-05-11 发布日期:2021-05-10
通讯作者: 李雄兵,E-mail:lixb213@csu.edu.cn E-mail:lixb213@csu.edu.cn
基金资助:
国家自然科学基金(92060111,51801199);中南大学中央高校基本科研业务费专项资金(502221908)

Measuring crystallographic orientation of Ni-based single-crystal materials using ultrasonic velocity method

ZHANG Chenxin¹, YAO Song¹, LI Xiongbing¹, YANG Yang², HAN Jun³

1. School of Traffic and Transportation Engineering, Central South University, Changsha 410075, China;
2. School of Electromechanical Engineering, Guangdong University of Technology, Guangzhou 510006, China;
3. Quanzhou Institute of Equipment Manufacturing, Chinese Academy of Sciences, Quanzhou 362200, China

Received:2021-03-01 Revised:2021-05-11 Published:2021-05-10
Supported by:
National Natural Science Foundation of China (92060111,51801199); Fundamental Research Funds for the Central Universities of Central South University (502221908)

摘要/Abstract

摘要： 镍基高温合金单晶材料具有优异的综合力学性能,单晶叶片等构件中的晶体取向偏离是其主要缺陷之一,针对镍基单晶材料晶体取向开展了超声无损评价方法研究,利用声波在立方各向异性材料中的传播性质,以线性超声相控阵作为接收端测量各向异性材料中与方向相关的折射场,构造了基于Wigner-D函数的空间声速曲面重构算法,进一步建立了晶体取向的声速法评价模型,可一次性评价完整的3个欧拉角。为验证方法有效性,制备了具有不同晶体取向的镍基单晶样品进行超声实验测量和样品的体平均取向评价,并与电子背散射衍射(EBSD)法进行了结果对照。结果表明,本文方法评价误差率在3.69%以内。

关键词: 超声, 声速, 镍基单晶, 晶体取向, Wigner-D

Abstract: The single-crystal material of the Ni-based superalloy has excellent comprehensive mechanical properties. The deviation of crystal orientation is one of the main defects in single-crystal blades. In this work, ultrasonic wave velocities are used to evaluate the crystallographic orientation of the Ni single-crystal material. The orientation-dependent refracted field is measured using a linear ultrasonic phased array transducer placed beneath the sample at three in-plane orientations. The refracted field is connected to the crystallographic orientation by reconstructing the velocity surface as a function of Wigner-D function. The proposed method can evaluate three complete Euler angles at one time. To verify the effectiveness of the method, the Ni-based single-crystal samples with different crystal orientations were prepared for ultrasonic measurement and volume average orientation evaluation. A comparison with the Electron Backscattered Diffraction (EBSD) measurements shows that the evaluation error rate of the proposed method is within 3.69%.

Key words: ultrasound, sound velocity, Ni-based single-crystal, crystallographic orientation, Wigner-D functionhttp

中图分类号:

V252
TB559

张晨昕, 姚松, 李雄兵, 杨洋, 韩军. 基于超声声速法的镍基单晶材料晶体取向评价[J]. 航空学报, 2022, 43(7): 425431-425431.

ZHANG Chenxin, YAO Song, LI Xiongbing, YANG Yang, HAN Jun. Measuring crystallographic orientation of Ni-based single-crystal materials using ultrasonic velocity method[J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2022, 43(7): 425431-425431.

