角振动校准装置研究

doi:10.7527/S1000-6893.2014.0110

电子与控制

本期目录 | 过刊浏览 | 高级检索

前一篇 | 后一篇

角振动校准装置研究

薛景锋^1,2, 彭军², 李新良², 赵维谦¹

1. 北京理工大学光电学院, 北京 100081;
2. 北京长城计量测试技术研究所光纤传感技术中心, 北京 100095

收稿日期:2014-03-24 修回日期:2014-05-26 出版日期:2015-03-15 发布日期:2015-03-31
通讯作者: 薛景锋男,博士研究生。主要研究方向:动态测试与校准,光纤传感。Tel: 010-62452550 E-mail: xuejf2008@163.com E-mail:xuejf2008@163.com
作者简介:薛景锋男,博士研究生。主要研究方向:动态测试与校准,光纤传感。Tel: 010-62452550 E-mail: xuejf2008@163.com
基金资助:
国防基础科研项目

Research on angular vibration calibration devices

XUE Jingfeng^1,2, PENG jun², LI Xinliang², ZHAO Weiqian¹

1. School of Optoelectronics, Beijing Institute of Technology, Beijing 100081, China;
2. Optic Fiber Sensors Center, Beijing Changcheng Institute of Measurement and Metrology, Beijing 100095, China

Received:2014-03-24 Revised:2014-05-26 Online:2015-03-15 Published:2015-03-31
Supported by:
National Defense Basic Research Program

摘要/Abstract

摘要：

为提升对惯性器件的动态性能评价能力,通过对被校传感器施加标准正弦角振动激励,精确测量角振动过程,实现了对角振动传感器的校准。基于不同频段的特点,将校准频段划分为低频和高频2部分,并提出空气轴承与无刷直流力矩电机相结合的低频角振动台方案,以及轻质空心杯精密空气轴承与框式电磁驱动结构相结合的高频角振动台方案;分别采用精密角度编码器和衍射光栅激光干涉仪实现对低频和高频角振动的测量,成功研制出频率范围为0.25~550 Hz、角加速度范围为0.1~1 760 rad/s²以及角速度波形失真小于2%的角振动绝对法校准装置。与德国国家物理技术研究院的角振动校准装置相比,该装置能够显著提升承载能力,可广泛用于惯性器件动态性能的测试与评价。

关键词: 角振动, 校准, 角振动台, 激光干涉, 陀螺, 角加速度计

Abstract:

In order to improve the evaluating capabilities of dynamic properties for inertial sensors, by loading standard sine wave angular vibration and measuring precisely the angular vibration process, the angular vibration sensor is calibrated. Based on the different frequency specialties, the calibration device is divided to high-frequency and low-frequency two parts. In low-frequency calibration device, an air bearing and brushless direct current torque motor is used. In high-frequency calibration device, a precise air bearing of light hollow cuptype and electromagnetic ariving structure of frame type is designed. Using precise angular encoder measure low-frequency angular vibration and using diffraction grating heterodyne laser interferometer measure high-frequency angular vibration, respectively. A primary angular vibration calibration device with frequency range of 0.25 Hz to 550 Hz, angular acceleration range of 0.1 rad/s² to 1 760 rad/s²and angular velocity wave-distortion below 2% is successfully developed. Compared with the angular vibration calibration device in the Physikalisch-Technische Bundesanstalt, this equipment could provide more load bearing, and could be widely used in dynamic properties tests and evaluating of inertial sensors.

Key words: angular vibration, calibration, angular vibrator, laser interferometer, gyro, angular accelerometer

中图分类号:

V249.4
TH71

薛景锋, 彭军, 李新良, 赵维谦. 角振动校准装置研究[J]. 航空学报, 2015, 36(3): 962-969.

XUE Jingfeng, PENG jun, LI Xinliang, ZHAO Weiqian. Research on angular vibration calibration devices[J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2015, 36(3): 962-969.

参考文献

[1] Huo H Q, Ma M J, Li Y P, et al. The application of MHD angular rate sensor in aerospace[J]. Vacuum and Cryogenics, 2011, 17(2): 114-120 (in Chinese). 霍红庆, 马勉军, 李云鹏, 等. MHD角速度传感器在航天任务中的应用[J]. 真空与低温, 2011, 17(2): 114-120.

