1 |
刘大响. 一代新材料, 一代新型发动机: 航空发动机的发展趋势及其对材料的需求[J]. 材料工程, 2017, 45(10): 1-5.
|
|
LIU D X. One generation of new material, one generation of new type engine: Development trend of aero-engine and its requirements for materials[J]. Journal of Materials Engineering, 2017, 45(10): 1-5 (in Chinese).
|
2 |
TU Z C, MAO J K, HAN X S, et al. Prediction model for the anisotropic thermal conductivity of a 2.5-D braided ceramic matrix composite with thin-wall structure[J]. Applied Sciences, 2019, 9(5): 875.
|
3 |
杜昆, 陈麒好, 孟宪龙, 等. 陶瓷基复合材料在航空发动机热端部件应用及热分析研究进展[J]. 推进技术, 2022, 43(2): 113-131.
|
|
DU K, CHEN Q H, MENG X L, et al. Advancement in application and thermal analysis of ceramic matrix composites in aeroengine hot components[J]. Journal of Propulsion Technology, 2022, 43(2): 113-131 (in Chinese).
|
4 |
GAVALDA DIAZ O, AXINTE D A, BUTLER-SMITH P, et al. On understanding the microstructure of SiC/SiC Ceramic Matrix Composites (CMCs) after a material removal process[J]. Materials Science and Engineering: A, 2019, 743: 1-11.
|
5 |
TU Z C, MAO J K, HAN X S. Numerical study of film cooling over a flat plate with anisotropic thermal conductivity[J]. Applied Thermal Engineering, 2017, 111: 968-980.
|
6 |
ZHONG F Q, BROWN G L. Experimental study of multi-hole cooling for integrally-woven, ceramic matrix composite walls for gas turbine applications[J]. International Journal of Heat and Mass Transfer, 2009, 52(3-4): 971-985.
|
7 |
YU H J, ZHOU X G, ZHANG W, et al. Mechanical properties of 3D KD-I SiCf/SiC composites with engineered fibre-matrix interfaces[J]. Composites Science and Technology, 2011, 71: 699-704.
|
8 |
MEYER P, WAAS A M. Experimental results on the elevated temperature tensile response of SiC/SiC ceramic matrix notched composites[J]. Composites Part B: Engineering, 2018, 143: 269-281.
|
9 |
ABISSET E, DAGHIA F, LADEVÈZE P. On the validation of a damage mesomodel for laminated composites by means of open-hole tensile tests on quasi-isotropic laminates[J]. Composites Part A: Applied Science and Manufacturing, 2011, 42(10): 1515-1524.
|
10 |
ZHOU S, SUN Y, CHEN B Y, et al. Progressive damage simulation of open-hole composite laminates under compression based on different failure criteria[J]. Journal of Composite Materials, 2017, 51(9): 1239-1251.
|
11 |
XIAO M L, ZHANG Y B, WANG Z H, et al. Tensile failure analysis and residual strength prediction of CFRP laminates with open hole[J]. Composites Part B: Engineering 2017, 126: 49-59.
|
12 |
WAN L, ISMAIL Y, SHENG Y, et al. Progressive failure analysis of CFRP composite laminates under uniaxial tension using a discrete element method[J]. Journal of Composite Materials, 2021, 55(8): 1091-1108.
|
13 |
冉庆波, 肖鸿, 杨富鸿, 等. 含孔曲面自动铺丝轨迹规划算法[J]. 航空学报, 2022, 43(9): 425602.
|
|
RAN Q B, XIAO H, YANG F H, et al. Trajectory planning algorithm for automatic wire laying on perforated surface[J]. Acta Aeronautica et Astronautica Sinica, 2022, 43(9): 425602 (in Chinese).
|
14 |
GAO X G, YU G Q, XUE J G, et al. Failure analysis of C/SiC composites plate with a hole by the PFA and DIC method[J]. Ceramics International, 2017, 43(6): 5255-5266.
|
15 |
MEI H, ZHANG D, XIA J C, et al. The effect of hole defects on the oxidation behaviour of two-dimensional C/SiC composites[J]. Ceramics International, 2016, 42(14): 15479-15484.