参考文献

[1] LETHBRIDGE Z A D, WALTON R I, MARMIER A S H, et al. Elastic anisotropy and extreme Poisson's ratios in single crystals[J]. Acta Materialia, 2010, 58(19):6444-6451.
[2] 李茜,张福禄,赵子华.镍基单晶/柱晶高温合金超高周疲劳研究进展[J].航空学报, 2021, 42(5):524340. LI Q, ZHANG F L, ZHAO Z H. Very high cycle fatigue of nickel-based single-crystal and directionally solidified superalloys:Review[J]. Acta Aeronautica et Astronautica Sinica, 2021, 42(5):524340(in Chinese).
[3] 张军,黄太文,刘林,等.单晶高温合金凝固特性与典型凝固缺陷研究[J].金属学报, 2015, 51(10):1163-1178. ZHANG J, HUANG T W, LIU L, et al. Advances in solidification characteristics and typical casting defects in nickel-based single crystal superalloys[J]. Acta Metallurgica Sinica, 2015, 51(10):1163-1178(in Chinese).
[4] 赵新宝,刘林,杨初斌,等.镍基单晶高温合金凝固缺陷研究进展[J].材料工程, 2012, 40(1):93-98. ZHAO X B, LIU L, YANG C B, et al. Advance in research of casting defects of directionally solidified nickel-based single superalloys[J]. Journal of Materials Engineering, 2012, 40(1):93-98(in Chinese).
[5] 荆甫雷,王荣桥,胡殿印,等.单晶高温疲劳损伤参量的选取与寿命建模[J].航空学报, 2016, 37(9):2749-2756. JING F L, WANG R Q, HU D Y, et al. Damage parameter determination and life modeling for high temperature fatigue of single crystals[J]. Acta Aeronautica et Astronautica Sinica, 2016, 37(9):2749-2756(in Chinese).
[6] 温志勋,岳珠峰,于庆民,等.镍基单晶合金CT试样裂纹尖端应力结构及晶体滑移特性[J].航空学报, 2007, 28(4):964-970. WEN Z X, YUE Z F, YU Q M, et al. Characteristics of crack-tip stress structure and crystal slipping in nickel-base singlesupperalloy CT specimens[J]. Acta Aeronautica et Astronautica Sinica, 2007, 28(4):964-970(in Chinese).
[7] 岳珠峰,于庆民,温志勋.镍基单晶涡轮叶片结构强度设计[M].北京:科学出版社, 2008. YUE Z F, YU Q M, WEN Z X. Structural strength design of nickel based single crystal turbine blade[M]. Beijing:Science Press, 2008(in Chinese).
[8] 中国航空工业总公司.单晶叶片晶体取向的测定X射线背射劳厄照相法:HB 6742-1993[S].北京:中国标准出版社, 1994. Aviation Industry Corporation of China. Determination ofcrystal orientation of single crystal blade by X-ray backscatter Laue photography:HB 6742-1993[S]. Beijing:Standards Press of China, 1994(in Chinese).
[9] ENGLER O, RANDLE V. Introduction to texture analysis[M]. Boca Raton:CRC Press, 2010:64-66, 280-292.
[10] BACON G E. Neutron diffraction[M]. 3rd ed. Oxford:Clarendon Press, 1975.
[11] ABA-PEREA P E, PIRLING T, WITHERS P J, et al. Determination of the high temperature elastic properties and diffraction elastic constants of Ni-base superalloys[J]. Materials&Design, 2016, 89:856-863.
[12] 孙侠生,肖迎春.飞机结构健康监测技术的机遇与挑战[J].航空学报, 2014, 35(12):3199-3212. SUN X S, XIAO Y C. Opportunities and challenges of aircraft structural health monitoring[J]. Acta Aeronautica et Astronautica Sinica, 2014, 35(12):3199-3212(in Chinese).
[13] SCHMERR L W. Fundamentals of ultrasonic nondestructive evaluation[M]. Cham:Springer International Publishing, 2016:79-84.
[14] LI Y, THOMPSON R B. Relations between elastic constants C_ij and texture parameters for hexagonal materials[J]. Journal of Applied Physics, 1990, 67(5):2663-2665.
[15] MARKHAM M F. Measurement of the elastic constants of fibre composites by ultrasonics[J]. Composites, 1970, 1(3):145-149.
[16] ROKHLIN S I, WANG W. Double through-transmission bulk wave method for ultrasonic phase velocity measurement and determination of elastic constants of composite materials[J]. The Journal of the Acoustical Society of America, 1992, 91(6):3303-3312.
[17] ARISTÉGUI C, BASTE S. Optimal determination of the material symmetry axes and associated elasticity tensor from ultrasonic velocity data[J]. The Journal of the Acoustical Society of America, 1997, 102(3):1503-1521.
[18] REED R C. The superalloys:Fundamentals and applications[M]. Cambridge:Cambridge University Press, 2006:121-139.
[19] LAN B, LOWE M J S, DUNNE F P E. A spherical harmonic approach for the determination of HCP texture from ultrasound:A solution to the inverse problem[J]. Journal of the Mechanics and Physics of Solids, 2015, 83:179-198.
[20] ZHANG J M, ZHANG Y, XU K W, et al. Young's modulus surface and Poisson's ratio curve for cubic metals[J]. Journal of Physics and Chemistry of Solids, 2007, 68(4):503-510.
[21] NOLZE G. Euler angles and crystal symmetry[J]. Crystal Research and Technology, 2015, 50(2):188-201.
[22] ROE R J. Description of crystallite orientation in polycrystalline materials. III. General solution to pole figure inversion[J]. Journal of Applied Physics, 1965, 36(6):2024-2031.
[23] LAN B, LOWE M J S, DUNNE F P E. A generalized spherical harmonic deconvolution to obtain texture of cubic materials from ultrasonic wave speed[J]. Journal of the Mechanics and Physics of Solids, 2015, 83:221-242.
[24] CLAY K, MINGARD K, MORRELL R, et al. R value measurement issues for grain boundaries in nickel single crystal castings[J]. Materials Science and Technology, 2010, 26(7):781-786.
[25] MACKENZIE J K. Second paper on statistics associated with the random disorientation of cubes[J]. Biometrika, 1958, 45(1-2):229-240.

