| [1] Tsao C C, Hocheng H. Computerized tomography and C-scan for measuring delamination in the drilling of composite materials using various drills[J]. International Journal of Machine Tools & Manufacture, 2005, 45(11): 1282-1287.[2] Tsao C C, Hocheng H, Chen Y C. Delamination reduction in drilling composite materials by active backup force [J]. CIRP Annals-Manufacturing Technology, 2012, 61(1): 91-94.[3] Grilo T J, Paulo R M F, Silva C R M, et al. Experimental delamination analyses of CFRPs using different drill geometries[J]. Composites, 2013, 45(1): 1344-1350.[4] Khashaba U A. Delamination in drilling GFR-thermoset composites[J]. Composite Structures, 2004, 63(3): 313-327.[5] Davim J P, Rubio J C, Abrao A M. A novel approach based on digital image analysis to evaluate the delamination factor after drilling composite laminates[J]. Composite Science and Technology, 2007, 67(9): 1939-1945.[6] Robert E, Green J. Non-contact ultrasonic techniques[J]. Ultrasonics, 2004, 42(1): 9-16.[7] He C F. Laser ultrasonic techniques and applications. Beijing: Department of Engineering Mechanics, Tsinghua University, 1995. (in Chinese) 何存富. 激光超声技术及其应用研究. 北京: 清华大学工程力学系, 1995.[8] Geng R S, Zheng Y. Prospective view on the application of nondestructive testing in air industry and possible challenges[J]. Nondestructive Testing, 2002, 24(1): 1-5. (in Chinese) 耿荣生, 郑勇. 航空无损检测技术发展动态及面临的挑战[J]. 无损检测, 2002, 24(1): 1-5.[9] Wright W M D, Hutchins D A, Gachagan A, et al. Polymer composite material characterization using a laser/air-transducer system[J]. Ultrasonics, 1996, 34(8): 825-833.[10] Audoin B. Non-destructive evaluation of composite materials with ultrasonic waves generated and detected by lasers[J]. Ultrasonics, 2002, 40(1): 735-740.[11] Liu S P, Guo E M, Liu F F, et al. Evaluation of defects in carbon fiber reinforced composites by laser ultrasonic technique[J]. Nondestructive Testing, 2007, 29(7): 396-398. (in Chinese) 刘松平, 郭恩明, 刘菲菲, 等. 激光超声检测碳纤维增强树脂基复合材料的缺陷评估技术研究[J]. 无损检测, 2007, 29(7): 396-398.[12] Pan Y D, Qian M L, Xu W J, et al. Residual stress profiling of an aluminum alloy by laser ultrasonics[J]. Acta Acustica, 2004, 29(3): 254-257. (in Chinese) 潘永东, 钱梦騄, 徐卫疆, 等. 激光超声检测铝合金材料的残余应力分布[J]. 声学学报, 2004, 29(3): 254-257.[13] Dubois M, Drake T E. Evolution of industrial laser-ultrasonic systems for the inspection of composites[J]. Nondestructive Testing and Evaluation, 2011, 26(3): 213-228.[14] Dubois M, Drake T E, Osterkamp M. Low-cost ultrasonic inspection of composites for aerospace applications with LaserUT technology[J]. Journal of the Japanese Society for Non-Destructive Inspection, 2008, 57(1): 11-20.[15] Zhou Z G, Sun G K, Li Z, et al. Application of laser ultrasonic testing technique on the detection of composite structures[J]. Journal of Harbin University of Science and Technology, 2012, 17(6): 119-122. (in Chinese) 周正干, 孙广开, 李征, 等. 激光超声检测技术在复合材料检测中的应用[J]. 哈尔滨理工大学学报, 2012, 17(6): 119-122.[16] Dubois M, Lorraine P W, Filkins R J, et al. Experimental verification of the effects of optical wavelength on the amplitude of laser generated ultrasound in polymer-matrix composites[J]. Ultrasonics, 2002, 40(1): 809-812.[17] Pavel A, Alexey K, Sridhar K, et al. Imaging of damage in sandwich composite structures[J]. Composites, 2004, 35(6): 557-562.[18] Xu N, Zhou Z G, Liu W P, et al. Ultrasonic phased array inspection method for the corner of L-shaped components[J]. Acta Aeronautica et Astronautica Sinica, 2013, 34(2): 419-425. (in Chinese) 徐娜, 周正干, 刘卫平, 等. L型构件R区的超声相控阵检测方法[J]. 航空学报, 2013, 34(2): 419-425. |
CJA
