先进材料及工艺的结构完整性研究进展

doi:10.7527/S1000-6893.2024.29888

综述

本期目录 | 过刊浏览 | 高级检索

前一篇 | 后一篇

先进材料及工艺的结构完整性研究进展

於之杰¹, 郭玉佩²(), 孙汉斌², 张京楠¹, 孙侠生¹

^1.中国航空研究院，北京 100029
^2.中国飞机强度研究所强度与结构完整性全国重点实验室，西安 710065

收稿日期:2023-11-19 修回日期:2024-01-06 接受日期:2024-01-30 出版日期:2024-09-25 发布日期:2024-03-11
通讯作者: 郭玉佩 E-mail:xuejibingxian@163.com
基金资助:
航空科学基金(2023M053004002)

Recent progress in structural integrity of novel materials and advanced techniques

Zhijie YU¹, Yupei GUO²(), Hanbin SUN², Jingnan ZHANG¹, Xiasheng SUN¹

^1.Chinese Aeronautical Establishment，Beijing 100029，China
^2.National Key Laboratory of Strength and Structural Integrity，Aircraft Strength Research Institute of China，Xi’an 710065，China

Received:2023-11-19 Revised:2024-01-06 Accepted:2024-01-30 Online:2024-09-25 Published:2024-03-11
Contact: Yupei GUO E-mail:xuejibingxian@163.com
Supported by:
Aeronautical Science Foundation of China(2023M053004002)

摘要/Abstract

摘要：

结构完整性是决定航空结构安全与寿命的主要因素，也是制约新材料、新结构、新工艺等有望提升航空结构效率的新技术在航空领域应用的重要问题。明确并提升先进材料及工艺的结构完整性性能有助于航空结构进一步利用新材料、新结构、新工艺的优异特点，实现航空结构更可靠、更高效、更经济的目标。本文主要梳理了航空疲劳与结构完整性国际委员会（ICAF）成员国近年在这一领域中的主要工作和所取得的成果，重点介绍了近年来在新材料、新结构、新工艺的疲劳寿命方面国内外各领域学者所取得的新进展，以促进国内航空材料与结构工作者持续关注航空疲劳与结构完整性方面的问题与进展。在此基础上，结合近年来材料结构和工艺领域取得的突破和航空结构性能的新需求，对新材料、新结构、新工艺的结构完整性研究和未来航空结构的设计工作提出了建议和展望，以促进航空结构完整性的研究和性能的进一步提升。

关键词: 航空结构, 先进材料, 先进工艺, 结构完整性, 疲劳寿命

Abstract:

Structural integrity is not only the primary factor determining the safety and lifespan of aeronautical structures， but poses significant challenge to the application of novel materials， structures， and techniques in the field of aviation. Clarifying and enhancing the structural integrity performance of advanced materials and structures can facilitate the utilization of the outstanding capabilities in aviation structures， thereby achieving more reliable， efficient， and economical aviation structural goals. The present paper systematically reviews the main achievements and recent work conducted by member countries of the International Committee on Aeronautical Fatigue and Structural Integrity （ICAF） in the past years of this field. Moreover， this paper introduces the recent advancements made by scholars from various fields in terms of the fatigue life of advanced materials， structures， and techniques， to stimulate continuous attention of researchers in aeronautical structural field towards the progress and issues on the aviation structural integrity. On this basis， combining with the extensive progress made in material， structural， and techniques domains in recent years， along with emerging demands for aeronautical structural performance， this paper also presents suggestions and prospects for the fatigue research of novel materials， structures， and techniques， as well as the design of future aeronautical structures， in order to further promote the development of this field.

Key words: aeronautical structures, advanced materials, advanced techniques, structure integrity, fatigue life

中图分类号:

V215.5

於之杰, 郭玉佩, 孙汉斌, 张京楠, 孙侠生. 先进材料及工艺的结构完整性研究进展[J]. 航空学报, 2024, 45(18): 29888.

Zhijie YU, Yupei GUO, Hanbin SUN, Jingnan ZHANG, Xiasheng SUN. Recent progress in structural integrity of novel materials and advanced techniques[J]. Acta Aeronautica et Astronautica Sinica, 2024, 45(18): 29888.

