鲁棒的结构网格自动化重叠方法

doi:10.7527/S1000-6893.2016.0034

流行力学与飞行力学

本期目录 | 过刊浏览 | 高级检索

前一篇 | 后一篇

鲁棒的结构网格自动化重叠方法

王文¹, 阎超¹, 袁武², 黄宇¹, 席柯³

1. 北京航空航天大学航空科学与工程学院, 北京 100083;
2. 中国科学院计算机网络信息中心超级计算中心, 北京 100190;
3. 中国兵器工业导航与控制技术研究所, 北京 100089

收稿日期:2016-01-03 修回日期:2016-01-18 出版日期:2016-10-15 发布日期:2016-02-22
通讯作者: 阎超,Tel.:010-82317019 E-mail:yanchao@buaa.edu.cn E-mail:yanchao@buaa.edu.cn
作者简介:王文男,博士研究生。主要研究方向:计算流体力学,重叠网格方法。Tel:010-82338071 E-mail:wangwenbuaa@126.com;阎超男,博士,教授,博士生导师。主要研究方向:空气动力学,计算流体力学。Tel:010-82317019 E-mail:yanchao@buaa.edu.cn

A robust and automatic structured overlapping grid approach

WANG Wen¹, YAN Chao¹, YUAN Wu², HUANG Yu¹, XI Ke³

1. School of Aeronautic Science and Engineering, Beihang University, Beijing 100083, China;
2. Supercomputing Center, Computer Network Information Center, Chinese Academy of Sciences, Beijing 100190, China;
3. Institute of Ordnance Industry Navigation and Control Technology, Beijing 100089, China

Received:2016-01-03 Revised:2016-01-18 Online:2016-10-15 Published:2016-02-22

摘要/Abstract

摘要：

网格技术是目前数值模拟中的关键技术之一。重叠网格是一种放宽拓扑要求、减小网格生成难度的网格技术。本文以结构重叠网格为基础，分别针对挖洞、寻点以及洞面优化方法进行了研究和改进，同时完成物面网格重叠，形成了一套鲁棒的、自动化的网格重叠系统。在挖洞方面，结合“最小洞映射”方法，提出“复合式挖洞”方法，节省内存开销；在寻点方面，通过构建格心虚网格，保证搜索空间的连续性，同时结合“有效搜索”思想，排除部分对寻点无贡献的网格点，进而减少ADT叉树节点；在洞面优化上，改变填补判别法则并引入两类受保护洞内点，确保两层插值边界建立，提高鲁棒性；在物面网格重叠上，利用物面投影法完成坐标修正，实现物面附近网格流动变量的准确传递。为验证本文方法，分别对定常翼身组合体DLR-F6绕流和非定常机翼挂载分离过程进行了数值模拟，计算结果与实验结果吻合良好，表明该结构重叠网格系统对多物体间定常、非定常扰流具有较好的数值模拟能力和较高的模拟精度，具有较高的工程应用价值。

关键词: 计算流体力学, 结构重叠网格, 洞映射, 寻点, 洞面优化方法, 翼身组合体, 机翼挂载分离

Abstract:

The grid technology is a crucial aspect of numerical simulation up till the present moment. Overlapping grid technology could relax the restriction of structure topology, thus reducing the difficulty of grid generation. Based on the structured overlapping grid, hole-cutting, donor search, and overlapping optimization are explored and improved, and surface grid assemblage is completed in this thesis. Simultaneously, a robust and automatic grid overlapping system is constructed. In order to save memory, based on the minimum hole mapping method, a composite hole-cutting method is proposed. Regarding donor search, the continuity of the search space is preserved with the virtual cell-centered grid. Moreover, the nodes of alternating digital tree (ADT) are decreased by an efficient search algorithm which excludes some non-contributing grid points. With respect to overlapping optimization, two kinds of protected hole-points are inserted and a new principle is developed to ensure the construction of two interpolated layers in paste phase, intensifying the robustness of overlapping optimization. The coordinates of near-body grids are corrected by projection method to make sure the accurate transmission of flow variables. With the enhanced algorithm, a steady DLR-F6 wing-body flow and an unsteady wing/pylon/store separation flow are performed, and excellent agreement of computational results compared with experimental data has been achieved. The algorithm shows remarkable capability and accuracy in the simulation of steady or unsteady multiple bodies flow and provides great application value for engineering.

Key words: computational fluid dynamics, structured overlapping grid, hole-mapping, donor search, hole optimization method, wing-body, wing/pylon/store separation

中图分类号:

V211.3

王文, 阎超, 袁武, 黄宇, 席柯. 鲁棒的结构网格自动化重叠方法[J]. 航空学报, 2016, 37(10): 2980-2991.

WANG Wen, YAN Chao, YUAN Wu, HUANG Yu, XI Ke. A robust and automatic structured overlapping grid approach[J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2016, 37(10): 2980-2991.