[2] Song H F, Deng H, Zhang R, et al. Measurement model for attitude of Gyro at small angle random to and fro vibration[J]. Acta Armamentarii, 2008, 29(4): 411-414 (in Chinese). 宋海峰, 邓浩, 张蓉, 等. 小角度随机往复振动条件下陀螺姿态测量研究[J]. 兵工学报, 2008, 29(4): 411-414.

[3] Li J L, Fang J C. The improved static error model of micromechanical gyroscope and calibration[J]. Journal of Astronautics, 2007, 28(6): 1614-1618 (in Chinese). 李建利, 房建成. 改进的MEMS陀螺静态误差模型及标定方法[J]. 宇航学报, 2007, 28(6): 1614-1618.

[4] Wu X S, Chen W Y. Review on angular accelerometer development [J]. Journal of Chinese Inertial Technology, 2007, 15(4): 458-463 (in Chinese). 吴校生, 陈文元. 角加速度计发展综述[J]. 中国惯性技术学报, 2007, 15(4): 458-463.

[5] Hulsing R. MEMS inertial rate and acceleration sensor[J]. Aerospace and Electronic Systems Magazine, 1998, 13(11): 17-23.

[6] Zhou J K, Liu H M. A discussion on some key points in developing high-frequency angular vibration tables[J]. Aviation Precision Manufacturing Technology, 2001, 37(2): 36-39 (in Chinese). 周纪琨, 刘红梅. 高频角振动台中某些特殊问题的研究[J]. 航空精密制造技术, 2001, 37(2): 36-39.

[7] Peng J, He Q, Xue J F, et al. Low frequency standard angular exciter[J]. Aviation Metrology & Measurement Technology, 2005, 25(6): 46-48 (in Chinese). 彭军, 何群, 薛景锋, 等. 低频标准角振动台[J]. 计测技术, 2005, 25(6): 46-48.

[8] Cheung W, Licht T. Progress in development of calibration systems for angular vibration pickups[C]//Proceedings of Fundamental and Applied Metrology. Budapest: XIX IMEKO World Congress, 2009.

[9] Cheung W, Park S, Kwon H, et al. Development of electrodynamic angular vibration exciter for calibration of angular vibration pickups[C]//Proceedings of the 37th International Congress and Exhibition on Noise Control Engineering. Washington, D.C.: International Institute of Noise-control Engineering, 2008.

[10] ISO 16063-15 Methods for the calibration of vibration and shock transducers—Part 15: Primary calibration by laser interferometry[S]. 2006.

[11] Teaubner A, Von Martens H J. Measurement of angular accelerations, angular velocities and rotational angles by grating interferometry [J]. Measurement, 1998, 24(1): 21-32.

[12] Smutny L, Tuma J, Farana R. Calibration of sensors for angular vibration measurements[C]//Proceedings of Metrology for a Sustainable Development. Budapest: XIX IMEKO World Congress, 2006.

[13] Sun H W, Fang J C, Sheng W. Calibration compensation method for micro inertial measurement unit based on MEMS[J]. Journal of Beijing University of Aeronautics and Astronautics, 2008, 34(4): 439-442 (in Chinese). 孙宏伟, 房建成, 盛蔚. 一种基于MEME的微惯性测量单元标定补偿方法[J]. 北京航空航天大学学报, 2008, 34(4): 439-442.

[14] Xue J F, Shao X H. Electric angular vibration table: China, ZL200610099077.4 [P]. 2007-01-24 (in Chinese). 薛景锋, 邵新慧. 电动式角振动台: 中国, ZL200610099077.4[P]. 2007-01-24.

[15] Xue J F, Shao X H, Peng J. Non-motor electric angular vibration table: China, ZL200610099078.9 [P]. 2008-07-23 (in Chinese). 薛景锋, 邵新慧, 彭军. 非电机式电动式角振动台: 中国, ZL200610099078.9 [P]. 2008-07-23.

[16] Xue J F, Zhao W Q, Shao X H. High-frequency angular vibration exciter design and key technology[J]. Journal of Chinese Inertial Technology, 2013, 21(6): 840-844 (in Chinese). 薛景锋, 赵维谦, 邵新慧. 高频角振动激励源设计与关键技术[J]. 中国惯性技术学报, 2013, 21(6): 840-844.

