复合材料卫星承力筒连接结构分析

doi:10.7527/S1000-6893.2021.25161

固体力学与飞行器总体设计

本期目录 | 过刊浏览 | 高级检索

前一篇 | 后一篇

复合材料卫星承力筒连接结构分析

于成月^1,2, 刘波¹, 李传政¹, 薛闯¹

1. 中国科学院长春光学精密机械与物理研究所, 长春 130033;
2. 中国科学院大学, 北京 100049

收稿日期:2020-12-25 修回日期:2021-01-11 出版日期:2022-03-15 发布日期:2021-01-26
通讯作者: 刘波 E-mail:刘波,lb.mems@aliyun.com
基金资助:
国家自然科学基金（11903034）

Analytical research on connecting structure of composite material satellite bearing cylinder

YU Chengyue^1,2, LIU Bo¹, LI Chuanzheng¹, XUE Chuang¹

1. Changchun Institute of Optics, Fine Mechanics and Physics, Chinese Academy of Sciences, Changchun 130033, China;
2. University of Chinese Academy of Sciences, Beijing 100049, China

Received:2020-12-25 Revised:2021-01-11 Online:2022-03-15 Published:2021-01-26
Supported by:
National Natural Science Foundation of China (11903034)

摘要/Abstract

摘要： 大型卫星承力筒的连接结构损伤是设计时必须要考虑的关键问题，以某碳纤维复合材料卫星承力筒的连接结构为研究对象，应用ABAQUS有限元软件建立复合材料层合板连接结构渐进损伤模型，并且根据Hashin失效准则及Tserpes材料性能退化准则，应用Fortran语言二次开发了UMAT子程序，研究承力筒层合板螺栓连接及胶螺混合连接的失效机制；在此基础上，利用仿真分析螺栓连接结构的刚度探究对卫星承力筒试验件力学性能的影响。结果表明:利用螺栓连接结构刚度进行仿真建模的卫星承力筒试验件结果更接近试验值，其误差相比于多点约束—MPC单元减小了4%~9%，说明此方法能更好地满足仿真分析要求。该分析方法为复合材料卫星承力筒连接结构的力学性能及多螺栓连接结构的有限元仿真分析提供一定参考，适用于具有连接结构的卫星力学分析。

关键词: 卫星承力筒, 复合材料, 渐进损伤模型, 连接结构, 胶层, 有限元分析

Abstract: The connection structure damage of large satellite bearing cylinders is a key issue requiring consideration in the design.Taking the connection structure of a carbon fiber composite satellite bearing cylinder as the research object, we use the ABAQUS finite element software to establish the progressive damage model of the composite material laminate bolt connection.Based on the Hashin failure criterion and the Tserpes material performance degradation criterion, the Fortran language is adopted to develop the UMAT subroutine for the second time to study the failure mechanism of the bearing cylinder laminate bolt connection and the rubber-screw hybrid connection.In addition, the simulation analysis of the stiffness of the bolted connection structure is used to explore the impact on the mechanical properties of the satellite bearing cylinder test piece.The results show that the simulation of the satellite bearing cylinder test piece using the bolt connection structure stiffness for simulation modeling is closer to the experimental value, and compared with the MPC connection, the error is reduced by 4%-9%, indicating that this method better meets the requirements of simulation analysis.This analysis method provides reference for the mechanical property analysis of the composite satellite bearing cylinder connection structure and finite element simulation analysis of the multi-bolt connection structure, and is applicable for mechanical analysis of satellites with connected structures.

Key words: satellite bearing cylinders, composite, progressive damage model, connection structure, adhesive layer, finite element analysis

中图分类号:

V415

于成月, 刘波, 李传政, 薛闯. 复合材料卫星承力筒连接结构分析[J]. 航空学报, 2022, 43(3): 225161-225161.

YU Chengyue, LIU Bo, LI Chuanzheng, XUE Chuang. Analytical research on connecting structure of composite material satellite bearing cylinder[J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2022, 43(3): 225161-225161.