图/表 11

图 1

图 2

图 3

图 4

图 5

图 6

图 7

图 8

图 9

图 10

图 11

参考文献 104

1	王彬文，陈先民，苏运来，等. 中国航空工业疲劳与结构完整性研究进展与展望［J］. 航空学报， 2021， 42（5）： 524651.
	WANG B W， CHEN X M， SU Y L， et al. Progress and prospect of fatigue and structural integrity research in China’s aviation industry［J］. Acta Aeronautica et Astronautica Sinica， 2021， 42（5）： 524651 （in Chinese）.
2	孙侠生，苏少普，孙汉斌，等. 国外航空疲劳研究现状及展望［J］. 航空学报， 2021， 42（5）： 524791.
	SUN X S， SU S P， SUN H B， et al. Current status and prospect of foreign aviation fatigue research［J］. Acta Aeronautica et Astronautica Sinica， 2021， 42（5）： 524791 （in Chinese）.
3	崔德刚，鲍蕊，张睿，等. 飞机结构疲劳与结构完整性发展综述［J］. 航空学报， 2021， 42（5）： 524394.
	CUI D G， BAO R， ZHANG R， et al. Review of the development of aircraft structural fatigue and structural integrity［J］. Acta Aeronautica et Astronautica Sinica， 2021， 42（5）： 524394 （in Chinese）.
4	孙侠生，李小飞. 与时偕行：航空科技国际交流与合作［M］. 北京：航空工业出版社， 2021： 249-263.
	SUN X S， LI X F. Keeping pace with the times： International exchange and cooperation in aviation technology［M］. Beijing： Aviation Industry Press， 2021： 249-263 （in Chinese）.
5	NEZHADFAR P D， THOMPSON S， SAHARAN A， et al. Structural integrity of additively manufactured aluminum alloys： Effects of build orientation on microstructure， porosity， and fatigue behavior［J］. Additive Manufacturing， 2021， 47： 102292.
6	MAIN B， DIXON B， JONES M， et al. Microstructure and surface finish influences on AA7085-T7452 small fatigue crack growth rates［J］. Engineering Failure Analysis， 2022， 141： 106628.
7	MAIN B， JONES M， DIXON B， et al. On small fatigue crack growth rates in AA7085-T7452［J］. International Journal of Fatigue， 2022， 156： 106704.
8	NEWMAN J C， WALKER K F. Fatigue crack growth on several materials under single-spike overloads and aircraft spectra during constraint-loss behavior［J/OL］. Materials Performance and Characterization，（2024-01-26）［2024-02-20］. .
9	GUILLAUME M. National review of Switzerland［C］∥Proceedings of 31st Symposium of International Committee on Aeronautical Fatigue and Structural Integrity. 2023.
10	DASH S S， LI D J， ZENG X Q， et al. Cyclic deformation behavior and fatigue life prediction of an automotive cast aluminum alloy： a new method of determining intrinsic fatigue toughness［J］. Fatigue & Fracture of Engineering Materials & Structures， 2022， 45（3）： 725-738.
11	DASH S S， LI D J， ZENG X Q， et al. Heterogeneous microstructure and deformation behavior of an automotive grade aluminum alloy［J］. Journal of Alloys and Compounds， 2021， 870： 159413.
12	DASH S S， LI D J， ZENG X Q， et al. Low-cycle fatigue behavior of Silafont®-36 automotive aluminum alloy： Effect of negative strain ratio［J］. Materials Science and Engineering： A， 2022， 852： 143701.
13	SCHIMBÄCK D， MAIR P， KASERER L， et al. An improved process scan strategy to obtain high-performance fatigue properties for Scalmalloy®［J］. Materials & Design， 2022， 224： 111410.
14	FANTERIA D. National review of Italy［C］∥Proceedings of 31st Symposium of International Committee on Aeronautical Fatigue and Structural Integrity. 2023.
15	LIN S， DENG Y L， TANG J G， et al. Microstructures and fatigue behavior of metal-inert-gas-welded joints for extruded Al-Mg-Si alloy［J］. Materials Science and Engineering： A， 2019， 745： 63-73.
16	YANG G， LI S， FU D. Fatigue properties of AL/AL-MG alloy laminated materials for the applications to railway tank cars［J］. International Journal of Fatigue， 2019， 122： 173-183.
17	CORDEIRO R M. O efeito de retardo devido a sobrecargas na propagação de trinca por fadiga （in Portuguese）［D］. São José dos Campos： Aeronautics Institute of Technology， 2021： 9-10.
