高超声速飞行器机体/推进一体化设计的启示

doi:10.7527/S1000-6893.2014.0226

总体气动与综合

本期目录 | 过刊浏览 | 高级检索

前一篇 | 后一篇

高超声速飞行器机体/推进一体化设计的启示

罗金玲¹, 李超¹, 徐锦²

1. 北京空天技术研究所, 北京 100074;
2. 北京机电工程研究所, 北京 100074

收稿日期:2014-06-11 修回日期:2014-10-08 出版日期:2015-01-15 发布日期:2015-01-24
通讯作者: 罗金玲,Tel.: 010-68191238 E-mail: 13601293188@139.com E-mail:13601293188@139.com
作者简介:罗金玲女, 博士, 研究员。主要研究方向: 飞行器设计。 Tel: 010-68191238 E-mail: 13601293188@139.com
基金资助:
国家级项目

Inspiration of hypersonic vehicle with airframe/propulsion integrated design

LUO Jinling¹, LI Chao¹, XU Jin²

1. Beijing Aerospace Technology Institute, Beijing 100074, China;
2. Beijing Electro-Mechanical Engineering Institute, Beijing 100074, China

Received:2014-06-11 Revised:2014-10-08 Online:2015-01-15 Published:2015-01-24
Supported by:
National Level Project

摘要/Abstract

摘要：

机体/推进一体化设计是吸气式高超声速飞行器的关键技术。飞行器的前体和后体既是主要的气动型面,又是发动机进气道的外压缩型面和尾喷管的膨胀型面,一体化设计直接影响飞行器的气动与发动机性能。本文阐述了吸气式高超声速飞行器的主要特点,梳理了飞行器的推阻匹配、升阻比特性、操稳匹配等主要气动设计问题。通过对国外典型高超声速飞行器机体/推进一体化设计技术的综合分析,总结了前体/进气道、后体/尾喷管、边界层强制转捩装置等关键部件的气动设计方法,获得了有意义的启示,可为后续吸气式高超声速技术研究提供重要参考。

关键词: 高超声速飞行器, 机体/推进一体化设计, 前体/进气道, 后体/尾喷管, 强制转捩装置

Abstract:

Airframe/propulsion integrated design is the key technology for hypersonic vehicles. The fore-body and the after-body of vehicles are not only aerodynamic surface, but also either the external-compression surface of engine inlet or the expansion surface of rear nozzle. Hence airframe/propulsion integrated design directly affects aerodynamic characteristics and performances of propulsion. In this paper, the main characteristics of hypersonic vehicle is introduced and crucial aerodynamics issues such as thrust matching with drag and lift-to-drag ratio, as well as maneuverability matching with stability etc., are reviewed. Through a comprehensive analysis of airframe/propulsion integrated design techniques, based on foreign typical hypersonic vehicles and aerodynamic design methods of critical components, the fore-body/inlet integration, after-body/nozzle integration and forced boundary-layer transition device etc., are summarized and some valuable inspirations are obtained. The conclusions could provide important references for the investigation of air-breathing hypersonic technology.

Key words: hypersonic vehicle, airframe/propulsion integrated design, fore-body/inlet, after-body/nozzle, forced transition device

中图分类号:

罗金玲, 李超, 徐锦. 高超声速飞行器机体/推进一体化设计的启示[J]. 航空学报, 2015, 36(1): 39-48.

LUO Jinling, LI Chao, XU Jin. Inspiration of hypersonic vehicle with airframe/propulsion integrated design[J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2015, 36(1): 39-48.

参考文献

[1] Wei Y Y, Liu P, Zhang D Q, et al. Development of foreign hypersonic technology and analysis of flight tests[J]. Winged Missiles Journal, 2010(5): 2-9 (in Chinese). 魏毅寅, 刘鹏, 张冬青, 等.国外高超声速技术发展及飞行试验情况分析[J].飞航导弹, 2010(5): 2-9.

[2] Joyce P J, Pomroy J B. The Hyper-X launch vehicle: challenges and design considerations for hypersonic flight testing, AIAA-2005-3333[R]. Reston: AIAA, 2005.

[3] Hank J M, Murphy J S, Mutzman R C. The X-51A scramjet engine flight demonstration program, AIAA-2008-2540[R]. Reston: AIAA, 2008.

[4] Mutzman R, S Murphy. X-51 development: a chief engineer's perspective[C]//17th AIAA International Space Planes and Hypersonic Systems and Technologies Conference. Reston: AIAA, 2011.

[5] Richardson D. Causes sought for X-51A failure[J]. Jane's Missiles & Rockets, 2012.

[6] Jennings G. Waverider set for third hypersonic test-flight[J]. Jane's Missiles & Rockets, 2012.

[7] Richardson D. Fourth X-51A Waverider sustains Mach 5.1 for six minutes[J]. Jane's Missiles & Rockets, 2013.

[8] Luo J L, Xu M, Liu J. Research on lift and drag characteristics for the integrated configuration of hypersonic vehicle[J]. Journal of Astronautics, 2007, 28(6): 1478-1481 (in Chinese). 罗金玲, 徐敏, 刘杰. 一体化外形的高超声速飞行器升阻特性研究[J]. 宇航学报, 2007, 28(6): 1478-1481.

