二维三轴编织复合材料压缩失效行为的细观有限元模拟

doi:10.7527/S1000-6893.2019.22865

固体力学与飞行器总体设计

本期目录 | 过刊浏览 | 高级检索

前一篇 | 后一篇

二维三轴编织复合材料压缩失效行为的细观有限元模拟

刘鹏^1,2, 郭亚洲^1,2, 赵振强^1,2, 邢军^1,3, 张超^1,2

1. 西北工业大学航空学院, 西安 710072;
2. 西北工业大学陕西省冲击动力学及工程应用重点实验室, 西安 710072;
3. 中国民用航空适航审定中心, 北京 100102

收稿日期:2018-12-21 修回日期:2019-01-15 出版日期:2019-07-15 发布日期:2019-04-01
通讯作者: 张超 E-mail:chaozhang@nwpu.edu.cn
基金资助:
国家自然科学基金（11772267）

Meso-scale finite element simulation of compressive failure behavior of two-dimensional triaxially braided composite

LIU Peng^1,2, GUO Yazhou^1,2, ZHAO Zhenqiang^1,2, XING Jun^1,3, ZHANG Chao^1,2

1. School of Aeronautics, Northwestern Polytechnical University, Xi'an 710072, China;
2. Shaanxi Key Laboratory of Impact Dynamics and Its Engineering Applications, Northwestern Polytechnical University, Xi'an 710072, China;
3. Airworthiness Certification Center, Civil Aviation Administration of China, Beijing 100102, China

Received:2018-12-21 Revised:2019-01-15 Online:2019-07-15 Published:2019-04-01
Supported by:
National Natural Science Foundation of China (11772267)

摘要/Abstract

摘要： 为研究典型二维三轴编织复合材料（2DTBC）的压缩破坏机理，建立了细观有限元模拟方法体系。提出了反映编织复合材料真实几何特性的单胞模型建模策略，根据Murakami-Ohno损伤理论建立了各向异性损伤模型来模拟纤维束中的损伤起始和扩展行为，通过引入波动系数描述了纤维束的起伏状态，并采用内聚力单元来模拟界面分层。在此基础上，分析得到了二维三轴编织复合材料在压缩载荷下的破坏过程，研究了压缩载荷下纤维束和界面层的损伤演化，探讨了纤维束波动对压缩性能的影响规律。通过与相关试验结果对比，该模型能够准确预测二维三轴编织复合材料在面内压缩载荷下的力学响应和主要失效行为，以及自由边效应。细观失效过程分析结果表明，二维三轴编织复合材料轴向压缩的破坏是由轴向纤维束的纤维压缩失效主导的；横向压缩破坏则是由偏轴纤维束的纤维压缩失效引起的。

关键词: 二维三轴编织复合材料, 有限元方法, 细观尺度, 纤维束波动, 压缩强度, 渐进损伤行为

Abstract: A meso-scale finite element model is developed to predict the progressive damage behavior of the two-Dimensional Triaxially Braided Composite (2DTBC) subjected to compressive loading conditions. A unit cell model that reflects the realistic geometrical properties of the braided composite is established. Based on Murakami-Ohno damage theory, an anisotropic damage model is established to simulate the damage initiation and the propagation process in fiber bundles. Undulation coefficient is introduced to describe the extent of undulation. The interfaces are simulated using the cohesive element model. The compressive damage process of 2DTBC is systematically illustrated and analyzed using the meso-scale finite element model, with special focus on the damage evolution process of fiber bundles and interfaces, and the effect of fiber bundle undulation on the effective compressive properties. The proposed model shows excellent correlation with the experimental results, not only capturing the global stress-strain responses, but also capturing the progressive damage behavior and the free-edge effect of the composite. The results indicate that the axial compression failure of the 2DTBC is dominated by the fiber-compression failure of axial fiber bundles, and the transverse compression failure is caused by the fiber-compression failure of bias fiber bundles.

Key words: two-dimensional triaxially braided composite, finite element method, meso-scale, fiber bundle undulation, compressive strength, progressive damage behavior

中图分类号:

V258⁺.3

刘鹏, 郭亚洲, 赵振强, 邢军, 张超. 二维三轴编织复合材料压缩失效行为的细观有限元模拟[J]. 航空学报, 2019, 40(7): 222865-222865.

LIU Peng, GUO Yazhou, ZHAO Zhenqiang, XING Jun, ZHANG Chao. Meso-scale finite element simulation of compressive failure behavior of two-dimensional triaxially braided composite[J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2019, 40(7): 222865-222865.

