| [1] Tongue S, Swartley V, Dingell C W. The porous plate sublimator as the X-38/CRV (Crew Return Vehicle) orbital heat sink//29th International Conference on Environmental Systems, 1997: 1-5.[2] Wilson J, Lawson B. Investigation into venting and non-venting technologies for the space station freedom extravehicular activity life support system, SAE Technical Paper 901319. 1990.[3] Bouchelle W T, Goodwin F H. Phase 1 engineering and technical data report for the thermal control extravehicular life support system, N75-24360. Washington, D.C.: NASA, 1975.[4] Skoog A I, Abramov I P, Stoklitsky A Y, et al. The Soviet-Russian space suits, a historical overview of the 1960's[J]. Acta Astronautica, 2002, 51(1-9): 113-131.[5] Kuznetz L H. Control of thermal balance by a liquid circulating garment based on a mathematical representation of the human thermoregulatory system. Berkeley: University of California, 1975.[6] Pisacane V L, Kuznetz L H, Logan J S, et al. Thermoregulatory models of safety-for-flight issues for space operations[J]. Acta Astronautica, 2006, 59(7): 531-546.[7] Leimkuehler T O, Stephan R A. Development status of the contaminant insensitive sublimator//38th International Conference on Environmental Systems, 2008.[8] Turner M A. Use of thermal analyses of systems to evolve development projects in spacecraft thermal control concepts, AIAA-1971-0456. Reston: AIAA, 1971.[9] Metts J G, Klaus D M. Equivalent system mass analysis for space suit thermal control, AIAA-2011-5180. Reston: AIAA, 2011.[10] Wu Z Q, Yuan X G, Shen L P. Analysis of water sublimator heat rejection systems[J]. Acta Aeronautica et Astronautica Sinica, 1999, 20(Sup): 16-18. (in Chinese) 吴志强, 袁修干, 沈力平. 水升华器散热系统分析[J]. 航空学报, 1999, 20(增刊): 16-18.[11] Wu Z Q, Yuan X G. Experimental investigation on porous plate water sublimator under constant heat flux[J]. Journal of Beijing University of Aeronautics and Astronautics, 2000, 26(5): 552-555. (in Chinese) 吴志强, 袁修干. 多孔板水升华器在恒热流条件下的试验研究[J]. 北京航空航天大学学报, 2000, 26(5): 552-555.[12] Wu Z Q, Shen L P. Experimental research on the effects of hydrophobic coating porous plates on heat dissipation of water sublimator[J]. Space Medicine & Medical Engineering, 2003, 16(4): 287-291. (in Chinese) 吴志强, 沈力平. 憎水涂层多孔板对水升华器散热性能影响的实验研究[J]. 航天医学与医学工程, 2003, 16(4): 287-291.[13] Li S, Ren J X. Numerical simulation and analysis on the working progress of water sublimator[J]. Journal of Engineering Thermophysics, 2011, 32(2): 291-294. (in Chinese) 李森, 任建勋. 水升华器工作过程的数值模拟与分析[J]. 工程热物理学报, 2011, 32(2): 291-294.[14] Wang Y Y, Zhong Q, Ning X W, et al. Overview of space application and development of water sublimator[J]. Spacecraft Engineering, 2013, 22(3): 105-112. (in Chinese) 王玉莹, 钟奇, 宁献文, 等. 水升华器空间应用研究[J]. 航天器工程, 2013, 22(3): 105-112.[15] Wang Y Y, Zhong Q, Ning X W, et al. Transient study about the heat transfer of sublimator combined with fluid loop//64th International Astronautical Congress, 2013: 23-27. |
CJA