18	MAGALHÃES A. Crack growth retardation models under load interaction［D］. São José dos Campos： Aeronautics Institute of Technology， 2022： 1.
19	STONAKER K， BAKUCKAS J R， ZHANG T， et al. Characterization of MSD in emerging metallic structures in fuselage lap joints［C］∥Proceedings of 31st Symposium of International Committee on Aeronautical Fatigue and Structural Integrity. 2023： 101.
20	CHAVES C. National review of Brazil［C］∥Proceedings of 31st Symposium of International Committee on Aeronautical Fatigue and Structural Integrity. 2023.
21	WANG B W， QIAN C C， BAI C Y， et al. Study on impact fatigue test and life prediction method of TC18 titanium alloy［J］. International Journal of Fatigue， 2023， 168： 107391.
22	WANG X， LI S， HAN Y， et al. Visual assessment of special rod-like α-Ti precipitates within the in situ TiC crystals and the mechanical responses of titanium matrix composites［J］. Composites Part B： Engineering， 2022， 230： 109511.
23	KONGSHAVN I， BARTER S A， SORENSEN L. Measuring small fatigue crack growth with the aid of marker bands in recrystallized annealed Ti6Al4V［C］∥Proceedings of 31st Symposium of International Committee on Aeronautical Fatigue and Structural Integrity. 2023.
24	ALMEIDA G M J， CARDOSO R A， GARCIA M A， et al. Four actuators fretting fatigue rig and tests with cyclic normal load for Ti-6Al-4V［J］. Theoretical and Applied Fracture Mechanics， 2022， 119： 103292.
25	ODAKA T. National review of Japan［C］∥Proceedings of 31st Symposium of International Committee on Aeronautical Fatigue and Structural Integrity. 2023.
26	SUZUKI S， SAKAGUCHI M. Fatigue crack retardation associated with creep deformation induced by a tension hold in a single crystal Ni-base superalloy［J］. Scripta Materialia， 2020， 178： 346-350.
27	DE LUCA D M， HAMILTON A R， REED P A S. Influence of build orientation on high temperature fatigue crack growth mechanisms in Inconel 718 fabricated by laser powder bed fusion： Effects of temperature and hold time［J］. International Journal of Fatigue， 2023， 170： 107484.
28	YANG Y F， HU H Y， MIN L， et al. Failure mechanism and life correlation of Inconel 718 in high and very high cycle fatigue regimes［J］. International Journal of Fatigue， 2023， 175： 107764.
29	ZHAO Y， JIANG R， HARTE A， et al. Characterisation of strain localisation under cyclic loading at 450 ℃ by SEM-DIC in a PM Ni-based superalloy［J］. Materials Science and Engineering： A， 2022， 849： 143464.
30	KIM D， JIANG R， REED P A S. Microstructural and oxidation effects on fatigue crack initiation mechanisms in a turbine disc alloy［J］. Journal of Materials Science， 2023， 58（4）： 1869-1885.
31	TAN Y G， BULL D J， JIANG R， et al. Data rich imaging approaches assessing fatigue crack initiation and early propagation in a DS superalloy at room temperature［J］. Materials Science and Engineering： A， 2021， 805： 140592.
32	TAN Y， GAO N， REED P. Oxidation induced crack closure in a nickel base superalloy： A novel phenomenon and mechanism assessed via combination of 2D and 3D characterization［J］. Materials Science and Engineering： A， 2022， 861： 144311.
33	田甜，郝志博，贾崇林，等. 新型第三代粉末高温合金FGH100L的显微组织与力学性能［J］. 金属学报， 2019， 55（10）： 1260-1272.
	TIAN T， HAO Z B， JIA C L， et al. Microstructure and properties of a new third generation powder metallurgy superalloy FGH100L［J］. Acta Metallurgica Sinica， 2019， 55（10）： 1260-1272 （in Chinese）.
34	DONG J， LI J. Effect of femtosecond laser drilling on the fatigue properties of the third-generation single-crystal superalloy DD9［J］. Journal of Materials Engineering and Performance， 2023， 32： 7428-7438.
35	PATRICK M A， LALIBERTÉ J F， WANG X. Investigation of the tensile/compressive residual stresses in AISI 4340 steel under low-cycle fatigue loading［C］∥Proceedings of 31st Symposium of International Committee on Aeronautical Fatigue and Structural Integrity. 2023： 57.
36	涂强，范海平. YG8硬质合金冲击疲劳断口形貌及冲击寿命统计分析方法［J］. 热加工工艺， 2022， 51（6）： 74-78.
	TU Q， FAN H P. Impact fatigue fracture morphology and statistical analysis method of impact life for YG8 cemented carbide［J］. Hot Working Technology， 2022， 51（6）： 74-78 （in Chinese）.
37	LIU W， CHENG Y， SUI H， et al. Microstructure-based intergranular fatigue crack nucleation model： Dislocation transmission versus grain boundary cracking［J］. Journal of the Mechanics and Physics of Solids， 2023， 173： 105233.
38	LI S， WU X， LIU R， et al. Full-range fatigue life prediction of metallic materials using Tanaka-Mura-Wu model［J］. SAE International Journal of Materials and Manufacturing， 2022， 15（2）： 133-154.
39	ZHANG H， SONG Z， ZHANG L， et al. Effect of hygrothermal environment on the fatigue fracture mechanism of single lap Aluminum-CFRP hybrid （riveted/bonded） joints［J］. International Journal of Fatigue， 2022， 165： 107177.
40	FREED Y. National review of Israel［C］∥Proceedings of 31st Symposium of International Committee on Aeronautical Fatigue and Structural Integrity. 2023.
41	BONI L， FANTERIA D， LAZZERI L， et al. Delamination onset in composite materials due to fatigue loading［J］. Journal of Composite Materials， 2022， 56（16）： 2585-2598.
42	MONTICELI F M. Fadiga em compósitos híbridos processados via RTM： influência da interface híbrida na delaminação nos modos I e II（in Portuguese）［D］. São Paulo： State University of São Paulo， 2021： 78-86.
43	TU W J， PASCOE J A， ALDERLIESTEN R C. Experimental investigation of planar delamination behaviour of composite laminates under out-of-plane loading［C］∥Proceedings of 31st Symposium of International Committee on Aeronautical Fatigue and Structural Integrity. 2023： 22.
44	BIAGINI D， PASCOE J A， ALDERLIESTEN R C. Experimental investigation of fatigue after impact damage growth in CFRP［J］. Procedia Structural Integrity， 2022， 42： 343-350.
45	VAN DER PANNE M， PASCOE J A. Fatigue delamination growth-Is UD testing enough？［J］. Procedia Structural Integrity， 2022， 42： 449-456.
46	BIAGINI D， PASCOE J A， ALDERLIESTEN R. Investigation of compression after impact failure in carbon fiber reinforced polymers using acoustic emission［J］. Journal of Composite Materials， 2023， 57（10）： 1819–1832.
47	SUN X S. National review of China［C］∥Proceedings of 31st Symposium of International Committee on Aeronautical Fatigue and Structural Integrity. 2023.
48	GONÇALVES V O， OSSES M， PARDINI L C. New jig adapted for compression fatigue tests on composite materials［J］. Journal of Composite Materials， 2023， 57（2）： 337-344.
49	GONÇALVES V O. Evaluation of static and fatigue strength in carbon fiber/epoxy composites with different levels of porosity under compression load［D］. São José dos Campos： Aeronautics Institute of Technology， 2022： 23-25.
50	SILVA T C， MORAES D V O， MORGADO G F M， et al. Mechanical characterization and fractographic study of the carbon/PEI composite under static and fatigue loading［J］. Mechanics of Advanced Materials and Structures， 2022： 1-9.
51	PANTUSO F. A Model for predicting the fatigue life of functionally graded additively manufactured metal components［D］. Kingston： Royal Military College of Canada， 2023： 49-58.