参考文献

[1] MARSH G. Aero engines lose weight thanks to composites[J]. Reinforced Plastics, 2012, 56(6):32-35.
[2] MCGREGOR C, VAZIRI R, XIAO X R. Finite element modelling of the progressive crushing of braided composite tubes under axial impact[J]. International Journal of Impact Engineering, 2010, 37(6):662-672.
[3] SHI D H, XIAO X R. A new shell-beam element modeling method and its use in crash simulation of triaxial braided composites[J]. Composite Structures, 2017, 160:792-803.
[4] LITTELL J. The experimental and analytical characterization of the macromechanical response for triaxial braided composite materials[D]. Akron, OH:The University of Akron, 2008:7-174.
[5] KOHLMAN L W. Evaluation of test methods for triaxial braid composites and the development of a large multiaxial test frame for validation using braided tube specimens[D]. Akron, OH:The University of Akron, 2012:18-123.
[6] WEHRKAMP-RICHTER T, DE CARVALHO N V, PINHO S T. A meso-scale simulation framework for predicting the mechanical response of triaxial braided composites[J]. Composites Part A:Applied Science and Manufacturing, 2018, 107:489-506.
[7] QUEK S C, WAAS A M, SHAHWAN K W, et al. Compressive response and failure of braided textile composites:Part 1-Experiments[J]. International Journal of Non-Linear Mechanics, 2004, 39(4):635-648.
[8] CHENG J. Material modeling of strain rate dependent polymer and 2D tri-axially braided composites[D]. Akron, OH:The University of Akron, 2006:45-62.
[9] LI X T, BINIENDA W K, LITTELL J D. Methodology for impact modeling of triaxial braided composites using shell elements[J]. Journal of Aerospace Engineering, 2009, 22(3):310-317.
[10] GOLDBERG R K, BLINZLER B J, BINIENDA W K. Investigation of a macromechanical approach to analyzing triaxially-braided polymer composites[J]. AIAA Journal, 2011, 49(1):205-215.
[11] GOLDBERG R K, BLINZLER B J, BINIENDA W K. Modification of a macromechanical finite element-based model for impact analysis of triaxially braided composites[J]. Journal of Aerospace Engineering, 2011, 25(3):383-394.
[12] QUEK S C, WAAS A, SHAHWAN K W, et al. Compressive response and failure of braided textile composites:Part 2-Computations[J]. International Journal of NonLinear Mechanics, 2004, 39(4):649-663.
[13] SONG S, WAAS A M, SHAHWAN K W, et al. Braided textile composites under compressive loads:Modeling the response, strength and degradation[J]. Composites Science and Technology, 2007, 67(15-16):3059-3070.
[14] SONG S, WAAS A M, SHAHWAN K W, et al. Compression response of 2D braided textile composites:Single cell and multiple cell micromechanics based strength predictions[J]. Journal of Composite Materials, 2008, 42(23):2461-2482.
[15] ZHANG C, LI N, WANG W Z, et al. Progressive damage simulation of triaxially braided composite using a 3D meso-scale finite element model[J]. Composite Structures, 2015, 125:104-116.
[16] ZHAO Z Q, DANG H Y, ZHANG C, et al. A multi-scale modeling framework for impact damage simulation of triaxially braided composites[J]. Composites Part A:Applied Science and Manufacturing, 2018, 110:113-125.
[17] LI X T, BINIENDA W K, GOLDBERG R K. Finite-element model for failure study of two-dimensional triaxially braided composite[J]. Journal of Aerospace Engineering, 2010, 24(2):170-180.
[18] ZHANG C, BINIENDA W K, GOLDBERG R K. Free-edge effect on the effective stiffness of single-layer triaxially braided composite[J]. Composites Science and Technology, 2015, 107:145-153.
[19] ZHAO Z Q, LIU P, CHEN C Y, et al. Modeling the transverse tensile and compressive failure behavior of triaxially braided composites[J]. Composites Science and Technology, 2019, 172:96-107.
[20] LOMOV S V, IVANOV D S, VERPOEST I, et al. Meso-FE modelling of textile composites:Road map, data flow and algorithms[J]. Composites Science and Technology, 2007, 67(9):1870-1891.
[21] LITTELL J D, RUGGERI C R, GOLDBERG R K, et al. Measurement of epoxy resin tension, compression, and shear stress-strain curves over a wide range of strain rates using small test specimens[J]. Journal of Aerospace Engineering, 2008, 21(3):162-173.
[22] HASHIN Z. Failure criteria for unidirectional fiber composites[J]. Journal of Applied Mechanics, 1980, 47(2):329-334.
[23] HOU J P, PETRINIC N, RUIZ C, et al. Prediction of impact damage in composite plates[J]. Composites Science and Technology, 2000, 60(2):273-281.
[24] BLACKKETTER D M, WALRATH D E, HANSEN A C. Modeling damage in a plain weave fabric-reinforced composite material[J]. Journal of Composites, Technology and Research, 1993, 15(2):136-142.
[25] CHAMIS C C. Simplified composite micromechanics equations for strength, fracture toughness, impact resistance and environmental effects[J]. Sampe Quarterly, 1984, 15:41-55.
[26] HUANG Z M. The mechanical properties of composites reinforced with woven and braided fabrics[J]. Composites Science and Technology, 2000, 60(4):479-498.
[27] 芦冠达, 黄争鸣. 应用桥联理论与有限元模型的航空复合材料结构失效分析[J]. 航空学报, 2018, 39(6):221646. LU G D, HUANG Z M. Failure analysis of aeronautic composite structures incorporated with bridging model and FE model[J]. Acta Aeronautica et Astronautica Sinica, 2018, 39(6):221646.
[28] 黄争鸣. 桥联理论研究的最新进展[J]. 应用数学和力学, 2015, 36(6):563-581. HUANG Z M. Latest advancements of the bridging model theory[J]. Applied Mathematics and Mechanics, 2015, 36(6):563-581.
[29] ZHANG C. Multi-scale characterization and failure modeling of carbon/epoxy triaxially braided composite[D]. Akron, OH:The University of Akron, 2013:101-139.
[30] Dassault Systèmes Simulia Corporation. ABAQUS analysis user's manual[M]. Providence, RI:Dassault Systèmes Simulia Corporation, 2014.
[31] CAO Y, FENG Y W, XUE X F, et al. Evaluation of interlaminar stresses in composite laminates with a bolt-filled hole using a linear elastic traction-separation description[J]. Applied Sciences, 2017, 7(1):1-15.
[32] SUN W, GUAN Z D, LI Z S, et al. Compressive failure analysis of unidirectional carbon/epoxy composite based on micro-mechanical models[J]. Chinese Journal of Aeronautics, 2017, 30(6):1907-1918.

