| [1] van Wie D M, Kwok F T, Walsh R F. Starting characteristics of supersonic inlets. AIAA-1996-2914, 1996.[2] Bouchez M, Falempin F. Airbreathing space launcher interest of a fully variable geometry propulsion system status. AIAA-1999-2376, 1999.[3] Huebner L D, Rock K E, Ruf E G, et al. Hyper-X flight engine ground testing for X-43 flight risk reduction. AIAA-2001-1809, 2001.[4] Falempin F, Wendling E, Goldfeld M, et al. Experimental investigation of starting process for a variable geometry air inlet operating from Mach 2 to Mach 8. AIAA-2006-4513, 2006.[5] Zhang H J, Liang D W, Guo R W. Study of flow characteristics for a variable geometry inlet on combined engine. Journal of Aerospace Power, 2009, 24(10): 2201-2207. (in Chinese) 张华军, 梁德旺, 郭荣伟. 一种组合发动机变几何进气道流场特性研究. 航空动力学报, 2009, 24(10): 2201-2207.[6] Liu X W, He G Q, Liu P J. Investigation of a RBCC 2D variable-geometry inlet scheme. Journal of Solid Rocket Technology, 2010, 33(4): 409-418. (in Chinese) 刘晓伟, 何国强, 刘佩进. 一种RBCC二元进气道变几何方案研究. 固体火箭技术, 2010, 33(4): 409-418.[7] Mrozinski D P, Hayes J R. Numerical and experimental analysis of a hypersonic variable geometry inlet. AIAA-1999-899, 1999.[8] Jin Z G, Zhang K Y. Concept of a varied geometry scramjet inlet with rotatable cowl. Journal of Propulsion Technology, 2008, 29(1): 43-48. (in Chinese) 金志光, 张堃元. 高超侧压式进气道简单唇口调节方案设计. 推进技术, 2008, 29(1): 43-48.[9] Wu J Q, Zhang K Y. Dynamic investigation on hypersonic sidewall compression inlets with cowl valve during the process of transition. Journal of Aerospace Power, 2009, 24(2): 296-301. (in Chinese) 吴俊琦, 张堃元.带唇口封气活门的高超侧压进气道过渡态工况气动性能. 航空动力学报, 2009, 24(2): 296-301.[10] Pan J, Zhang K Y. Self-starting characteristics for sidewall-compression inlet with variable internal contraction ratio. Journal of Propulsion Technology, 2007, 28(3): 278-281. (in Chinese) 潘瑾, 张堃元. 可变内收缩比侧压式进气道自起动性能. 推进技术, 2007, 28(3): 278-281.[11] Pan J, Zhang K Y. Study on back pressure and self-starting characteristics for sidewall-compression inlet with variable internal contraction ratio by moving cowl. Journal of Aerospace Power, 2009, 24(1): 104-109. (in Chinese) 潘瑾, 张堃元. 移动唇口变收缩比侧压式进气道反压特性和自起动性能. 航空动力学报, 2009, 24(1): 104-109.[12] Chen Q H, Zhang K Y. The primary investigation on variable throat and top wall of sidewall compression inlet. Nanjing: College of Energy and Power Engineering, Nanjing University of Aeronautics and Astronautics, 2006.(in Chinese) 陈秋华, 张堃元. 喉道顶板可调侧压式进气道初步研究. 南京: 南京航空航天大学能源与动力学院, 2006.[13] Wang Y, Fan X Q, Liang J H, et al. Experimental investigation on the starting characteristics of a hypersonic inlet with moving entrance door. Journal of Aerospace Power, 2008, 23(6): 1014-1018. (in Chinese) 王翼, 范晓墙, 梁剑寒, 等. 开启式高超声速进气道启动性能试验.航空动力学报, 2008, 23(6): 1014-1018.[14] Jin Z G, Zhang K Y. A variable geometry scramjet inlet with a translating cowl operating in a large Mach number range. Journal of Astronautics, 2010, 31(5): 1503-1510. (in Chinese) 金志光, 张堃元.宽马赫数范围高超声速进气道伸缩唇口简单变几何方案研究.宇航学报, 2010, 31(5): 1503-1510.[15] Jin Z G, Zhang K Y. Investigation of a variable geometry scramjet inlet with a rotating cowl operating in a large Mach number range. Journal of Aerospace Power, 2010, 25(7): 1553-1560.(in Chinese) 金志光, 张堃元. 宽马赫数范围高超声速进气道转动唇口变几何方案研究. 航空动力学报, 2010, 25(7): 1553-1560. |
CJA