52	YAZDANI SARVESTANI H， BEAUSOLEIL C， GENEST M， et al. Architectured ceramics with tunable toughness and stiffness［J］. Extreme Mechanics Letters， 2020， 39： 100844.
53	SARVESTANI H Y， VAN EGMOND D A， ESMAIL I， et al. Bioinspired stochastic design： tough and stiff ceramic systems［J］. Advanced Functional Materials， 2022， 32（6）： 2108492.
54	RAHIMIZADEH A， YAZDANI SARVESTANI H， LI L， et al. Engineering toughening mechanisms in architectured ceramic-based bioinspired materials［J］. Materials & Design， 2021， 198： 109375.
55	LIAO M. National review of Canada［C］∥Proceedings of 31st Symposium of International Committee on Aeronautical Fatigue and Structural Integrity. 2023.
56	SURESH S， LINDSTRÖM S B， THORE C J， et al. Topology optimization using a continuous-time high-cycle fatigue model［J］. Structural and Multidisciplinary Optimization， 2020， 61： 1011-1025.
57	SURESH S， LINDSTRÖM S B， THORE C J， et al. Topology optimization for transversely isotropic materials with high-cycle fatigue as a constraint［J］. Structural and Multidisciplinary Optimization， 2021， 63： 161-172.
58	HOMBERGSMEIER E. National review of Germany［C］∥Proceedings of 31st Symposium of International Committee on Aeronautical Fatigue and Structural Integrity. 2023.
59	FÉLIX P H W， ARBELO M A. Crack growth analysis of fiber metal laminates stiffened panels［C］∥Proceedings of 31st Symposium of International Committee on Aeronautical Fatigue and Structural Integrity. 2023： 146.
60	BELEM F R. Post-buckling fatigue crack propagation on curved stiffened panels［D］. São José dos Campos： Aeronautics Institute of Technology， 2022： 1.
61	MAIN B. National review of Australia［C］∥Proceedings of 31st Symposium of International Committee on Aeronautical Fatigue and Structural Integrity. 2023.
62	TOUZET L. National review of France［C］∥Proceedings of 31st Symposium of International Committee on Aeronautical Fatigue and Structural Integrity. 2023.
63	BHUJANGRAO T， VEIGA F， SUÁREZ A， et al. High-temperature mechanical properties of IN718 alloy： Comparison of additive manufactured and wrought samples［J］. Crystals， 2020， 10（8）： 689.
64	CHI W， LI G， WANG W， et al. Interior initiation and early growth of very high cycle fatigue crack in an additively manufactured Ti-alloy［J］. International Journal of Fatigue， 2022， 160： 106862.
65	LIU B， CHEN B， LU S， et al. Investigations into gas-pore effects on fatigue strength with a peridynamic approach［J］. Aerospace， 2022， 9（11）： 641.
66	YI M， XUE M， CONG P L， et al. Machine learning for predicting fatigue properties of additively manufactured materials［J/OL］. Chinese Journal of Aeronautics，（2023-11-07）［2024-02-20］. .
67	DANG L， HE X， TANG D， et al. A fatigue life posterior analysis approach for laser-directed energy deposition Ti-6Al-4V alloy based on pore-induced failures by kernel ridge［J］. Engineering Fracture Mechanics， 2023， 289： 109433.
68	DANG L， HE X， TANG D， et al. A fatigue life prediction approach for laser-directed energy deposition titanium alloys by using support vector regression based on pore-induced failures［J］. International Journal of Fatigue， 2022， 159： 106748.
69	SHAMIR M， ZHANG X， SYED A K， et al. Predicting the effect of surface waviness on fatigue life of a wire+ arc additive manufactured Ti-6Al-4V alloy［J］. Materials， 2023， 16： 5355.
70	SYED A K， PLASKITT R， HILL M， et al. Strain controlled fatigue behaviour of a wire + arc additive manufactured Ti-6Al-4V［J］. International Journal of Fatigue， 2023， 171： 107579.