参考文献

[1] 滕国阳, 周晓军, 杨辰龙, 等.厚截面碳纤维复合材料远表面微缺陷超声检测[J].光学精密工程, 2018, 26(12):3108-3117. TENG G Y, ZHOU X J, YANG C L, et al.Ultrasonic detection method of micro defects in thick-section CFRP[J].Optics and Precision Engineering, 2018, 26(12):3108-3117(in Chinese).
[2] 赫晓东, 王荣国, 彭庆宇, 等.航空航天用纳米碳复合材料研究进展[J].宇航学报, 2020, 41(6):707-718. HE X D, WANG R G, PENG Q Y, et al.Research progress on nano-carbon composites used in aerospace[J].Journal of Astronautics, 2020, 41(6):707-718(in Chinese).
[3] 熊健, 杜昀桐, 杨雯, 等.轻质复合材料夹芯结构设计及力学性能最新进展[J].宇航学报, 2020, 41(6):749-760. XIONG J, DU Y T, YANG W, et al.Research progress on design and mechanical properties of lightweight composite sandwich structures[J].Journal of Astronautics, 2020, 41(6):749-760(in Chinese).
[4] 顾轶卓, 李敏, 李艳霞, 等.飞行器结构用复合材料制造技术与工艺理论进展[J].航空学报, 2015, 36(8):2773-2797. GU Y Z, LI M, LI Y X, et al.Progress on manufacturing technology and process theory of aircraft composite structure[J].Acta Aeronau-tica et Astronautica Sinica, 2015, 36(8):2773-2797(in Chinese).
[5] 赵丽滨, 龚愉, 张建宇.纤维增强复合材料层合板分层扩展行为研究进展[J].航空学报, 2019, 40(1):522509. ZHAO L B, GONG Y, ZHANG J Y.A survey on delamination growth behavior in fiber reinforced composite laminates[J].Acta Aeronautica et Astronautica Sinica, 2019, 40(1):522509(in Chinese).
[6] BRITO C B G, SALES R C M, DONADON M V.Effects of temperature and moisture on the fracture behaviour of composite adhesive joints[J].International Journal of Adhesion and Adhesives, 2020, 100:102607.
[7] 石文静, 高峰, 柴洪友.复合材料在航天器结构中的应用与展望[J].宇航材料工艺, 2019, 49(4):1-6. SHI W J, GAO F, CHAI H Y.Application and expectation of composite in spacecraft structure[J].Aerospace Materials & Technology, 2019, 49(4):1-6(in Chinese).
[8] PAROISSIEN E, LACHAUD F, SCHWARTZ S, et al.Simplified stress analysis of hybrid (bolted/bonded) joints[J].International Journal of Adhesion and Adhesives, 2017, 77:183-197.
[9] 陈坤, 舒茂盛, 胡仁伟, 等.带衬套沉头螺栓复合材料/金属接头拉伸性能[J].北京航空航天大学学报, 2019, 45(3):633-640. CHEN K, SHU M S, HU R W, et al.Tensile performance of countersunk bolted composite/metal joints with sleeve[J].Journal of Beijing University of Aeronautics and Astronautics, 2019, 45(3):633-640(in Chinese).
[10] 刘同, 许希武, 林智育.复合材料厚板多钉连接[J].材料科学与工程学报, 2019, 37(5):768-778. LIU T, XU X W, LIN Z Y.Research on multi-bolt composite laminate joint strength[J].Journal of Materials Science and Engineering, 2019, 37(5):768-778(in Chinese).
[11] MANDAL B, CHAKRABARTI A.Numerical failure assessment of multi-bolt FRP composite joints with varying sizes and preloads of bolts[J].Composite Structures, 2018, 187:169-178.
[12] XU P F, ZHOU Z G, LIU T Z, et al.A novel double-spring analytical model for hybrid GLARE joints:Model development, validation, parameter study and global sensitivity analysis[J].International Journal of Mechanical Sciences, 2020, 177:105606.
[13] XU P F, ZHOU Z G, LIU T Z, et al.The investigation of viscoelastic mechanical behaviors of bolted GLARE joints:Modeling and experiments[J].International Journal of Mechanical Sciences, 2020, 175:105538.
[14] 吴存利, 万春华, 郭瑜超.复合材料结构胶-螺连接区域内力分布计算及与试验对比研究[J].玻璃钢/复合材料, 2019(9):44-51. WU C L, WAN C H, GUO Y C.Internal force distribution calculation and experiment for bonded-bolted hybrid joints of composite structure[J].Fiber Reinforced Plastics/Composites, 2019(9):44-51(in Chinese).
[15] 邹田春, 李龙辉, 刘志浩, 等.搭接长度对CFRP-Al双搭接接头应变分布和失效模式的影响[J].航空学报, 2021, 42(6):224921. ZOU T C, LI L H, LIU Z H, et al.Effect of overlap length on strain distribution and failure law of CFRP-Al double lap joint[J].Acta Aeronautica et Astronautica Sinica, 2021, 42(6):224921(in Chinese).
[16] SUN L G, LI C, TIE Y, et al.Experimental and numerical investigations of adhesively bonded CFRP single-lap joints subjected to tensile loads[J].International Journal of Adhesion and Adhesives, 2019, 95:102402.
[17] TONG L Y.Bearing failure of composite bolted joints with non-uniform bolt-to-washer clearance[J].Composites Part A:Applied Science and Manufacturing, 2000, 31(6):609-615.
[18] 刘雷, 王敏, 孔谅, 等.钢和碳纤维增强材料胶接研究现状[J].材料导报, 2018, 32(S2):329-332. LIU L, WANG M, KONG L, et al.Research status of adhesive joints of steel with carbon fiber reinforced plastic[J].Materials Review, 2018, 32(S2):329-332(in Chinese).
[19] 刘志明, 许昶.碳纤维增强环氧树脂复合材料与铝板胶螺混合连接接头失效仿真[J].复合材料学报, 2019, 36(10):2308-2315. LIU Z M, XU C.Failure simulation of carbon fiber reinforced epoxy resin composite-aluminum bonded-bolted hybrid joint[J].Acta Materiae Compositae Sinica, 2019, 36(10):2308-2315(in Chinese).
[20] 杨本宁.复合材料胶-螺混合连接强度分析与损伤研究[D].郑州:郑州大学, 2019:14-15. YANG B N.Strength analysis and progressive damage research for the bonded-bolted hybrid composite joints[D].Zhengzhou:Zhengzhou University, 2019:14-15(in Chinese).
[21] 马晓龙, 李成, 铁瑛, 等.搭接长度对平纹机织复合材料胶接结构连接性能影响的多尺度分析[J].机械工程学报, 2020, 56(22):101-111. MA X L, LI C, TIE Y, et al.Multiscale analysis on the effect of lap length on bonding strength of adhesively bonding structures of plain weave composites[J].Journal of Mechanical Engineering, 2020, 56(22):101-111(in Chinese).

