航空学报 > 2013, Vol. 34 Issue (9): 2141-2149   doi: 10.7527/S1000-6893.2013.0342

基于DCRSM的HPT叶尖径向运行间隙可靠性分析

费成巍, 白广忱   

  1. 北京航空航天大学 能源与动力工程学院, 北京 100191
  • 收稿日期:2012-10-08 修回日期:2012-12-25 出版日期:2013-09-25 发布日期:2012-12-27
  • 通讯作者: 白广忱,Tel.:010-82317418 E-mail:dlxbgc@buaa.edu.cn E-mail:dlxbgc@buaa.edu.cn
  • 作者简介:费成巍 男, 博士研究生。主要研究方向: 航空发动机结构可靠性分析与优化设计、故障诊断技术。Tel: 010-82317418 E-mail: feicw544@163.com;白广忱 男, 博士, 教授, 博士生导师。主要研究方向: 机械可靠性工程, 可靠性设计、优化设计。Tel: 010-82317418 E-mail: dlxbgc@buaa.edu.cn
  • 基金资助:

    国家自然科学基金(51175017);北京航空航天大学博士生创新基金;高等学校博士学科点专项科研基金

Reliability Analysis for HPT Blade-tip Radial Running Clearance Based on DCRSM

FEI Chengwei, BAI Guangchen   

  1. School of Energy and Power Engineering, Beihang University, Beijing 100191, China
  • Received:2012-10-08 Revised:2012-12-25 Online:2013-09-25 Published:2012-12-27
  • Supported by:

    National Natural Science Foundation of China (51175017);Innovation Foundation of BUAA for Ph.D.Graduates;Specialized Research Fund for the Doctoral Program of Higher Education

摘要:

为了有效地进行航空发动机高压涡轮(HPT)叶尖径向运行间隙(BTRRC)设计,从概率的角度进行BTRRC的可靠性分析。根据BTRRC的结构特点,提出了高精度、高效率可靠性分析的分布式协同响应面法(DCRSM),以二次响应面函数为基础建立了DCRSM数学模型,并将DCRSM应用到航空发动机HPT BTRRC的可靠性分析中加以验证。结果显示:当稳态叶尖间隙δ=1.86 mm时,BTRRC的可靠度为0.996 8,综合考虑发动机效率和可靠性,基本上满足BTRRC的设计和工程需要。通过方法比较显示了DCRSM在BTRRC可靠性分析中,不但能解决难以分析的问题,还能在保证计算精度的前提下提高计算速度和计算效率;充分验证了DCRSM在BTRRC可靠性分析中的有效性和可行性,为复杂机械可靠性分析和优化提供了有效依据。

关键词: 航空发动机, 高压涡轮, 叶尖径向运行间隙, 多对象多学科, 可靠性, 分布式协同响应面法

Abstract:

In order to design more effectively aeroengine high pressure turbine (HPT) blade-tip radial running clearance (BTRRC), a BTRRC reliability analysis is accomplished from a probabilistic perspective in this paper. Distributed collaborative response surface method (DCRSM) with high accuracy and high efficiency is proposed for reliability analysis according to the structural features of BTRRC. The mathematical model of DCRSM is established based on the quadratic response surface function. The DCRSM is applied to the reliability analysis of an aeroengine HPT BTRRC to verify the advantages. The reliability analysis results show that the reliability of BTRRC is 0.996 8 when the static blade-tip clearance δ=1.86 mm, which is appropriate in the BTRRC and aeroengine design for satisfying engineering requirements while considering synthetically the efficiency and reliability of an aeroengine. As demonstrated in the comparison of methods, the DCRSM can not only make a difficult problem easy to resolve, but also improve greatly computation speed, save computing time and ameliorate computational efficiency while keeping calculation accuracy. Therefore, DCRSM is fully verified to be feasible and effective in BTRRC reliability analysis. Meanwhile, the present study provides some useful insight into designing and optimizing more effectively complex machinery reliability schemes in general.

Key words: aeroengine, high pressure turbine, blade-tip radial running clearance, multi-object multi-disciplinary, reliability, distributed collaborative response surface method

中图分类号: