磨粒建模方法与切削过程仿真研究

材料工程与机械制造

本期目录 | 过刊浏览 | 高级检索

前一篇 | 后一篇

磨粒建模方法与切削过程仿真研究

宿崇^1,2, 许立¹, 李明高², 马纪军²

1. 大连交通大学机械工程学院, 辽宁大连 116028;
2. 唐山轨道客车有限责任公司, 河北唐山 063000

收稿日期:2011-11-18 修回日期:2011-11-21 出版日期:2012-11-25 发布日期:2012-11-22
通讯作者: 宿崇 E-mail:sc@djtu.edu.cn
基金资助:
国家自然科学基金(50975043)

Study on Modeling and Cutting Simulation of Abrasive Grains

SU Chong^1,2, XU Li¹, LI Minggao², MA Jijun²

1. School of Mechanical Engineering, Dalian Jiaotong University, Dalian 116028, China;
2. Tangshan Railway Vehicle Co., Ltd., Tangshan 063000, China

Received:2011-11-18 Revised:2011-11-21 Online:2012-11-25 Published:2012-11-22
Supported by:
National Natural Science Foundation of China (50975043)

摘要/Abstract

摘要： 针对砂轮表面上磨粒形状不规则、尺寸不确定的几何特征,研究了模拟实际磨粒的几何建模方法。采用随机空间平面切分正六面体的方法构建了具有实际磨粒几何特征的不规则多面体结构磨粒。基于LS-DYNA软件,采用流固耦合有限元法模拟了不规则多面体结构磨粒的切削过程。分析切削过程中工件材料的应力分布规律与切削变形规律,得出结论:工件材料的加工应力主要集中在与磨粒切削刃及棱角接触的区域;切屑沿磨粒挤压前面向上流动,并于挤压面法向方向上流出;磨粒挤压前角的增大有利于切屑的形成。利用陶瓷立方氮化硼(CBN)砂块进行了磨粒划擦试验,试验结果证实了磨粒切削仿真结果的准确性。

关键词: 磨削, 磨粒, 建模, 切削仿真, 流固耦合

Abstract: A modeling method of abrasive grains is studied in this paper taking into consideration their irregular geometry and inconsistent size. Abrasive grains in the shape of irregular polyhedrons are modeled by cutting regular hexahedrons with random space planes.Their geometric features are similar to those observed in natural abrasive grains. Based on the LS-DYNA software, the cutting process of irregular polyhedral abrasive grains is simulated by the fluid-solid interaction method. According to the stress distribution and deformation law of workpiece materials, it can be seen that the machining stresses of a workpiece material mainly concentrate on the areas which are in contact with the cutting edges and cutting points of the abrasive grains. Chips flow upward along the extrusion face of the abrasive grains, and finally flow out in the normal direction. An increase of the rake angle of abrasive grains is helpful to chip formation. Scratching processes of abrasive grains are experimented by vitrified bonded CBN blocks. The validity of the simulation is verified by experiment results.

Key words: grinding, abrasive grain, modeling, cutting simulation, fluid-solid interaction

中图分类号:

宿崇, 许立, 李明高, 马纪军. 磨粒建模方法与切削过程仿真研究[J]. 航空学报, 2012, 33(11): 2130-2135.

SU Chong, XU Li, LI Minggao, MA Jijun. Study on Modeling and Cutting Simulation of Abrasive Grains[J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2012, 33(11): 2130-2135.

参考文献

[1] Ohbuchi Y, Matsuo T. Force and chip formation in single-grit orthogonal cutting with shaped CBN and diamond grains. CIRP Annals-Manufacturing Technology, 1991, 40(1): 327-330.
[2] Matsuo T, Toyoura S, Oshima E, et al. Effect of grain shape on cutting force in superabrasive single-grit tests. CIRP Annals-Manufacturing Technology, 1989, 38(1): 323-326.
[3] Feng B F. Investigation of effects of grinding speed on some grinding outputs. Shenyang: School of Mechanical Engineering and Automation, Northeastern University, 2003. (in Chinese) 冯宝富. 磨削速度对磨削机理诸方面影响的研究. 沈阳:东北大学机械工程学院, 2003.
[4] Huo F W. Study on the mechanism of ductile mode grinding of silicon wafers. Dalian: School of Mechanical Engineering, Dalian University of Technology, 2006. (in Chinese) 霍凤伟. 硅片延性域磨削机理研究. 大连:大连理工大学机械工程学院,2006.
[5] Fang L, Cen Q, Sun K, et al. FEM computation of groove ridge and Monte Carlo simulation in two-body abrasive. Wear, 2005, 258 (1-4): 265-274.
[6] Guo X G, Guo D M, Kang R K, et al. Study of abrasive wear in monocrystal silicon grinding with molecular dynamic simulation. Journal of Semiconductors, 2008, 29(6): 1180-1183. (in Chinese) 郭晓光,郭东明,康仁科,等. 单晶硅纳米级磨削过程中磨粒磨损的分子动力学仿真. 半导体学报,2008, 29(6): 1180-1183.
[7] Gong Y D, Wang B, Wang W S. The simulation of grinding wheels and ground surface roughness based on virtual reality technology. Journal of Materials Processing Technology, 2002, 129(1-3):123-126.
[8] Wang J M, Ye R Z, Tang Y P, et al. 3D dynamic finite element simulation analysis of single abrasive grain during surface grinding. Diamond & Abrasives Engineering, 2009, 173(5):41-45. (in Chinese) 王君明,叶人珍,汤漾平,等. 单颗磨粒的平面磨削三维动态有限元仿真. 金刚石与磨料磨具工程, 2009,173(5): 41-45.
[9] Klocke F. Modeling and simulation in grinding. Proceedings of the 1st European Conference on Grinding, 2003: 6-7.
[10] Wang W S, Su C, Pang Z R, et al. Finite element simulation of chip formation with single grain. Key Engineering Materials, 2009, 416: 210-215.
[11] Komanduri R, Chandrasekaran N, Raff L M. Effect of tool geometry in nanometric cutting: a molecular dynamics simulation approach. Wear, 1998, 219(1): 84-97.
[12] Komanduri R, Chandrasekaran N, Raff L M. MD simulation of indentation and scratching of single crystal aluminum. Wear, 2000, 240(1-2): 113-143.
[13] Li B M, Zhao B. Modern grinding technology. Beijing: China Machine Press, 2003: 12-18.(in Chinese) 李伯民,赵波. 现代磨削技术. 北京:机械工业出版社,2003: 12-18.
[14] Ren J X, Hua D A. Grinding theory. Xi’an: Northwestern Polytechnical University Press, 1988: 1-6.(in Chinese) 任敬心,华定安. 磨削原理. 西安:西北工业大学出版社,1988: 1-6.
[15] Hallquist J O. LS-DYNA theoretical manual. California: Livermore Software Technology Corporation, 1998: 16.36-16.38.