参考文献

[1] THOMAS H P, ANTHONY J S. High-lift OVERFLOW analysis of the DLR-F11 wind tunnel model:AIAA-2014-2697[R]. Reston:AIAA, 2014.
[2] MENDENHALL M R, LESIEUTRE D J, CARUSO S C, et al. Aerodynamic design of pegasustm, concept to flight with CFD:AGARD CP 43[R]. Paris:AGARD, 1980.
[3] LIEVER P A, HABCHI S D. Separation analysis of launch vehicle crew escape systems:AIAA-2004-4726[R]. Reston:AIAA, 2004.
[4] WOODEN P A, BRYAN W, JUBARAJ S B. Calibrating CFD predictions for use in multiple store separation analysis:AIAA-1998-0754[R]. Reston:AIAA, 1998.
[5] KIM J W, PARK S H, YU Y H. Euler and Navier-Stokes simulations of helicopter rotor blade in forward flight using an overlapped grid solver:AIAA-2009-4268[R]. Reston:AIAA, 2009.
[6] BENEK J A, STEGER J L, DOUGHERTY F C. A flexible grid embedding technique with applications to the Euler equations:AIAA-1983-1944[R]. Reston:AIAA, 1983.
[7] ROGERS S E, SUHS N E, DIETZ W E. PEGASUS 5:An automated preprocessor for overset-grid computational fluid dynamics[J]. AIAA Journal, 2003, 41(6):1037-1045.
[8] WILLIAM M C. The overgrid interface for computational simulations on overset grids:AIAA-2002-3188[R]. Reston:AIAA, 2002.
[9] NOACK R W. SUGGAR:A general capability for moving body overset grid assembly:AIAA-2005-5117[R]. Reston:AIAA, 2005.
[10] CHEN S Y, CHEN Y C, XIA Z H, et al. Constrained large-eddy simulation and detached eddy simulation of flow past a commercial aircraft at 14 degrees angle of attack[J]. Sci China-Phys Mech Astron, 2013, 56(2):270-276.
[11] ZHAO M, CAO Y H. Numerical simulation of rotor flow field based on overset grids and several spatial and temporal discretization schemes[J]. Chinese Journal of Aeronautics, 2012, 25(2):155-163.
[12] 徐嘉, 刘秋洪, 蔡晋生, 等. 基于隐式嵌套重叠网格技术的阻力预测[J]. 航空学报, 2013, 34(2):208-217. XU J, LIU Q H,CAI J S, et al. Drag prediction based on overset grids with implicit hole cutting technique[J]. Acta Aeronautica et Astronautica Sinica, 2013, 34(2):208-217(in Chinese).
[13] 田书玲, 伍贻兆, 夏健. 基于非结构重叠网格的二维外挂物投放模拟[J]. 空气动力学学报, 2007, 25(2):225-249. TIAN S L, WU Y Z, XIA J. 2D store separation simulation using unstructured overlapping grid[J]. Acta Aerodynamica Sinica, 2007, 25(2):225-249(in Chinese).
[14] 田书玲, 伍贻兆, 夏健. 基于动态非结构重叠网格法的直升机前飞非定常流场数值模拟研究[J]. 航空学报, 2007, 28(5):1047-1054. TIAN S L, WU Y Z, XIA J. Numerical simulation research of unsteady flow field around helicopter in forward flight on dynamic overset unstructured grids[J]. Acta Aeronautica et Astronautica Sinica, 2007, 28(5):1047-1054(in Chinese).
[15] 田书玲, 伍贻兆, 夏健. 用动态非结构重叠网格法模拟三维多体相对运动绕流[J]. 航空学报, 2007, 28(1):46-51. TIAN S L, WU Y Z, XIA J. Simulation of flow past multri-body in relative motion with dynamic unstructured overset grid method[J]. Acta Aeronautica et Astronautica Sinica, 2007, 28(1):46-51(in Chinese).
[16] SLOTNICK J, KANDULA M, BUNING P. Navier-Stokes simulation of the space shuttle launch vehicle flight transonic flowfield using a large scale Chimera grid system:AIAA-1994-1860[R]. Reston:AIAA, 1994.
[17] LABOZZETTA W F, GATZKE T D. MACGS-towards the complete grid generation system:AIAA-1994-1923[R]. Reston:AIAA, 1994.
[18] CHIU I, MEAKIN R. On automating domain connectivity for overset grids:AIAA-1995-0854[R]. Reston:AIAA, 1995.
[19] MEAKIN R. Object x-ray for cutting holes in composite overset structured grids:AIAA-2001-2537[R]. Reston:AIAA, 2001.
[20] NOACK R W. Resolution appropriate overset grid assembly for structured and unstructured grids:AIAA-2003-4123[R]. Reston:AIAA, 2003.
[21] NOACK R W. A direct cut approach for overset hole cutting:AIAA-2007-3835[R]. Reston:AIAA, 2007.
[22] LEE Y L, BAEDER J D. Implicit hole cutting-a new approach to overset grid connectivity:AIAA-2003-4128[R]. Reston:AIAA, 2003.
[23] TAYLOR S, WANG J C T. Launch-vehicle simulations using a concurrent, implicit Navier-Stokes solver:AIAA-1995-0223[R]. Reston:AIAA, 1995.
[24] 袁武, 阎超, 席柯. 洞映射方法的研究和改进[J]. 北京航空航天大学学报, 2012, 38(4):563-568. YUAN W, YAN C, XI K. Investigation and enhancement of hole mapping method[J]. Journal of Beijing University of Aeronautics and Astronautics, 2012, 38(4):563-568(in Chinese).
[25] STUART E R. Improvements to the Pegasus5 overset CFD software[C]//12th Symposium on Overset Grids and Solution Technology, 2014.
[26] BONET J, PERAIRE J. An alternating digital tree (ADT) algorithm for 3D geometric searching and intersection problems[J]. International Journal for Numerical Methods in Engineering, 1991, 31(1):1-17.
[27] BELK D M, MAPLE R C. Automated assembly of structured grids for moving body problems:AIAA-1995-1680[R]. Reston:AIAA, 1995.
[28] 王文, 阎超, 袁武, 等. 新型重叠网格洞面优化方法及其应用[J]. 航空学报, 2016, 37(3):826-835. WANG W, YAN C, YUAN W, et al. Novel overlapping optimization algorithm and its applications[J]. Acta Aeronautica et Astronautica Sinica, 2016, 37(3):826-835(in Chinese).
[29] 阎超. 计算流体力学方法及应用[M]. 北京:北京航空航天大学出版社, 2006:18-25. YAN C. Computational fluid dynamic's methods and applications[M]. Beijing:Beihang University Press, 2006:18-25(in Chinese).
[30] KELLY R, BRODERSEN O. Summary of data from the second AIAA CFD drag prediction workshop:AIAA-2004-0555[R]. Reston:AIAA, 2004.
[31] HALL L H, PARTHASARATHY V. Validation of an automated chimera/6-DOF methodology for multiple moving body problems:AIAA-1998-0767[R]. Reston:AIAA, 1998.
[32] LEE S, PARK M, CHO K W, et al. A new automated chimera method for the prediction of store trajectory:AIAA-1999-3131[R]. Reston:AIAA, 1999.

