航空用高速连接器信号反射抑制与优化设计

doi:10.7527/S1000-6893.2023.28937

Abstract

Abstract:

Optimizing the electrical-mechanical structure of high-speed connector to suppress the reflection of signals during its internal transmission is essential to improve the transmission performance of high-speed connectors and the stability of high-speed interconnection systems. The fundamental sources and influencing factors of the signal reflection of high-speed connectors are analyzed， and an optimal design method for improving signal reflection of high-speed connectors in engineering is proposed based on simulation results of optimized quantities. Firstly， the characterization parameters of the signal reflection problem in the frequency and time domains are derived. Then， HFSS simulation is conducted to analyze the influence law of change of each optimized parameter on signal reflection. Finally， based on the simulation results， the system optimization scheme of the high-speed connector is determined with the objective of optimizing the characterization parameters of signal reflection， and its effectiveness is verified by test experiments. The design results show that signal reflection is aggravated when there is a large difference in wire diameter at the line diameter change of the con-tact pins， and signal reflection can be effectively suppressed by increasing the diameter of the terminated cable and choosing the insulator materials with smaller dielectric constants for socket ends. The optimization result shows that after adopting the proposed optimization design method， the maximum value of differential impedance of high-speed connectors is reduced to less than 110 Ω， the minimum value is increased by more than 2.72%， and the fluctuation range is reduced by 31.7%-41.8%. The maximum value of return loss in different frequency range is reduced， with the overall value reduction of about 9.8%-12.3%. The problem of signal reflection is shown to be significantly improved.

Key words: high-speed connector, signal reflection, signal transmission, signal integrity, HFSS simulation, aviation communication, optimization design

CLC Number:

V243.1

Yanyan LUO, Shuo YANG, Xiaosong PAN, Xuhuai ZHAO, Li ZHANG. Signal reflection suppression and optimized design of high⁃speed connectors for aerospace applications[J]. Acta Aeronautica et Astronautica Sinica, 2024, 45(7): 328937-328937.

Figures/Tables 37

Fig.1

Fig.2

Fig.3

Fig.4

Fig.5

Fig.6

Fig.7

Fig.8

Fig.9

Fig.10

Fig.11

Fig.12

Table 1

Fig.13

Fig.14

Fig.15

Table 2

Table 3

Table 4

Table 5

Table 6

Fig.16

Fig.17

Table 7

Table 8

Table 9

Fig.18

Fig.19

Table 10

Table 11

Table 12

Fig.20

Fig.21

Fig.22

Fig.23

Fig.24

Table 13

References 27

1	ALLRED R J， FURSE C. Reflection budgeting methodology for high-speed serial link signal integrity design［J］. Progress in Electromagnetics Research B， 2021， 91（1）： 59-77.
2	孔繁，盛卫星，马晓峰，等. 高速背板互连的信号完整性仿真方法［J］. 系统工程与电子技术， 2014， 36（10）： 2082-2088.
	KONG F， SHENG W X， MA X F， et al. Signal integrity simulation method for high-speed backplane interconnection［J］. Systems Engineering and Electronics， 2014， 36（10）： 2082-2088 （in Chinese）.
3	王小辉，朱丽，车程，等. 电气线路互联系统安全性设计与分析方法研究［J］. 西北工业大学学报， 2022， 40（3）： 690-698.
	WANG X H， ZHU L， CHE C， et al. Study on safety design and analysis method for electrical wiring interconnection system［J］. Journal of Northwestern Polytechnical University， 2022， 40（3）： 690-698 （in Chinese）.
4	张荷爽. 10 Gbps高速连接器的仿真、测试及优化［D］. 北京：北京邮电大学， 2019： 13-15.
	ZHANG H S. Simulation， test， and optimization of 10 Gbps high speed connector［D］. Beijing： Beijing University of Posts and Telecommunications， 2019： 13-15 （in Chinese）.
5	KIM H， KIM J J， PARK J， et al. High-frequency modeling and signal integrity analysis of a silicone rubber socket for high-performance package［J］. IEEE Transactions on Components， Packaging and Manufacturing Technology， 2017， 7（8）： 1356-1368.
6	BILAL H M， WANG Z R， GAO J C， et al. Impact of receptacle degradation and loose connection on signal integrity and electrical performance repeatability［J］. IET Circuits， Devices & Systems， 2020， 14（7）： 1012-1017.
7	段红玉. 四同轴高速连接器信号完整性分析［D］. 天津：河北工业大学， 2022： 16-18.
	DUAN H Y. Signal integrity analysis of the quadrax high-speed connector ［D］.Tianjin： Hebei University of Technology， 2022： 16-18. （in Chinese）
8	于争. 信号完整性揭秘：于博士SI设计手记［M］. 北京：机械工业出版社， 2013.
	YU Z. Secret of signal integrity： Notes on Dr. Yu’s design notes［M］. Beijing： China Machine Press， 2013 （in Chinese）.
9	ZHOU X L， LI L， LU B H， et al. Effects of the damage layer on connection loss of fiber-optic connectors［J］. Optical Fiber Technology， 2018， 46（12）： 137-140.
10	WANG Z R， GAO J C， FLOWERS G T， et al. Modeling and analysis of signal integrity of high-speed interconnected channel with degraded contact surface［J］. IEEE Transactions on Components， Packaging and Manufacturing Technology， 2019， 9（11）： 2227-2236.
11	尹治宇. Mini SAS连接器的信号完整性分析［D］. 成都：电子科技大学， 2016： 22-24.
	YIN Z Y. Signal integrity analysis of Mini SAS connector［D］.Chengdu： University of Electronic Science and Technology of China， 2016： 22-24. （in Chinese）
12	张志远. SAS硬盘连接器的信号完整性分析与研究［D］. 成都：电子科技大学， 2017： 32-52.
	ZHANG Z Y. Analysis and research on signal integrity of SAS hard disk connector［D］.Chengdu： University of Electronic Science and Technology of China， 2017： 32-52. （in Chinese）
13	WU B P. Micro-cables out of high-speed communication chip through embedded wires in the package substrate［C］∥ 2018 IEEE CPMT Symposium Japan （ICSJ）. Piscataway： IEEE Press， 2018： 109-112.
14	黄波. 电连接器耦合失效机理及可靠性研究［D］. 成都：电子科技大学， 2016： 92-102.
	HUANG B. Research on coupling failure mechanism and reliability for electrical connector［D］.Chengdu： University of Electronic Science and Technology of China， 2016： 92-102. （in Chinese）
15	高鹏宇. 10Gbps高速连接器传输性能研究［D］. 天津：河北工业大学， 2022： 31-52.
	GAO P Y. Research on transmission performance of 10 Gbps high-speed connector［D］.Tianjin： Hebei University of Technology， 2022： 31-52. （in Chinese）
16	LUNDQUIST E J， FURSE C. Connector impedance and frequency modes in aerospace wiring systems［J］. Microwave and Optical Technology Letters， 2017， 59（1）： 89-93.
17	徐晓丹. 高速高密度PCB信号完整性与电源完整性研究［D］. 成都：西南交通大学， 2015： 56-61.
	XU X D. Study of signal integrity and power integrity based on the high-speed and high density PCB［D］.Chengdu： Southwest Jiaotong University， 2015： 56-61. （in Chinese）
18	BEN R R， HU S Q， LI X M， et al. Signal intergrity analysis for SMA via on the PCB［C］∥ 2017 IEEE 9th International Conference on Communication Software and Networks （ICCSN）. Piscataway： IEEE Press， 2017： 865-869.
19	梁云忠，李红，伍权，等. 高速传输电连接器差分阻抗优化［J］. 电子测量与仪器学报， 2017， 31（3）： 481-486.
	LIANG Y Z， LI H， WU Q， et al. Differential impedance optimization of high speed electric connector［J］. Journal of Electronic Measurement and Instrumentation， 2017， 31（3）： 481-486 （in Chinese）.
20	梁云忠，李红，徐卫平. 基于电磁兼容的高速传输电连接器结构优化［J］. 微波学报， 2017， 33（6）： 66-69.
	LIANG Y Z， LI H， XU W P. Structure improvement of high-speed transmission electrical connector base on electromagnetic compatibility［J］. Journal of Microwaves， 2017， 33（6）： 66-69 （in Chinese）.
21	苏浩航，闫静纯. 10 Gbit/s高速串行通道的优化设计与研究［J］. 微波学报， 2020， 36（5）： 12-17.
	SU H H， YAN J C. The optimum design and analysis of 10 Gbit/s high-speed serial channel［J］. Journal of Microwaves， 2020， 36（5）： 12-17 （in Chinese）.
22	WANG L J， WU C Q， FAN L F， et al. Investigation of wave reflection at the joint with different wave impedances on two sides［J］. Waves in Random and Complex Media， 2023， 33（2）： 237-253.
23	GONG Z F， CHEN K， WANG W， et al. A pressure-sensitive fiber optic connector for loss analysis of physical contact［J］. Optical Fiber Technology， 2017， 36（7）： 134-138.
24	LI C H， LI T， GUELBENZU G， et al. Chip scale 12-channel 10 GB/s optical transmitter and receiver subassemblies based on wet etched silicon interposer［J］. Journal of Lightwave Technology， 2017， 35（15）： 3229-3236.
25	JI R， FLOWERS G T， GAO J C， et al. High-frequency characterization and modeling of coaxial connectors with degraded contact surfaces［J］. IEEE Transactions on Components， Packaging and Manufacturing Technology， 2018， 8（3）： 447-455.
26	BOUJMAD Y， BERMOND C， ARTILLAN P， et al. Design of a high-speed Ethernet connector for harsh environments［J］. IEEE Transactions on Components， Packaging and Manufacturing Technology， 2020， 10（10）： 1684-1692.
27	CHU Y H， XIAO K， HO Y， et al. SNEM： Full S-parameter synthesis from near-end measurement［J］. IEEE Transactions on Electromagnetic Compatibility， 2017， 59（4）： 1302-1311.

仿真项目	Δb/mm	b/mm
仿真1	-0.52	0.51（b=c）
仿真2	-0.26	0.77
仿真3	+0.24	1.27（b=a）

仿真项目	Δd/mm	d/mm
仿真4	-0.4	1.5
仿真5	-0.8	1.1
仿真6	-1.2	0.7

d/mm	最小值/Ω	最大值/Ω	波动范围/Ω
0.7	90.13	110.72	20.59
1.1	90.18	110.74	20.56
1.5	90.15	110.75	20.60
1.9	90.23	110.78	20.55

d/mm	最大回波损耗/dB
d/mm	600 MHz	2 GHz	5 GHz
0.7	-29.10	-8.70	-7.90
1.1	-29.10	-8.71	-7.90
1.5	-29.12	-8.73	-7.91
1.9	-29.12	-8.75	-7.91

d/mm	最大回波损耗/dB
d/mm	600 MHz	2 GHz	5 GHz
0.7	-21.88	-8.15	-6.90
1.1	-21.88	-8.17	-6.95
1.5	-21.89	-8.20	-6.95
1.9	-21.90	-8.21	-6.96

Signal reflection suppression and optimized design of high⁃speed connectors for aerospace applications

RichHTML

PDF (PC)

Knowledge

Abstract

Cite this article

share this article

Figures/Tables 37

References 27

Related Articles 15

Recommended Articles

Metrics

Comments

仿真项目	Δh/mm	h/mm
仿真7	-0.05	1.85
仿真8	-0.02	1.88
仿真9	+0.02	1.92
仿真10	+0.05	1.95

介质厚度/mm	最小值/Ω	最大值/Ω	波动范围/Ω
6.02	90.23	110.78	20.55
6.00	90.23	110.78	20.55
5.97	90.22	110.74	20.52
5.92	90.18	110.75	20.57

介质厚度/mm	最大回波损耗/dB
介质厚度/mm	600 MHz	2 GHz	5 GHz
6.02	-29.12	-8.75	-7.91
6.00	-28.99	-8.73	-7.91
5.97	-28.98	-8.71	-7.89
5.92	-28.95	-8.67	-7.86

电缆线径/mm	介质材料	最小值/Ω	最大值/Ω	波动范围/Ω
0.44	LCP	89.81	109.27	19.46
0.44	PTFE	94.75	108.62	13.87
0.46	LCP	89.31	106.01	16.7
0.46	PTFE	94.08	105.88	11.8

电缆线径/mm	介质材料	最大回波损耗/dB
电缆线径/mm	介质材料	600 MHz	2 GHz	5 GHz
0.44	LCP	-35.23	-12.23	-11.51
0.44	PTFE	-35.01	-13.38	-13.05
0.46	LCP	-38.02	-14.13	-12.14
0.46	PTFE	-38.95	-15.09	-13.82

[1]	Jinzhao DAI, Haixin CHEN. Optimization design method of three⁃dimensional wave cancellation biplane derived by shock⁃wave morphology [J]. Acta Aeronautica et Astronautica Sinica, 2024, 45(6): 628942-628942.
[2]	Shusheng CHEN, Muliang JIA, Yanxu LIU, Zhenghong GAO, Xinghao XIANG. Deformation modes and key technologies of aerodynamic layout design for morphing aircraft: Review [J]. Acta Aeronautica et Astronautica Sinica, 2024, 45(6): 629595-629595.
[3]	Siji WANG, Yuwei ZHANG, Kaiming HUANG, Biao LYU, Haifeng ZHAO, Hu WANG, Mingfu LIAO. An optimization method for helicopter power turbine rotor system based on improved particle swarm optimization algorithm [J]. Acta Aeronautica et Astronautica Sinica, 2024, 45(1): 228608-228608.
[4]	Qian YANG, Haoran ZHENG, Xianda CHENG, Wei DONG. Optimization design method for hot air anti⁃icing system based on bleed air control [J]. Acta Aeronautica et Astronautica Sinica, 2023, 44(S2): 729285-729285.
[5]	Weihong ZHANG, Han ZHOU, Shaoying LI, Jihong ZHU, Lu ZHOU. Material⁃structure integrated design for high⁃performance aerospace thin⁃walled component [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2023, 44(9): 627428-627428.
[6]	Yifu CHEN, Yuhang MA, Qingsheng LAN, Weiping SUN, Yayun SHI, Tihao YANG, Junqiang BAI. Uncertainty analysis and gradient optimization design of airfoil based on polynomial chaos expansion method [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2023, 44(8): 127446-127446.
[7]	Chaoyu LIU, Feng QU, Di SUN, Chuanzhen LIU, Zhansen QIAN, Junqiang BAI. Discretized adjoint based aerodynamic optimization design for hypersonic osculating-cone waverider [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2023, 44(4): 126664-126664.
[8]	Weimin BAO. A review of reusable launch vehicle technology development [J]. Acta Aeronautica et Astronautica Sinica, 2023, 44(23): 629555-629555.
[9]	Jiaqi HE, Weida WU, Yangjun LUO. A robust shape control method for space-borne antenna reflectors based on P-CS uncertainty quantification model and digital twin [J]. Acta Aeronautica et Astronautica Sinica, 2023, 44(19): 328343-328343.
[10]	Jiehua TIAN, Di SUN, Feng QU, Junqiang BAI. Airfoil parameterization method based on CST⁃GAN [J]. Acta Aeronautica et Astronautica Sinica, 2023, 44(18): 128280-128280.
[11]	WANG Chen, YANG Yang, SHEN Xing, XIA Yuying. An equivalent strength model of corrugated panel and optimization design for morphing aircraft [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2022, 43(6): 526146-526146.
[12]	YU Dalei, CUI Xining, LI Chengwen, LIU Tingting, ZHOU Yong. Multi-core computing and processing platform based on CPCIe high speed bus in airborne applications [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2022, 43(5): 325238-325238.
[13]	ZHANG Zhenkai, JIA Sijia, SONG Chen, YANG Chao. Optimum design of wind tunnel test model for compliant morphing trailing edge [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2022, 43(3): 226071-226071.
[14]	CHANG Min, SUN Yang, BAI Junqiang, MENG Xiaoxuan. Aerodynamic design optimization of twice folding wing for tube-launched UAV constrained by flat-angle rotation mechanism [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2022, 43(11): 526331-526331.
[15]	YANG Tihao, BAI Junqiang, DUAN Zhuoyi, SHI Yayun, DENG Yiju, ZHOU Zhu. Aerodynamic design of laminar flow wings for jet aircraft: Review [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2022, 43(11): 527016-527016.

线径/mm	插入损耗/dB	近端串扰/dB	远端串扰/dB
0.44	-3.31	-31.94	-32.98
0.46	-3.12	-31.91	-33.11