|
16 |
ZHANG X H, GAO H S, WEN Z X, et al. Tension-tension fatigue behaviour of 3D braided SiCf/SiC composite with film cooling holes at 1 350 ℃ in air[J]. Ceramics International, 2020, 46(6): 7703-7710.
|
17 |
LIU Y S, HU C H, FENG W, et al. Microstructure and properties of diamond/SiC composites prepared by tape-casting and chemical vapor infiltration process[J]. Journal of the European Ceramic Society, 2014, 34(15): 3489-3498.
|
18 |
VIGNOLES G L. Modeling of chemical vapor infiltration processes[M]∥ Advances in Composites Manufacturing and Process Design. Amsterdam: Elsevier, 2015: 415-458.
|
19 |
ZHANG J X, LIU Y S, CHENG L F, et al. Effect of a diffusion-enhancing hole on the densification of a thick-section 2D C/SiC composite[J]. Journal of the European Ceramic Society, 2019, 39(15): 4609-4616.
|
20 |
王晶. LA-CVI法制备C/SiC陶瓷基复合材料的微结构设计与性能调控[D]. 西安: 西北工业大学, 2018: 91-93.
|
|
WANG J. Microstructure design and performance control of C/SiC composites fabricated by LA-CVI process[D]. Xi’an: Northwestern Polytechnical University, 2018: 91-93 (in Chinese).
|
21 |
惠新育, 许英杰, 张卫红, 等. 平纹编织SiC/SiC复合材料多尺度建模及强度预测[J]. 复合材料学报, 2019, 36(10): 2380-2388.
|
|
HUI X Y, XU Y J, ZHANG W H, et al. Multi-scale modeling and strength prediction of plain woven SiC/SiC composites[J]. Acta Materiae Compositae Sinica, 2019, 36(10): 2380-2388 (in Chinese).
|
22 |
王奇志, 林慧星, 许赟泉. 二维编织陶瓷基复合材料偏轴拉伸力学性能预测[J]. 复合材料学报, 2018, 35(12): 3423-3432.
|
|
WANG Q Z, LIN H X, XU Y Q. Mechanical properties prediction of 2D braided ceramic matrix composites under off-axial tension[J]. Acta Materiae Compositae Sinica, 2018, 35(12): 3423-3432 (in Chinese).
|
23 |
张锦, 张乃恭. 新型复合材料力学机理及其应用[M]. 北京: 北京航空航天大学出版社, 1993: 231.
|
|
ZHANG J, ZHANG N G. Mechanical mechanism and application of new composite materials[M]. Beijing: Beihang University Press, 1993: 231 (in Chinese).
|
24 |
WANG J, CHENG L F, LIU Y S, et al. Enhanced densification and mechanical properties of carbon fiber reinforced silicon carbide matrix composites via laser machining aided chemical vapor infiltration[J]. Ceramics International, 2017, 43(14): 11538-11541.
|
25 |
LEMAITRE J, DESMORAT R. Engineering damage mechanics: Ductile, creep, fatigue and brittle failures[M]. Berlin: Springer, 2005.
|
26 |
HASHIN Z. Failure criteria for unidirectional fiber composites[J]. Journal of Applied Mechanics, 1980, 47(2): 329-334.
|
27 |
HA S K, JIN K K, HUANG Y C. Micro-mechanics of failure (MMF) for continuous fiber reinforced composites[J]. Journal of Composite Materials, 2008, 42(18): 1873-1895.
|
28 |
KADDOUR A, HINTON M. Input data for test cases used in benchmarking triaxial failure theories of composites[J]. Journal of Composite Materials, 2012, 46(19-20): 2295-2312.
|
29 |
HUANG Y C, XU L, HA S K. Prediction of three-dimensional composite laminate response using micromechanics of failure[J]. Journal of Composite Materials, 2012, 46(19-20): 2431-2442.
|
30 |
RAGHAVA R, CADDELL R M, YEH G S Y. The macroscopic yield behaviour of polymers[J]. Journal of Materials Science, 1973, 8(2): 225-232.
|
31 |
HOLLISTER S J, KIKUCHI N. A comparison of homogenization and standard mechanics analyses for periodic porous composites[J]. Computational Mechanics, 1992, 10(2): 73-95.
|