[17] Zhang L, Peng J. Angular vibration measurement using grating and laser interferometer[C]//Proceedings of SPIE. Bellingham, WA : SPIE, 2006: 63451L-1-63451L-7.

[18] Li X L, Zhang D Z, Xue J F, et al. The measurement method and device of angular vibration by laser interferometry: China, CN100489470C [P]. 2009-05-20 (in Chinese). 李新良, 张大治, 薛景锋, 等. 角振动激光干涉测量方法及装置: 中国, CN100489470C [P]. 2009-05-20.

[19] Xue J F, Zhang D Z, Li X L, et al. High-frequency angular vibration calibration using the mirror assembly diffraction grating heterodyne laser interferometer[C]//Proceedings of SPIE. Bellingham, WA : SPIE, 2014: 928219-1-928219-6.

[20] Bai W P, Yang J F, Han P F, et al. Research on calibration of dynamic torque loading device[J]. Journal of Vibration, Measurement and Diagnosis, 2007, 27(4): 316-319 (in Chinese). 白文普, 杨俊峰, 韩佩富, 等. 动态扭矩加载器的校定研究[J]. 振动、测试与诊断, 2007, 27(4): 316-319.

E-mail：hkxb@buaa.edu.cn

关于我们

期刊社服务

专业学科

封面文章

友情链接

主管单位：中国科学技术协会主办单位：中国航空学会北京航空航天大学

角振动校准装置研究

Research on angular vibration calibration devices

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价

[1]	李文龙, 吴波, 谢帅. 有起落架布置的翼身整体结构机翼载荷测量技术[J]. 航空学报, 2024, 45(1): 229525-229525.
[2]	任超, 李慧琴, 李天梅, 张建勋, 司小胜. 基于退化模型动态校准的设备剩余寿命预测方法[J]. 航空学报, 2023, 44(19): 228345-228345.
[3]	余建虎. 飞机飞行载荷校准试验约束补偿技术[J]. 航空学报, 2023, 44(19): 227500-227500.
[4]	高丽敏, 欧阳波, 姜衡, 葛宁, 李瑞宇. 快速响应压力敏感涂料截止频率实验研究[J]. 航空学报, 2023, 44(11): 127556-127556.
[5]	黄首清, 刘守文, 翟百臣, 周原, 黄小凯, 秦泰春. 基于综合应力工作态试验和神经网络的CMG失效边界域预测[J]. 航空学报, 2021, 42(4): 524208-524208.
[6]	黄卫权, 方涛, 王宗义. 改进的格网惯导系统无阻尼综合校正方法[J]. 航空学报, 2020, 41(9): 323921-323921.
[7]	陈建平, 徐皓吉, 张勇. 基于通道校准和HMM的机载雷达健康状态评估[J]. 航空学报, 2020, 41(9): 323983-323983.
[8]	孟敏, 蒋献, 贾天娇. 基于虚拟载荷校准试验的襟翼曲柄测载方法[J]. 航空学报, 2020, 41(2): 223408-223408.
[9]	高丽敏, 姜衡, 葛宁, 杨冠华, 赵崇祥. 正弦波型高频动态压力光学校准系统及其应用[J]. 航空学报, 2020, 41(10): 123667-123667.
[10]	张厚喆, 谷德峰, 段晓君, 韦春博. 利用经验正交函数分解的大气密度模式校准方法[J]. 航空学报, 2018, 39(S1): 722263-722263.
[11]	李海涛, 林杰, 韩邦成. 基于ESO的DGVSCMG双框架伺服系统不匹配扰动抑制[J]. 航空学报, 2018, 39(4): 421641-421641.
[12]	徐泽远, 伊国兴, 魏振楠, 赵万良. 一种半球谐振陀螺谐振子动力学建模方法[J]. 航空学报, 2018, 39(3): 221624-221624.
[13]	赵坤, 曹登庆, 黄文虎. 基于控制力矩陀螺的BTT飞行器协调转弯控制[J]. 航空学报, 2017, 38(9): 321096-321096.
[14]	杜钰锋, 林俊, 马护生, 梁锦敏. 可压缩流体恒温热线风速仪校准方法[J]. 航空学报, 2017, 38(6): 120600-120600.
[15]	赵琳, 谢睿达, 刘源, 郝勇. 星敏感器低频误差与陀螺漂移离线校正方法[J]. 航空学报, 2017, 38(5): 320552-320552.