导航

Acta Aeronautica et Astronautica Sinica ›› 2024, Vol. 45 ›› Issue (6): 629613-629613.doi: 10.7527/S1000-6893.2023.29613

• Special Topic: New Conceptual Aerodynamic Layout Design for Aircraft • Previous Articles    

Design of low sonic boom high efficiency layout for advanced supersonic civil aircraft

Junfu LI1,2, Qing CHEN1,3,4, Wei WANG2, Zhonghua HAN1,3,4(), Yuting TAN2, Yulin DING1,3,4, Lu XIE2, Jianling QIAO1,3,4, Ke SONG1,3,4, Junqiang AI2   

  1. 1.School of Aeronautics,Northwestern Polytechnical University,Xi’an 710072,China
    2.AVIC The First Aircraft Institute,Xi’an 710089,China
    3.Key Laboratory of Science and Technology on Aerodynamic Design and Research,Northwestern Polytechnical University,Xi’an 710072,China
    4.Institute of Aerodynamic and Multidisciplinary Design Optimization,School of Aeronautics,Northwestern Polytechnical University,Xi’an 710072,China
  • Received:2023-09-19 Revised:2023-10-07 Accepted:2023-10-24 Online:2023-11-02 Published:2023-11-01
  • Contact: Zhonghua HAN E-mail:hanzh@nwpu.edu.cn
  • Supported by:
    National Level Project

Abstract:

The design of low sonic boom high efficiency aerodynamic layout is one of the most important key technologies for supersonic civil aircraft. Based on the inverse design method of sonic boom minimization theory, this paper proposes an advanced supersonic civil aircraft low sonic boom aerodynamic layout using the aft-body design based on wave system beneficial interference and the mixed credibility anti-design method based on the parameterized near-field overpressure signal, and analyzes the effect of each step of sonic boom reduction and the whole sonic boom blanket. Then, the effects of flying altitude, Mach number and wing swept angle on the sonic boom loudness of the aerodynamic layout are studied. Finally, the effects of flying altitude and Mach number on the aerodynamic characteristics of the layout are examined using CFD numerical simulation method. The results show that the anti-design method based on the sonic boom minimization theory can reduce the ground perceived loudness in decibel by 6.54 PLdB, while the aft-body design method based on the wave system beneficial interference and the hybrid reliability inverse design method of parameterized near-field overpressure signal can further reduce it by 0.97 PLdB and 4.04 PLdB, respectively. Reasonable match of the flying height and Mach number can effectively reduce the ground perceived loudness in decibel. Reasonable selection of the flying height and cruise Mach number can effectively improve cruise efficiency. This study has certain engineering value for both aerodynamic layout design and aircraft conceptual design of supersonic civil aircraft.

Key words: supersonic civil aircraft, low sonic boom, aerodynamic layout, ground sonic boom loudness, cruise efficiency, Mach number, flight altitude, wing swept angle

CLC Number: