导航
Archive
Effect of thermal radiation on thermal evaluation of hypersonic vehicle radomes
ZHANG Xiaochen, XIA Xinlin, LIN Chaoguang, WANG Zhenfeng, TAN Heping
doi: 10.7527/S1000-6893.2017.120916
2017, (10): 120916-120916.
PDF [ 5100 K ]( 782 ) HTML
Rotor noise reduction mechanism and parameter analysis of HHC method
CHEN Siyu, ZHAO Qijun, NI Tongbing, ZHU Zheng
doi: 10.7527/S1000-6893.2017.121000
2017, (10): 121000-121000.
PDF [ 4354 K ]( 468 ) HTML
Direct force measurement tests with hypersonic ducted model
WANG Zejiang, SONG Wenping, ZENG Xuejun, YANG Bo, SUN Peng, TANG Xiaowei
doi: 10.7527/S1000-6893.2017.121100
2017, (10): 121100-121100.
PDF [ 2423 K ]( 501 ) HTML
Approximate analytical analysis for phugoid characteristic of reentry vehicles and its applications
GU Jie, ZHANG Shuguang, YANG Fan, WANG Baoyin
doi: 10.7527/S1000-6893.2017.121174
2017, (10): 121174-121174.
PDF [ 3572 K ]( 505 ) HTML
Numerical simulation of aerodynamic characteristics of CRM-WB configuration with support system and wing deformation
WANG Yuntao, SUN Yan, MENG Dehong, ZHANG Shujun, YANG Xiaochuan
doi: 10.7527/S1000-6893.2017.121202
2017, (10): 121202-121202.
PDF [ 2815 K ]( 466 ) HTML
Low speed wind tunnel free-flight test of powered sub-scale aircraft
CEN Fei, NIE Bowen, LIU Zhitao, SUN Haisheng, LI Qing
doi: 10.7527/S1000-6893.2017.121214
2017, (10): 121214-121214.
PDF [ 3557 K ]( 718 ) HTML
Propagation property of flame and pressure wave in rotating detonation engine
XU Can, MA Hu, LI Jian, DENG Li, YU Ling
doi: 10.7527/S1000-6893.2017.121226
2017, (10): 121226-121226.
PDF [ 3032 K ]( 384 ) HTML
Numerical study of supercooling characteristics of droplet in icing wind tunnel
GUO Xiangdong, WANG Zixu, LI Ming, XIAO Chunhua
doi: 10.7527/S1000-6893.2017.121254
2017, (10): 121254-121254.
PDF [ 2857 K ]( 408 ) HTML
Delay phenomenon of boundary layer transition according to heating flux identified from flight test
GUO Yijun, ZHOU Yu, XIAO Hanshan, ZHOU Shuguang, QIU Bo, ZENG Lei, LIU Xiao
doi: 10.7527/S1000-6893.2017.121255
2017, (10): 121255-121255.
PDF [ 3667 K ]( 333 ) HTML
Test methods for determining surface catalytic properties of thermal protection materials in high enthalpy chemical non-equilibrium flows
LIU Liping, WANG Guolin, WANG Yiguang, MA Haojun, LUO Jie, ZHANG Jun
doi: 10.7527/S1000-6893.2017.121317
2017, (10): 121317-121317.
PDF [ 2831 K ]( 392 ) HTML
Global sensitivity analysis method for multivariate output based on fuzzy Hausdorff distance
FAN Chongqing, LYU Zhenzhou
doi: 10.7527/S1000-6893.2017.120870
2017, (10): 220870-220870.
PDF [ 2827 K ]( 464 ) HTML
Preliminary design method for miniature electric-powered vertical take-off and landing unmanned airial vehicle and effects of special parameters
TANG Wei, SONG Bifeng, CAO Yu, YANG Wenqing
doi: 10.7527/S1000-6893.2017.220972
2017, (10): 220972-220972.
PDF [ 3780 K ]( 851 ) HTML
Lightweight design method for continuum structure under vibration using multiphase materials
LONG Kai, GU Xianguang, WANG Xuan
doi: 10.7527/S1000-6893.2017.221022
2017, (10): 221022-221022.
PDF [ 3090 K ]( 300 ) HTML
Vibration and acoustic radiation characteristics analysis of composite laminated plate in hygrothermal environments
ZHAO Tian, YANG Zhichun, TIAN Wei, CHEN Zhaolin
doi: 10.7527/S1000-6893.2017.221038
2017, (10): 221038-221038.
PDF [ 3373 K ]( 480 ) HTML
Failure risk assessment method of civil aircraft based on Monte Carlo method
GUO Yuanyuan, SUN Youchao, LI Longbiao
doi: 10.7527/S1000-6893.2017.221126
2017, (10): 221126-221126.
PDF [ 2774 K ]( 538 ) HTML
Load separation based direct calibration method for estimating J-resistance curves
WU Yuanjun, BAO Chen, HE Guangwei, CAI Lixun
doi: 10.7527/S1000-6893.2017.221128
2017, (10): 221128-221128.
PDF [ 2269 K ]( 295 ) HTML
Size parameters identification and rotation project design for single-axis rotary SINS
GUO Qi, ZHOU Zhaofa, SUN Lijiang, XU Zihao, CHEN He
doi: 10.7527/S1000-6893.2016.320841
2017, (10): 320841-320841.
PDF [ 2978 K ]( 556 ) HTML
Integrated guidance and control design considering input saturation
WANG Songyan, SUN Xiangyu, YANG Shengjiang, CHAO Tao
doi: 10.7527/S1000-6893.2017.320897
2017, (10): 320897-320897.
PDF [ 3289 K ]( 600 ) HTML
A robust scene matching method for mountainous regions with illumination variation
WANG Huaxia, CHENG Yongmei, LIU Nan
doi: 10.7527/S1000-6893.2017.321101
2017, (10): 321101-321101.
PDF [ 4567 K ]( 468 ) HTML
Fault-tolerant translational control for spacecraft formation flying with collision avoidance requirement
MA Guangfu, DONG Hongyang, HU Qinglei
doi: 10.7527/S1000-6893.2017.321129
2017, (10): 321129-321129.
PDF [ 3287 K ]( 648 ) HTML
Intelligent decision-making in air combat maneuvering based on heuristic reinforcement learning
ZUO Jialiang, YANG Rennong, ZHANG Ying, LI Zhonglin, WU Meng
doi: 10.7527/S1000-6893.2017.321168
2017, (10): 321168-321168.
PDF [ 4282 K ]( 1099 ) HTML
Abrasive flow machining of additively manufactured metal grilling parts
GAO Hang, LI Shichong, FU Youzhi, WEI Haibo, PENG Can, WANG Xuanping
doi: 10.7527/S1000-6893.2017.421210
2017, (10): 421210-421210.
PDF [ 3179 K ]( 594 ) HTML
Influence of different warp knitted fabrics on processability and permeability of preform
WU Kaiwen, YANG Jin, LI Long, ZHAO Xiaoran, LIU Gang, LI Shaoliang, ZHAO Yan
doi: 10.7527/S1000-6893.2017.421238
2017, (10): 421238-421238.
PDF [ 3880 K ]( 400 ) HTML
Academic Quality
Download Ranking