树脂基烧蚀材料细观传热特性预测

doi:10.7527/S1000-6893.2017.721512

Abstract

Abstract:

Low-density resin-based ablative materials have been widely used in spacecraft for deep space exploration in recent years. To improve their thermal insulation capacity, we need to conduct an analysis of the mechanism of heat transfer, especially meso-heat transfer, of the material. Based on microscopic observation and statistical analysis of the material, a theoretical model for the unit cells of different scales of the material was established. The calculated results were compared with the experimental values, and the influence of the parameters was given. A finite element stochastic model was also established. The calculated results were compared with the experimental values, and the influence of parameterization based on finite element was given. The results show that the error between the theoretical model and the experimental value is 12% and 7.6% for the two resin-based ablation materials respectively, and the correctness of the theoretical model is thus verified. The difference between the thermal conductivity values obtained with the stochastic model and the experimental values is less than 10%, verifying the correctness of the stochastic model. The model proposed and parameter analysis is of great significance for improvement of the thermal insulation performance and processing technology of the resin-based ablative material.

Key words: resin-based, ablative material, heat conductivity coefficient, mesoscopic observation, unit cell model, finite element, random model

CLC Number:

V435⁺.14

GAO Junjie, YU Jijun, HAN Haitao, DENG Daiying. Prediction of meso-heat transfer characteristics of resin-based ablative materials[J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2017, 38(S1): 721512-721512.

References

[1] 陆小龙. 酚醛树脂基复合材料制备及其烧蚀性能研究[D]. 哈尔滨: 哈尔滨工业大学, 2012. LU X L. Preparation of phenolic resin matrix composites and its ablation properties[D]. Harbin: Harbin Institute of Technology, 2012 (in Chinese).
[2] DASGUPTA A, AGARWAL R K. Orthotropic thermal conductivity of plain-weave fabric composites using a homogenization technique[J]. Journal of Composite Materials, 1992, 26(18): 2736-2758.
[3] ZENG S O, HUNT A, GREIF R. Geometric structure and thermal conductivity of porous medium silica aerogel[J]. Journal of Heat Transfer, 1995, 117(4): 1055-1058.
[4] NING Q G, CHOU T W. Closed-form solutions of the in-plane effective thermal conductivities of woven-fabric composites[J]. Composites Science & Technology, 1995, 55(1): 41-48.
[5] DASGUPTA A, AGARWAL R K, BHANDARKAR S M. Three-dimensional modeling of woven-fabric composites for effective thermo-mechanical and thermal properties[J]. Composites Science & Technology, 1996, 56(3): 209-223.
[6] BIGAUD D, GOYHENECHE J M, HAMELIN P. A global-local non-linear modeling of effective thermal conductivity tensor of textile-reinforced composites[J]. Composites Part A: Applied Science & Manufacturing, 2001, 32(10): 1443-1453.
[7] AL-SULAIMAN F A, MOKHEIMER E M A, AL-NASSAR Y N. Prediction of the thermal conductivity of the constituents of fiber reinforced composite laminates[J]. Heat and Mass Transfer, 2006, 42(5): 370-377.
[8] FAROOQI J K, SHEIKH M A. Finite element modelling of thermal transport in ceramic matrix composites[J]. Computational Materials Science, 2006, 37(3): 361-373.
[9] SCHUSTER J, HEIDER D, SHARP K, et al. Thermal conductivities of three-dimensionally woven fabric composites[J]. Composites Science & Technology, 2008, 68(9): 2085-2091.
[10] LI H, LI S G, WANG Y C. Prediction of effective thermal conductivities of woven fabric composites using unit cells at multiple length scales[J]. Journal of Materials Research, 2011, 26(3): 384-394.
[11] 陈则韶, 钱军, 叶一火. 复合材料等效导热系数的理论推算[J]. 中国科学技术大学学报, 1992(4): 416-424. CHEN Z S, QIAN J, YE Y H. Theoretical calculation of equivalent thermal conductivity of composites[J]. Journal of University of Science and Technology of China, 1992(4): 416-424 (in Chinese).
[12] 程耿东, 刘书田. 单向纤维复合材料导热性预测[J]. 复合材料学报, 1996, 13(1): 78-85. CHENG G D, LIU S T. Prediction of thermal conductivity of unidirectional fiber composites[J]. Acta Mareriae Composite Sinica, 1996, 13(1): 78-85 (in Chinese).
[13] 李锋华. 聚合物/中空微球复合材料传热性能及机理的研究[D]. 广州: 华南理工大学, 2003. LI F H. Study on heat transfer performance and mechanism of polymer/hollow microsphere composites[D]. Guangzhou: South China University of Technology, 2003 (in Chinese).
[14] 夏彪, 卢子兴. 三维编织复合材料热物理性能的有限元分析[J]. 航空学报, 2011, 32(6): 1040-1049. XIA B, LU Z X. Finite element analysis of thermophysical properties of 3D braided composites[J]. Acta Aeronautica et Astronautica Sinica, 2011, 32(6): 1040-1049 (in Chinese).
[15] 罗文, 黄志雄, 黄赤, 等. 复合泡沫塑料等效导热系数的数值模拟[J]. 武汉理工大学学报, 2015, 37(12): 12-16. LUO W, HUANG Z X, HUANG C, et al. Numerical simulation of equivalent thermal conductivity of composite foam[J]. Journal of Wuhan University of Technology, 2015, 37(12): 12-16 (in Chinese).
[16] 方文振, 粘权鑫, 张虎, 等. 气凝胶及其纤维复合材料等效导热系数预测[J]. 西安交通大学学报, 2015, 49(7): 25-29. FANG W Z, NIAN Q X, ZHANG H, et al. Prediction of equivalent thermal conductivity of airgel and its fiber composites[J]. Journal of Xi'an Jiaotong University, 2015, 49(7): 25-29 (in Chinese).
[17] CUNNINGTON G R, ZIERMAN C A, FUNAI A I, et al. Performance of multilayer insulation systems for temperature to 700K: NASA CR-907[R]. Washington, D.C.: NASA, 1967.