71	HALLAM D. National review of UK［C］∥Proceedings of 31st Symposium of International Committee on Aeronautical Fatigue and Structural Integrity. 2023.
72	GADALIŃSKA E， PAWLISZAK Ł， MONETA G. Laser powder bed fusion and selective laser melted components investigated with highly penetrating radiation［J］. Fatigue of Aircraft Structures， 2021， 2021（13）： 81-98.
73	MADEJSKI B， MALICKI M， CZARNEWICZ S， et al. Microstructural and mechanical properties of selective laser melted Inconel 718 for different specimen sizes［J］. Fatigue of Aircraft Structures， 2020， 2020（12）： 15-26.
74	CHMIELEWSKA A， WYSOCKI B A， GADALIŃSKA E， et al. Laser powder bed fusion （LPBF） of NiTi alloy using elemental powders： the influence of remelting on printability and microstructure［J］. Rapid Prototyping Journal， 2022， 28（10）： 1845-1868.
75	ZHANG Z， LI D， LI S， et al. Effect of direct aging treatment on microstructure， mechanical and corrosion properties of a Si-Zr-Er modified Al-Zn-Mg-Cu alloy prepared by selective laser melting technology［J］. Materials Characterization， 2022， 194： 112459.
76	MATIAS C， DISKIN A， GOLAN O， et al. Ti-6AL-4V additive manufacturing measure of quality according to fatigue crack initiation vs. crack propagation［C］∥2022 Symposium of International Council of the Aeronautical Sciences. 2022.
77	WU X， KANZ P， MAHMOUD H， et al. Characterization of the microstructure and surface roughness effects on fatigue life using the Tanaka-Mura-Wu model［J］. Applied Sciences， 2021， 11（21）： 9955.
78	PENG D， JONES R， ANG A S， et al. Computing the durability of WAAM 18Ni 250 maraging steel specimens［J］. Fatigue & Fracture of Engineering Materials & Structures， 2022， 45（12）： 3535-3545.
79	VIITANEN T. National review of Finland［C］∥Proceedings of 31st Symposium of International Committee on Aeronautical Fatigue and Structural Integrity. 2023.
80	孙诗誉，栗晓飞. 增材制造零件适航审定路径分析及启示［J］. 航空科学技术， 2021， 32（10）： 42-48.
	SUN S Y， LI X F. analysis of airworthiness certification path for additively manufactured parts and its implications［J］. Aviation Science and Technology， 2021， 32（10）： 42-48 （in Chinese）.
81	KASHAEV N， KELLER S， STARON P， et al. On the prediction of fatigue crack growth based on weight functions in residual stress fields induced by laser shock peening and laser heating［J］. Fatigue & Fracture of Engineering Materials & Structures， 2021， 44（12）： 3463-3481.
82	KASHAEV N， VENTZKE V， HORSTMANN M， et al. Effects of laser shock peening on the microstructure and fatigue crack propagation behaviour of thin AA2024 specimens［J］. International Journal of Fatigue， 2017， 98： 223-233.
83	TOURSANGSARAKI M， WANG H， HU Y， et al. Crystal plasticity modeling of laser peening effects on tensile and high cycle fatigue properties of 2024-T351 aluminum alloy［J］. Journal of Manufacturing Science and Engineering， 2021， 143（7）： 071015.
84	Technologies Brochure LSP. Laser peen process［EB/OL］. （2017-01-01）［2024-02-20］. .
85	GUJBA A K， MEDRAJ M. Laser peening process and its impact on materials properties in comparison with shot peening and ultrasonic impact peening［J］. Materials， 2014， 7（12）： 7925-7974.
86	CARVALHO C P， LIMA M S F， PASTOUKHOV V， et al. Investigation of laser treatment as a method for fatigue crack growth retardation in aluminum alloy 2198-T851［J］. Metals， 2021， 11（12）： 2034.
87	BAPTISTA C A， ANTUNES A M， HEIN L R， et al. Effects of the secondary aging heat treatment T6I4 on fracture toughness and fatigue crack growth resistance of AA7050 alloy［C］∥Proceedings of 31st Symposium of International Committee on Aeronautical Fatigue and Structural Integrity. 2023： 78.