E-mail：hkxb@buaa.edu.cn

关于我们

期刊社服务

专业学科

封面文章

友情链接

主管单位：中国科学技术协会主办单位：中国航空学会北京航空航天大学

复合材料卫星承力筒连接结构分析

Analytical research on connecting structure of composite material satellite bearing cylinder

RichHTML

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价

[1]	张伟, 王彬文, 樊俊铃, 詹绍正, 焦婷, 杨宇. 基于多模式超声成像的CFRP冲击损伤无损表征与冲击后压缩强度预测[J]. 航空学报, 2023, 44(1): 426635-426635.
[2]	郑锋, 黄薇, 季宏丽, 裘进浩. 复合材料薄板结构中的声学黑洞效应探究[J]. 航空学报, 2023, 44(1): 426453-426453.
[3]	冉庆波, 肖鸿, 杨富鸿, 段玉岗. 含孔曲面自动铺丝轨迹规划算法[J]. 航空学报, 2022, 43(9): 425602-425602.
[4]	余煜玺, 张伟彬, 孙轶, 丛明辉, 朱建, 宋经远. 动密封用Ni基合金斜圈弹簧的变形行为及回弹力模拟[J]. 航空学报, 2022, 43(7): 425527-425527.
[5]	万傲霜. 复合材料直升机平尾结构概率损伤容限评估[J]. 航空学报, 2022, 43(6): 525557-525557.
[6]	王育鹏, 吕帅帅, 杨宇, 李嘉欣, 王叶子. 基于域自适应的复合材料结构损伤识别方法[J]. 航空学报, 2022, 43(6): 526752-526752.
[7]	赵天, 李营, 张超, 姚辽军, 黄怿行, 黄治新, 陈诚, 汪万栋, 祖磊, 周华民, 裘进浩, 邱志平, 方岱宁. 高性能航空复合材料结构的关键力学问题研究进展[J]. 航空学报, 2022, 43(6): 526851-526851.
[8]	郭琼, 刘玮, 裴连杰, 郭俊豪. 全尺寸复合材料机身筒段静力/疲劳试验技术[J]. 航空学报, 2022, 43(6): 525816-525816.
[9]	汪厚冰, 王夏涵, 林国伟, 李新祥, 杨胜春. 含离散源损伤的复合材料壁板的剩余强度评估[J]. 航空学报, 2022, 43(6): 525899-525899.
[10]	刘振东, 郑锡涛, 范雯静, 张东健. 固化残余应力对无人机复合材料机翼强度的影响[J]. 航空学报, 2022, 43(6): 526117-526117.
[11]	邓云飞, 周楠, 田锐, 魏刚. S型碳纤维褶皱夹芯结构低速冲击响应特性实验研究[J]. 航空学报, 2022, 43(6): 525446-525446.
[12]	刘增飞, 刘凯, 张斌斌, 李雪枫, 葛敬冉, 黄建, 李超, 孙新杨, 孙煜, 梁军. 纱线规格对3D机织复合材料拉伸性能的影响[J]. 航空学报, 2022, 43(6): 525453-525453.
[13]	曹勇, 张超. 薄层复合材料冲击损伤行为研究进展[J]. 航空学报, 2022, 43(6): 525323-525323.
[14]	李涤尘, 鲁中良, 田小永, 张航, 杨春成, 曹毅, 苗恺. 增材制造——面向航空航天制造的变革性技术[J]. 航空学报, 2022, 43(4): 525387-525387.
[15]	赵可汗, 刘多, 朱海涛, 陈斌, 胡胜鹏, 宋晓国. 钎焊温度对C/C/AgCuTi+C_f/TC4接头组织及力学性能的影响[J]. 航空学报, 2022, 43(4): 525007-525007.