基于缺陷敏感度的加筋短板承载能力

doi:10.7527/S1000-6893.2020.23832

Abstract

Abstract: Stiffened short plates are the basic components of aircraft structure because of their high specific strength. Their design method is based on the traditional Euler column buckling theory and Timoshenko plate shell elastic stability theory. However, the failure load cannot be well predicated due to the assumption and simplification in the design. The load-carrying capacity of the stiffened short plate is simulated by the method of GMNIA (Geometric and Material Nonlinear Analysis with Imperfections), and the results are in good agreement with the experimental data. Based on GMNIA, the sensitivity analysis of different types of geometric imperfections in the load-carrying capacity of the stiffened short plate is carried out. The influence of initial bending, initial eccentricity and initial deformation on the load-carrying capacity of the stiffened short plate is studied. The calculation formulas of the initial bending and initial deformation imperfections of the stiffened short plate are given, providing technical support for the finite element simulation of the failure process and prediction of the load-carrying capacity of the stiffened short plate. Furthermore, the allowable design values of the bearing capacity of stiffened short plates under initial bending imperfection are presented, and suggestions of improving the ultimate bearing capacity in the design by controlling the manufacturing tolerance are put forward, exhibiting engineering application significance and practical value.

Key words: stiffened short plate, initial geometrical imperfections, sensitivity, load bearing capacity, design suggestion

CLC Number:

V224

LIU Cun, ZHAO Dongqiang. Load-carrying capacity of stiffened short plates based on imperfection sensitivity[J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2020, 41(10): 223832-223832.

References

[1] CALLADINE C R. Understanding imperfection-sensitivity in the buckling of thin-walled shells[J].Thin-Walled Structures, 1995, 23(1):215-235.
[2] 郝鹏,王博,李刚,等. 基于缺陷敏感性分析的加筋圆柱壳结构设计[J].应用力学学报, 2013, 30(3):344-349. HAO P, WANG B, LI G, et al. Structural design of stiffened shells based on imperfection sensitivity analysis[J].Chinese Journal of Applied Mechanics, 2013, 30(3):344-349(in Chinese).
[3] CAMPBELL J,HETEY L,VIGNJEVIC R. Nonlinear idealization error analysis of a metallic stiffened panel loaded in compression[J].Thin-Walled Structures, 2012, 54:44-53.
[4] BERNARD E S,COLEMAN R,BRIDGE R Q. Measurement and assessment of geometrical imperfections in thin-walled panels[J].Thin-Walled Structures, 1999, 33:103-126.
[5] LANZI L A. A numerical and experimental investigation on composite stiffened panels into post-buckling[J].Thin-Walled Structures, 2004, 42(12):1645-1664.
[6] HOUSTON G, QUINN D, MYRPHY A, et al. Impact of geometric imperfections on metallic stiffened panels with skin bay buckling containment features[C]//53th AIAA/ASME/ASCE/AHS/ASC Structure, Structure Dynamics, and Materials Conference. Reston:AIAA, 2012.
[7] PAULO R M F, TEIXEIRA-DIAS F, VALENTE R A F. Numerical simulation of aluminum stiffened panels subjected axial compression:Sensitivity analyses to initial geometrical imperfections and material properties[J].Thin-Walled Structures, 2013, 62(1):65-74.
[8] XU M C, SOARES C G. Assessment of the ultimate strength of narrow stiffened panel tests specimens[J].Thin-Walled Structures, 2012, 55:11-21.
[9] 刘存,张磊,杨卫平. 舰载机壁板剪切后屈曲承载能力预测与试验验证[J].航空学报, 2019, 40(4):622300. LIU C, ZAHNG L, YANG W P. Post-buckling study and test verification of carrier-based aircraft wing stiffened panels under shear load[J].Acta Aeronautica et Astronautica Sinica, 2019, 40(4):622300(in Chinese).
[10] HILBURGER M W, NEMETH M P, STARNES J H. Shell buckling design criteria based on manufacturing imperfection signatures[J].AIAA Journal, 2006, 44(3):654-663.
[11] HILBURGER M W, STARNES J H J. Effects of imperfections on the buckling response of compression-loaded composite shells[C]//41 st AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference. Reston:AIAA, 2000.
[12] RIGO P, SARGHIUTA R, ESTEFEN S, et al. Sensitivity analysis on ultimate strength of aluminum stiffened panels[J].Marine Structures, 2003,16:437-468.
[13] COUTO C, VILA R P. Numerical investigation on the influence of imperfections in the local buckling of thin-walled I-shaped sections[J].Thin-Walled Structures, 2019, 135:89-108.
[14] SALTELLI A, RATTO M, TARANTOLA S, et al. Sensitivity analysis practices:Strategies for model-based inference[J].Reliability Engineering and System Safety, 2006, 91(10-11):1109-1125.
[15] 罗鹏程,傅攀峰. 武器装备敏感性分析方法综述[J].计算机工程与设计, 2008, 29(21):5546-5549. LUO P C, FU P F. Review on weapons and equipment sensitivity analysis methods[J].Computer Engineering and Design, 2008, 29(21):5546-5549(in Chinese).
[16] SALTELLI A, MARIVOET J. Non-parametric statistics in sensitivity analysis for model output:A comparison of selected techniques[J].Reliability Engineering System Safety, 1990, 28(2):229-253.
[17] HELTON J C, DAVIS F J. Survey of sampling-based methods for uncertainty and sensitivity analysis[J].Reliability Engineering System Safety, 2006, 91(10):1175-1209.
[18] SOBOI I M. Global sensitivity indices for nonlinear mathematical models and their Monte Carlo estimates[J].Mathematics and Computers in Simulation, 2001, 55(1-3):271-280.
[19] BORGONOVO E. A new uncertainty importance measure[J].Reliability Engineering System Safety, 2007, 92(6):771-784.
[20] CUI L J, LU Z Z, ZHAO X P. Moment-independent importance measure of basic random variable and its probability density evolution solution[J].Science China Technological Sciences, 2010, 53(4):1138-1145.
[21] LI L Y, LU Z Z, FENG J, et al. Moment-independent importance measure of basic variable and its state dependent parameter solution[J].Structural Safety, 2012, 38:40-47.
[22] RICE R C, JACKSON J L, BAKUCKAS J, et al. Metallic materials properties development and standardization[M]. Washington,D. C.:Federal Aviation Administration, 2003:3-429.
[23] LANZI L A, GIAVOTTO V O. Post-buckling optimization of composite stiffened panels computations and experiments[J].Composite Structures, 2006,73:208-220.
[24] ABRAMOVICH H, BISAGNI C, CORDISCO P. Post-buckling test simulation of a stiffened composite panel[C]//48th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference. Reston:AIAA, 2007.
[25] ZHANG S M, KHAN I. Buckling and ultimate capability of plates and stiffened panels in axial compression[J].Marine Structures, 2009, 22(4):791-808.
[26] XU M C, SOARES C G. Assessment of the ultimate strength of narrow stiffened panel tests specimens[J].Thin-Walled Structures, 2012, 55:11-21.
[27] LI Y B, PAN Q, HUANG M H, et al. Set-based parametric modeling, buckling and ultimate strength estimation of stiffened ship structures[J].Journal of Central South University, 2019, 26(7):1958-1975.
[28] MAZZOLAN M. Aluminum alloy structures[M]. Boston:Pitman, 1985.