Prediction of meso-heat transfer characteristics of resin-based ablative materials

PDF (PC)

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments

[1]	WU Zhiyuan, YAN Han, WU Linchao, MA Hui, QU Yegao, ZHANG Wenming. Vibration characteristics of rotating cracked-blade-flexible-disk coupling system [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2022, 43(9): 625442-625442.
[2]	CAO Yi, MENG Gang, JU Yongjian, XU Weisheng. Large-stroke compliant micro-positioning stage considering parasitic rotation [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2022, 43(7): 425498-425498.
[3]	YU Yuxi, ZHANG Weibin, SUN Yi, CONG Minghui, ZHU Jian, SONG Jingyuan. Simulation analysis of deformation behavior and resilience of Ni-based alloy canted coil spring for dynamic seal [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2022, 43(7): 425527-425527.
[4]	CAO Yong, ZHANG Chao. Impact damage behavior of thin-ply composites: A review [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2022, 43(6): 525323-525323.
[5]	LIU Zhihui, NIU Junchuan, JIA Ruihao. Energy flow model for high-frequency vibration of beams in thermal-gradient environment [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2022, 43(5): 425336-425336.
[6]	CAI Jin, YAN Xue, LI Wei, MENG Qingxun. Numerical analysis of ultrasonic shot peening based on DEM-FEM coupling [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2022, 43(4): 525925-525925.
[7]	YU Chengyue, LIU Bo, LI Chuanzheng, XUE Chuang. Analytical research on connecting structure of composite material satellite bearing cylinder [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2022, 43(3): 225161-225161.
[8]	JIANG Chunyang, WU Lihui, CHANG Yunlong, XUE Peng, NI Dingrui, XIAO Bolv, MA Zongyi. Hybrid welding of riveting/friction stir lap joining of aluminum alloy to resin-based composite [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2022, 43(2): 625190-625190.
[9]	YANG Xiawei, PENG Chong, MA Tiejun, WEN Guodong, WANG Yanying, CHAI Xiaoxia, XU Yaxin, LI Wenya. Finite element analysis of fatigue crack growth of linear friction welded superalloy joints [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2022, 43(2): 625004-625004.
[10]	WAN Aoshuang, WANG Zhenming, LI Dinghe. Three-scale analysis of woven composite plates based on third-order shear computational continua method [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2022, 43(12): 226614-226614.
[11]	JIN Yulin, LIU Zhiwen, CHEN Yushu. Fault simulation of blade-casing rubbing for dual-rotor system of aero-engines [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2022, 43(12): 425072-425072.
[12]	CAO Zhenzhong, ZHANG Fan, ZHANG Dingguo, YU Yi. Containment of aero-engine casing with bolted flanges [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2021, 42(9): 224563-224563.
[13]	PENG Jinfeng, WU Dongrun, CUI Weiyun, CAI Deng'an, ZHOU Guangming. Design and analysis of simulated ice with 3D printed sandwich composite material [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2021, 42(9): 224536-224536.
[14]	LUO Chuyang, JIANG Shengda, CHEN Mengxiong, ZHANG Peng, XIA Xufeng, CAI Peipei. Preparation and evaluation of carbon fiber/polyimide composite attaching collars based on high temperature resin transfer mould process [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2021, 42(7): 625438-625438.
[15]	DUAN Jiatong, SUI Fucheng, LIU Hanhai, XIE Fang, OUYANG Tian, BAO Rui. Fatigue crack growth performance of thin-walled structure under bending load [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2021, 42(5): 524326-524326.