[9] Reubush D E, Nguyen L T, Rausch V L. Review of X-43A return to flight activities and current status, AIAA-2003-7085[R]. Reston: AIAA, 2003.

[10] Heiser W H, Pratt D T. Hypersonic airbreathing propulsion: AIAA education series[M]. Washington, D. C.: AIAA Inc., 1994: 39.

[11] Anderson J D. Hypersonic waveriders:where do we stand, AIAA-1993-0399[R]. Reston: AIAA, 1993.

[12] Berry S, Daryabeigi K. Boundary layer transition on X-43A, AIAA-2008-3736[R]. Reston: AIAA, 2008.

[13] Seddon J, Goldsmith E L. Intake aerodynamics[M]. London: Blackwell Science Ltd., 1985: 5-15.

[14] Engelund W C, Holland S D, Cockrell C E, Jr. Aerodynamic database development for the Hyper-X airframe integrated scramjet propulsion experiments, AIAA-2000-4006 [R]. Reston: AIAA, 2000.

[15] Berry S A, Auslender A H, Dilley A D. Hypersonic boundary-layer trip development for Hyper-X, AIAA-2000-4012[R]. Reston: AIAA, 2000.

[16] Wadhams T P, MacLean M G, Holden M S. A review of transition studies on full-scale flight vehicles at duplicated flight conditions in the LENS tunnels and comparisons with prediction methods and flight measurement, AIAA-2010-1246[R]. Reston: AIAA, 2010.

E-mail：hkxb@buaa.edu.cn

关于我们

期刊社服务

专业学科

封面文章

友情链接

主管单位：中国科学技术协会主办单位：中国航空学会北京航空航天大学

高超声速飞行器机体/推进一体化设计的启示

Inspiration of hypersonic vehicle with airframe/propulsion integrated design

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价

[1]	杨博, 于贺, 樊子辰. 微观能量分析气动光学效应时变误差的方法[J]. 航空学报, 2024, 45(4): 128703-128703.
[2]	倪炜霖, 王永海, 徐聪, 赤丰华, 梁海朝. 基于强化学习的高超飞行器协同博弈制导方法[J]. 航空学报, 2023, 44(S2): 729400-729400.
[3]	马平, 张宁, 石安华, 于哲峰, 梁世昌, 黄洁. 典型微波波段信号在模拟等离子体中的传输特性[J]. 航空学报, 2023, 44(S2): 729476-729476.
[4]	陈浩宇, 王彬文, 宋巧治, 李晓东. 热颤振地面模拟试验技术[J]. 航空学报, 2023, 44(8): 227295-227295.
[5]	韩荣, 刘伟, 杨小亮. 高超声速飞行器自适应减阻盘动态减阻机理[J]. 航空学报, 2023, 44(4): 126633-126633.
[6]	王梓伊, 张伟伟, 刘磊, 杨肖峰. 适用于复杂流动的热气动弹性降阶建模方法[J]. 航空学报, 2023, 44(4): 126807-126807.
[7]	王忠森, 廖宇新, 魏才盛, 戴婷. 高超声速飞行器快速终端滑模保性能容错控制[J]. 航空学报, 2023, 44(24): 328476-328476.
[8]	闫循良, 王培臣, 王舒眉, 杨宇轩, 王宽. 基于混沌多项式的RBCC飞行器上升段鲁棒轨迹快速优化[J]. 航空学报, 2023, 44(21): 528349-528349.
[9]	孙志坤, 史志伟, 张伟麟, 李铮, 孙琪杰. 等离子体激励器对高速翼型升阻特性的影响[J]. 航空学报, 2022, 43(S2): 23-39.
[10]	郑辉, 邱雷, 袁慎芳, 杨晓飞, 卢绪龙, 薛兆鹏. C/C热防护结构高温气流损伤导波监测实验方法[J]. 航空学报, 2022, 43(8): 225659-225659.
[11]	刘强, 涂国华, 罗振兵, 陈坚强, 赵瑞, 袁先旭. 延迟高超声速边界层转捩技术研究进展[J]. 航空学报, 2022, 43(7): 25357-025357.
[12]	孙聪. 高超声速飞行器强度技术的现状、挑战与发展趋势[J]. 航空学报, 2022, 43(6): 527590-527590.
[13]	罗世彬, 庙智超, 宋佳文. 高超声速飞行器前缘主动冷却影响因素[J]. 航空学报, 2022, 43(12): 627023-627023.
[14]	刘智侃, 刘深深, 刘骁, 曾磊, 代光月. 基于物理量梯度修正的RBF数据传递方法[J]. 航空学报, 2021, 42(7): 124506-124506.
[15]	高昌, 李正洲, 黄江涛, 贺元元, 吴颖川, 乐嘉陵, 桂丰. 基于连续伴随方法的高超声速飞行器高精度气动优化[J]. 航空学报, 2021, 42(7): 124490-124490.