E-mail：hkxb@buaa.edu.cn

关于我们

期刊社服务

专业学科

封面文章

友情链接

主管单位：中国科学技术协会主办单位：中国航空学会北京航空航天大学

磨粒建模方法与切削过程仿真研究

Study on Modeling and Cutting Simulation of Abrasive Grains

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价

[1]	刘闯, 鱼小军, 张婷, 朱豪坤. 无人集群装备仿真试验关键技术现状及趋势[J]. 航空学报, 2022, 43(S1): 726919-726919.
[2]	吴惠松, 林麒, 柳汀, 刘震, 师璐, 王晓光. 风洞虚拟飞行试验模型绳系并联支撑机构[J]. 航空学报, 2022, 43(8): 125758-125758.
[3]	罗佳杰, 宋文滨. 层流机翼及其增升装置嵌套协同优化方法[J]. 航空学报, 2022, 43(8): 125377-125377.
[4]	余煜玺, 张伟彬, 孙轶, 丛明辉, 朱建, 宋经远. 动密封用Ni基合金斜圈弹簧的变形行为及回弹力模拟[J]. 航空学报, 2022, 43(7): 425527-425527.
[5]	汪博, 高培鑫, 马辉, 孙伟, 林君哲, 李晖, 韩清凯, 刘中华. 航空发动机管路系统动力学特性综述[J]. 航空学报, 2022, 43(5): 25332-025332.
[6]	孙沁, 李鸿旭, 王毓智, 周丽萍, 张英朝. 韧性无人机群多域协同方法建模与求解[J]. 航空学报, 2022, 43(5): 325340-325340.
[7]	王博臣, 侯玉亮, 夏凉, 史铁林. 基于子结构法与损伤识别的周期性结构脆性断裂相场模拟[J]. 航空学报, 2022, 43(3): 225159-225159.
[8]	曹先彬, 杨朋. 临空信息网络信道建模与动态部署技术展望[J]. 航空学报, 2022, 43(10): 527332-527332.
[9]	施闯, 肖云, 范磊, 郑福, 王成, 黄志勇, 李桢. 导航卫星辐射光压建模进展及发展趋势[J]. 航空学报, 2022, 43(10): 527389-527389.
[10]	冉茂鹏, 王成才, 刘华华, 王薇, 吕金虎. 变体飞行器控制技术发展现状与展望[J]. 航空学报, 2022, 43(10): 527449-527449.
[11]	丁希仑, 金雪莹. 旋翼无人机交互作业动力学建模研究进展[J]. 航空学报, 2022, 43(10): 527388-527388.
[12]	崔朋, 宋杰, 李清廉, 陈兰伟, 梁涛, 孙郡. 电动泵压式液氧煤油变推力火箭发动机动力学建模与仿真分析: Part I-单点工况分析[J]. 航空学报, 2022, 43(1): 124884-124884.
[13]	敬彤, 臧朝平, 张涛, Yevgen Pavlovich PETROV. 复杂时变激励下失谐叶盘瞬态强迫响应分析[J]. 航空学报, 2021, 42(9): 224529-224529.
[14]	年鹏, 宋笔锋, 宣建林, 王思琦. 扑翼飞行器动力系统建模方法[J]. 航空学报, 2021, 42(9): 224646-224646.
[15]	陈旭亮, 张琛, 季宏丽, 裘进浩. SMA鼓包迟滞建模与控制策略[J]. 航空学报, 2021, 42(9): 224652-224652.