航空学报 > 1989, Vol. 10 Issue (4): 180-183

NPU翼型的气动力分析和改进设计

华俊1, 张仲寅1, G.Redeker2, G.Wichmann2   

  1. 1. 西北工业大学;2. 西德宇航院
  • 收稿日期:1987-12-30 修回日期:1900-01-01 出版日期:1989-04-25 发布日期:1989-04-25

AERODYNAMIC ANALYSIS AND MODIFICATION DESIGN OF NPU AIRFOILS

Hua Jun1, Zhang Zhongyin1, G.Redeker2, G.Wichmann2   

  1. 1. Northwestern Polytechnical University;2. German Aerospace Research Establishment
  • Received:1987-12-30 Revised:1900-01-01 Online:1989-04-25 Published:1989-04-25

摘要:

在飞行器设计中用计算方法设计超临面翼型已完全取代了选用现成翼型的设计方法。为考察已设计出的NPU翼型是否满足飞行器设计要求我们对其进行了全面气动分析,发现这些翼型尚有不足之处,有必要进行改进设计。

关键词: 翼型, 最佳化空气动力特性

Abstract:

This paper presents a numerical study of series of NPU transonic airfoils.The reliability of the numerical analysis" is verified by the experimental results of two of such airfoils.The investigation shows that the design points of these airfoils are all within the boundary of drag divergence with certain marginsdue to the advantage of small wave drag of the airfoils.But the pressure distributions show some waviness on the suction peaks,and there are shock waves in the front part of some airfoils,as well as a strong pressure gradient near the trailing edge. These lead to early transitions and-early separation of the boundary layer flows.A modified design has been carried out mainly by specifying new curvature distributions of the airfoil contours and solving the curvature equations.The detailed computations on boundary layer flows also indicate a good improvement. The new airfoil has a long extension of laminar flow, and the turbulent separation has been shifted to the trailing edge. The efficiency of the curvature modification method is thus demonstrated.

Key words: airfoils, optimization, aerodynamic characteristics