Load-carrying capacity of stiffened short plates based on imperfection sensitivity

RichHTML

PDF (PC)

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments

[1]	Xiangtao MA, Fayao WANG, Yingjie ZHU, Peng HAO, Bo WANG, Guanri LIU. Accelerated optimization design of stiffened cylindrical shell for imperfection tolerance [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2023, 44(1): 226430-226430.
[2]	Muchen WU, Jiangtao CHEN, Tangfan XIAHOU, Wei ZHAO, Yu LIU. Separating sensitivity analysis of aleatory and epistemic uncertainties in non-parametric probability-box [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2023, 44(1): 226658-226658.
[3]	Haoge LI, Hua YANG, Yuxin YANG, Weifang CHEN. Refinement optimization design for heat reduction on windward surface of hypersonic lifting body [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2022, 43(S2): 124-137.
[4]	CHEN Zhiyuan, LI Luyi. Efficient methods for reliability sensitivity analysis of inputs with distribution parameter uncertainty [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2022, 43(9): 325881-325881.
[5]	ZHANG Baozhen, WANG Hanping, XU Feng, WU Zhiqing. Simulation speed-up and accuracy compensation measures for adjusting mechanism of variable stator vane [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2022, 43(9): 226034-226034.
[6]	WANG Rui, ZHOU Zhou, GUO Ronghua, HUANG Yuechen. Multi-body dynamics simulation and experiment of solar-powered UAV parachute landing [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2022, 43(8): 225721-225721.
[7]	ZHANG Donghui, ZHANG Taihua, CUI Yanxiang, CHEN Chen, WANG Sheng. Sensitivity analysis of aerodynamic parameters of stratospheric tethered balloon [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2022, 43(5): 125083-125083.
[8]	LI Ning, LIU Zhiyong, WANG Na, YANG Lei. Simulation on antenna servo control system based on DUEA [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2022, 43(2): 324986-324986.
[9]	CAO Fan, ZHANG Meifang, HU Xiao, TANG Zhili. Natural laminar flow optimization and transition sensitivity analysis of axisymmetric nacelle [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2022, 43(11): 527330-527330.
[10]	NIU Xiaotian, LI Jie, ZHOU Zhipeng, YANG Zhao, CHANG Mochen. Sensitivity analysis of transonic laminar flow characteristics of an aircraft with laminar wing section [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2022, 43(11): 526771-526771.
[11]	HU Zhengwen, ZHANG Baoqiang, DENG Zhenhong. Cross-layer dimension reduction based on probability box global sensitivity analysis and active subspace method [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2021, 42(9): 224582-224582.
[12]	XIONG Bing, FAN Xiaoqiang, WEI Jinpeng, CHENG Jie, ZHAO Zhigang. Force accounting systems of aircraft/engine integration and force accounting parameter sensitivity analysis [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2021, 42(8): 525808-525808.
[13]	FAN Zhouwei, YU Xiongqing, WANG Chao, ZHONG Bowen. Sensitivity analysis of key design parameters of commercial aircraft using deep neural network [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2021, 42(4): 524353-524353.
[14]	SONG Xin, SHEN Hua, CHEN Longbao, LI Tianyu. Influence of parameter estimates of Weibull distributions on detail fatigue rating [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2021, 42(3): 224759-224759.
[15]	ZHOU Ruyi, FENG Wenhao, DENG Zongquan, GAO Haibo, DING Liang, LI Nan. Sensitivity analysis and dominant parameter estimation of wheel-terrain interaction model [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2021, 42(1): 524076-524076.