88	SANCHEZ A G， LEERING M， GLASER D， et al. Effects of ablative and non-ablative laser shock peening on AA7075-T651 corrosion and fatigue performance［J］. Materials Science and Technology， 2021， 37（12）： 1015-1034.
89	SANCHEZ A G， YOU C， LEERING M， et al. Effects of laser shock peening on the mechanisms of fatigue short crack initiation and propagation of AA7075-T651［J］. International Journal of Fatigue， 2021， 143： 106025.
90	YOU C， SANCHEZ A G， LEERING M， et al. The effects of surface pits and intermetallics on the competing failure modes in laser shock peened AA7075-T651： Experiments and modelling［J］. International Journal of Fatigue， 2022， 155： 106568.
91	YE Y， ZHANG Y， HUANG T， et al. A critical review of laser shock peening of aircraft engine components［J］. Advanced Engineering Materials， 2023， 25（16）： 2201451.
92	BEHJAT A， SHAMANIAN M， TAHERIZADEH A， et al. Microstructure-electrochemical behavior relationship in post processed AISI316L stainless steel parts fabricated by laser powder bed fusion［J］. Journal of Materials Research and Technology， 2023， 23： 3294-3311.
93	ALDERLIESTEN R. National review of Netherlands［C］∥Proceedings of 31st Symposium of International Committee on Aeronautical Fatigue and Structural Integrity. 2023.
94	KAPIDZIC Z. National review of Sweden［C］∥Proceedings of 31st Symposium of International Committee on Aeronautical Fatigue and Structural Integrity. 2023.
95	朱明亮，轩福贞. 焊接结构的疲劳损伤与断裂［M］. 北京：科学出版社， 2022： 1.
	ZHU M L， XUAN F Z. Fatigue damage and fracture of welded structures［M］. Beijing： Science Press， 2022： 1 （in Chinese）.
96	轩福贞，朱明亮，王国彪. 结构疲劳百年研究的回顾与展望［J］. 机械工程学报， 2021， 57（6）： 26-51.
	XUAN F Z， ZHU M L， WANG G B. Review and prospect of a century of structural fatigue research［J］. Journal of Mechanical Engineering， 2021， 57（6）： 26-51 （in Chinese）.
97	ZHANG S， LI X L， ZHANG J F， et al. High cycle fatigue behavior of inertia friction welded joint of FGH96 alloy at high temperature［J］. International Journal of Fatigue， 2023， 176： 107870.
98	HUANG S， LIU J， SHENG J， et al. High-temperature fatigue crack growth characteristics of IN718 Ni-based alloy treated by laser peening［J］. Engineering Fracture Mechanics， 2022， 276： 108922.
99	NIEPOKOLCZYCKI A. National review of Poland［C］∥Proceedings of 31st Symposium of International Committee on Aeronautical Fatigue and Structural Integrity. 2023.
100	KUBIT A， TRZEPIECIŃSKI T， GADALIŃSKA E， et al. Investigation into the effect of RFSSW parameters on tensile shear fracture load of 7075-t6 alclad aluminium alloy joints［J］. Materials， 2021， 14（12）： 3397.
101	MEYGHANI B， WU C. Progress in thermomechanical analysis of friction stir welding［J］. Chinese Journal of Mechanical Engineering， 2020， 33（1）： 1-33.
102	易敏，常珂，梁晨光，等. 增材制造微结构演化及疲劳分散性计算［J］. 力学学报， 2021， 53（12）： 3263-3273.
	YI M， CHANG K， LIANG C G， et al. Microstructure evolution and fatigue dispersion calculation in additive manufacturing［J］. Acta Mechanica Sinica， 2021， 53（12）： 3263-3273 （in Chinese）.
103	於之杰，魏悦广. 固体跨尺度压痕标度律的研究与展望［J］. 力学学报， 2022， 54（8）： 2085-2100.
	YU Z J， WEI Y G. Review on the researches and prospect of the trans-scale indentation scaling law of solids［J］. Chinese Journal of Theoretical and Applied Mechanics， 2022， 54（8）： 2085-2100 （in Chinese）.
104	於之杰，徐碧涵，王向盈，等. 航空增材制造技术中的跨尺度力学研究进展［J］. 航空材料学报， 2023， 43（5）： 1-9.
	YU Z J， XU B H， WANG X Y， et al. Progress of cross-scale mechanics in additive manufacturing technology for aeronautical application［J］. Journal of Aerospace Materials， 2023， 43（5）： 1-9 （in Chinese）.