E-mail：hkxb@buaa.edu.cn

关于我们

期刊社服务

专业学科

封面文章

友情链接

主管单位：中国科学技术协会主办单位：中国航空学会北京航空航天大学

二维三轴编织复合材料压缩失效行为的细观有限元模拟

Meso-scale finite element simulation of compressive failure behavior of two-dimensional triaxially braided composite

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价

[1]	麻震宇, 邓小龙, 杨希祥, 朱炳杰. 平流层飞艇驻空过程热结构耦合特性[J]. 航空学报, 2023, 44(19): 228337-228337.
[2]	路来骁, 徐长官, 刘建华, 秦美镇, 吕英波, 阎玉芹. 初始应力状态对薄壁件双侧滚压影响规律[J]. 航空学报, 2023, 44(10): 427415-427415.
[3]	张伟, 王彬文, 樊俊铃, 詹绍正, 焦婷, 杨宇. 基于多模式超声成像的CFRP冲击损伤无损表征与冲击后压缩强度预测[J]. 航空学报, 2023, 44(1): 426635-426635.
[4]	吴志渊, 闫寒, 吴林潮, 马辉, 瞿叶高, 张文明. 旋转裂纹叶片-弹性轮盘耦合系统振动特性[J]. 航空学报, 2022, 43(9): 625442-625442.
[5]	万傲霜, 王振名, 李顶河. 基于三阶剪切计算连续性方法的编织复合材料板三尺度分析模型[J]. 航空学报, 2022, 43(12): 226614-226614.
[6]	石文泽, 陈巍巍, 卢超, 程进杰, 陈尧. 高温铝合金电磁超声检测回波特性及因素分析[J]. 航空学报, 2020, 41(12): 423854-423854.
[7]	李湘郡, 李彦斌, 郭飞, 吴邵庆. C/C复合材料的压缩强度分布与可靠性评估[J]. 航空学报, 2019, 40(8): 222853-222853.
[8]	田硕, 尚建勤, 盖鹏涛, 陈福龙, 曾元松. 带筋整体壁板预应力喷丸成形数值模拟及变形预测[J]. 航空学报, 2019, 40(10): 422847-422847.
[9]	路来骁, 孙杰, 韩雄, 熊青春, 宋戈. 基于能量理论的航空整体结构件滚压变形校正载荷预测方法[J]. 航空学报, 2017, 38(12): 421326-421326.
[10]	梁珩, 曾建江, 易礼毅, 童明波. 高超声速飞行器多层次结构强度分析方法[J]. 航空学报, 2016, 37(2): 588-596.
[11]	沈裕峰, 李勇, 还大军, 王鑫. 低速冲击对K-cor夹层结构力学性能的影响[J]. 航空学报, 2016, 37(12): 3853-3863.
[12]	余雄庆, 欧阳星, 邢宇, 王宇. 机翼结构重量预测的多学科分析优化方法[J]. 航空学报, 2016, 37(1): 235-243.
[13]	陈晖, 谭昌柏, 王志国. 耦合几何与材料误差的柔性装配偏差统计分析[J]. 航空学报, 2015, 36(9): 3176-3186.
[14]	刘莉, 陈树霖, 周思达, 陈昭岳. 脉冲子结构与有限元刚-弹混合连接的子结构方法[J]. 航空学报, 2015, 36(8): 2670-2680.
[15]	白天, 朱春玲, 苗波, 李清英, 张泉. 平面铝板上的压电振动除冰方法[J]. 航空学报, 2015, 36(5): 1564-1573.