E-mail：hkxb@buaa.edu.cn

关于我们

期刊社服务

专业学科

封面文章

友情链接

主管单位：中国科学技术协会主办单位：中国航空学会北京航空航天大学

鲁棒的结构网格自动化重叠方法

A robust and automatic structured overlapping grid approach

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价

[1]	刘琦, 史勇杰, 胡志远, 徐国华. 共轴刚性旋翼气动及噪声特性的参数影响分析[J]. 航空学报, 2024, 45(9): 528856-528856.
[2]	陆凤霞, 韦坤, 王春雷, 鲍和云, 朱如鹏. 直升机中减三相流金属屑末可达性[J]. 航空学报, 2024, 45(1): 128524-128524.
[3]	任炯, 王刚, 胡国栋, 石晓露. 自适应Walsh函数有限体积方法[J]. 航空学报, 2023, 44(8): 127444-127444.
[4]	曹文博, 刘溢浪, 张伟伟. 基于降阶模型和梯度优化的流场加速收敛方法[J]. 航空学报, 2023, 44(6): 127090-127090.
[5]	樊宇翔, 赵瑞, 左政玄, 杨光, 李宇. 气体引射效应对壁面热流和摩擦阻力的影响[J]. 航空学报, 2023, 44(21): 528587-528587.
[6]	刘思华, 王占莹, 李利剑, 张敏弟. 头型对射弹高速入水稳定性的影响[J]. 航空学报, 2023, 44(21): 528437-528437.
[7]	乔建领, 韩忠华, 丁玉临, 宋文萍, 宋笔锋. 分层大气湍流场对远场声爆传播的影响[J]. 航空学报, 2023, 44(2): 626350-626350.
[8]	王圣业, 邓小刚, 董义道, 王东方, 蔡佳鸿. 面向工程湍流的高精度数值方法[J]. 航空学报, 2023, 44(15): 528728-528728.
[9]	夏侯唐凡, 陈江涛, 邵志栋, 吴晓军, 刘宇. 随机和认知不确定性框架下的CFD模型确认度量综述[J]. 航空学报, 2022, 43(8): 25716-025716.
[10]	罗佳杰, 宋文滨. 层流机翼及其增升装置嵌套协同优化方法[J]. 航空学报, 2022, 43(8): 125377-125377.
[11]	陈广强, 豆国辉, 魏昊功, 邹昕, 李齐, 刘周, 周伟江. 火星探测器大气数据测量方法[J]. 航空学报, 2022, 43(3): 626619-626619.
[12]	奕建苗, 邓枫, 覃宁, 刘学强. 快速预测跨声速流场的深度学习方法[J]. 航空学报, 2022, 43(11): 526747-526747.
[13]	杨体浩, 白俊强, 段卓毅, 史亚云, 邓一菊, 周铸. 喷气式客机层流翼气动设计综述[J]. 航空学报, 2022, 43(11): 527016-527016.
[14]	李乾, 王延奎, 贾玉红. 带边条翼的翼身组合体摇滚运动试验[J]. 航空学报, 2022, 43(11): 526008-526008.
[15]	王迪, 钱战森, 冷岩. 广义Burgers方程声爆传播模型高阶格式离散[J]. 航空学报, 2022, 43(1): 124916-124916.