E-mail：hkxb@buaa.edu.cn

关于我们

期刊社服务

专业学科

封面文章

友情链接

主管单位：中国科学技术协会主办单位：中国航空学会北京航空航天大学

[1]	于宝石, 雷勇军, 申志彬, 张大鹏. 固体发动机药柱结构固化残余应力分析与控制技术[J]. 航空学报, 2025, 46(8): 31083-031083.
[2]	代定强, 周轩, 董雷霆, 孙侠生. 数字工程与数字孪生在航空疲劳与结构完整性领域的研究进展与展望[J]. 航空学报, 2025, 46(19): 531022-531022.
[3]	程容湘, 段国升, 张月盈, 魏贺雨, 武保林. 应力控制下织构对AZ31B疲劳性能的影响[J]. 航空学报, 2025, 46(12): 431401-431401.
[4]	张福泽. 全机日历寿命确定及相关问题[J]. 航空学报, 2024, 45(3): 229863-229863.
[5]	曾旭, 邓德双, 杨红娟, 杨正岩, 马书义, 杨雷, 武湛君. 航空结构低速冲击监测技术研究进展[J]. 航空学报, 2024, 45(23): 30368-030368.
[6]	李洪伟, 雷学林, 张成成, 汤超宗, 康胜龙, 陈亚龙, 程吕一, 张显程. GH4169高温合金孔结构的多级凸包旋转冷扩孔挤压强化工艺参数优化[J]. 航空学报, 2024, 45(16): 429692-429692.
[7]	路来骁, 徐长官, 刘建华, 秦美镇, 吕英波, 阎玉芹. 初始应力状态对薄壁件双侧滚压影响规律[J]. 航空学报, 2023, 44(10): 427415-427415.
[8]	王彬文, 聂小华, 万春华, 吴存利. 全机静强度虚拟试验技术研究及应用[J]. 航空学报, 2022, 43(6): 526273-526273.
[9]	王彬文, 段世慧, 聂小华, 郭瑜超. 航空结构分析CAE软件发展现状与未来挑战[J]. 航空学报, 2022, 43(6): 527272-527272.
[10]	李玉海, 王成波, 陈亮, 董宏达, 管宇, 邸洪亮, 顾宇轩. 先进战斗机寿命设计与延寿技术发展综述[J]. 航空学报, 2021, 42(8): 525791-525791.
[11]	杨正伟, 赵志彬, 李胤, 宋远佳, 寇光杰, 李磊, 程鹏飞. 压-压疲劳载荷下CFRP层合板表面红外辐射特征[J]. 航空学报, 2021, 42(5): 524239-524239.
[12]	张福泽. 求飞机结构真实腐蚀容限的原理和方法[J]. 航空学报, 2021, 42(5): 524457-524457.
[13]	张峻瑞, 郑锡涛, 袁林, 钟贵勇, 李国琛. 基于损伤权重的混合多钉连接件疲劳寿命预测方法[J]. 航空学报, 2021, 42(5): 524306-524306.
[14]	王连庆, 胡雅楠, 车志刚, 吴圣川. 激光冲击强化7075铝合金熔焊接头的疲劳性能[J]. 航空学报, 2021, 42(5): 524320-524320.
[15]	崔德刚, 鲍蕊, 张睿, 刘斌超, 欧阳天. 飞机结构疲劳与结构完整性发展综述[J]. 航空学报, 2021, 42(5): 524394-524394.

先进材料及工艺的结构完整性研究进展

Recent progress in structural integrity of novel materials and advanced techniques

RichHTML

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

图/表 11

参考文献 104

相关文章 15

编辑推荐

Metrics

本文评价