E-mail：hkxb@buaa.edu.cn

关于我们

期刊社服务

专业学科

封面文章

友情链接

主管单位：中国科学技术协会主办单位：中国航空学会北京航空航天大学

基于超声声速法的镍基单晶材料晶体取向评价

Measuring crystallographic orientation of Ni-based single-crystal materials using ultrasonic velocity method

RichHTML

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价

[1]	乔竑玮, 梁剑寒, 张林, 孙明波, 陈玉俏. 超声速燃烧中的概率密度函数方法研究进展[J]. 航空学报, 2024, 45(8): 28802-028802.
[2]	郑建成, 曲智国, 谭贤四, 李志淮, 朱刚, 李陆军, 刘伟. 基于责任区划分的雷达网探测高超声速目标资源管理[J]. 航空学报, 2024, 45(8): 329022-329022.
[3]	戴今钊, 陈海昕. 流场波系引导的三维消波翼优化设计方法[J]. 航空学报, 2024, 45(6): 628942-628942.
[4]	李军府, 陈晴, 王伟, 韩忠华, 谭玉婷, 丁玉临, 谢露, 乔建领, 宋科, 艾俊强. 一种先进超声速民机低声爆高效气动布局设计[J]. 航空学报, 2024, 45(6): 629613-629613.
[5]	刘小勇, 王明福, 刘建文, 任鑫, 张轩. 超燃冲压发动机研究回顾与展望[J]. 航空学报, 2024, 45(5): 529878-529878.
[6]	杨博, 于贺, 樊子辰. 微观能量分析气动光学效应时变误差的方法[J]. 航空学报, 2024, 45(4): 128703-128703.
[7]	纪鉴恒, 蔡尊, 王泰宇, 孙明波, 王振国. 宽速域超燃冲压发动机流动燃烧过程研究进展[J]. 航空学报, 2024, 45(3): 28696-028696.
[8]	王一凡, 陈浩颖, 张海波. 面向巡航任务的自适应循环发动机进/发匹配[J]. 航空学报, 2024, 45(2): 128637-128637.
[9]	李学良, 李创创, 苏伟, 吴杰. 分布式粗糙元对高超声速边界层不稳定性的影响试验[J]. 航空学报, 2024, 45(2): 128627-128627.
[10]	赖江, 范召林, 王乾, 董思卫, 童福林, 袁先旭. 高超声速有攻角锥裙直接数值模拟[J]. 航空学报, 2024, 45(2): 128610-128610.
[11]	应岳峰, 陈琪昊, 王卫东, 毛欣宇. 焊丝超声振动对铝合金熔化极气体保护焊缝成形及气孔的影响[J]. 航空学报, 2024, 45(2): 428711-428711.
[12]	熊有德, 李创创, 张振辉, 吴杰. 高超声速风洞自由来流扰动热线测量技术[J]. 航空学报, 2024, 45(10): 129042-129042.
[13]	倪炜霖, 王永海, 徐聪, 赤丰华, 梁海朝. 基于强化学习的高超飞行器协同博弈制导方法[J]. 航空学报, 2023, 44(S2): 729400-729400.
[14]	于哲峰, 梁世昌, 石卫波, 田得阳, 石安华, 廖东骏, 杨鹰. 类HTV⁃2飞行器光电特性的分析评估技术[J]. 航空学报, 2023, 44(S2): 729465-729465.
[15]	张鸿健, 张晏鑫, 熊建军, 赵照, 冉林, 易贤. 冰层中相控阵超声波束传播特性的数值模拟[J]. 航空学报, 2023, 44(S2): 729289-729289.