层合板干涉螺接分层损伤及其临界干涉量

doi:10.7527/S1000-6893.2015.0242

材料工程与机械制造

本期目录 | 过刊浏览 | 高级检索

前一篇 | 后一篇

层合板干涉螺接分层损伤及其临界干涉量

宋丹龙¹, 张开富¹, 钟衡², 李原¹

1. 西北工业大学现代设计与集成制造技术教育部重点实验室, 西安 710072;
2. 成都飞机工业(集团)有限责任公司, 成都 610092

收稿日期:2015-07-16 修回日期:2015-08-28 出版日期:2016-05-15 发布日期:2015-09-02
通讯作者: 张开富,Tel.:029-88460773 E-mail:zhangkf@nwpu.edu.cn E-mail:zhangkf@nwpu.edu.cn
作者简介:宋丹龙,男,博士研究生。主要研究方向:复合材料先进连接技术与装备。Tel:029-88460773 E-mail:songdanlong@qq.com;张开富,男,博士,教授,博士生导师。主要研究方向:先进装配与连接技术、复合材料加工技术。Tel:029-88460773 E-mail:zhangkf@nwpu.edu.cn
基金资助:
国家自然科学基金(51275410,51305349)

Delamination damage and critical interference percentage for interference fit bolt joint of laminates

SONG Danlong¹, ZHANG Kaifu¹, ZHONG Heng², LI Yuan¹

1. The Ministry of Education Key Laboratory of Contemporary Design and Integrated Manufacturing Technology, Northwestern Polytechnical University, Xi'an 710072, China;
2. Chengdu Aircraft Industrial(Group) Co. LTD., Chengdu 610092, China

Received:2015-07-16 Revised:2015-08-28 Online:2016-05-15 Published:2015-09-02
Supported by:
National Natural Science Foundation of China (51275410, 51305349)

摘要/Abstract

摘要：

复合材料层合板的干涉配合连接具有优越的性能,是飞机复合材料结构连接的发展趋势。然而,层合板在干涉连接过程中易出现分层损伤。针对以上问题,采用理论建模与有限元模拟方法研究了碳纤维增强树脂基复合材料(CFRP)层合板干涉螺接过程中的分层损伤及其临界干涉量。首先,对CFRP层合板的干涉螺接工艺过程和分层损伤进行力学行为分析;然后,基于虚功原理,建立了各层界面的分层损伤临界轴向力计算模型,结合插钉力与干涉量间的关系,建立临界干涉量的预测模型,求得分层损伤的临界干涉量;最后,采用ABAQUS有限元软件对CFRP层合板干涉螺接过程进行数值模拟,应用内聚力单元建立层合板层间界面,模拟了CFRP层合板在不同干涉量时的分层损伤机理,并通过扫描电子显微镜(SEM)实验观测了细观分层损伤。研究结果显示:干涉量是影响CFRP层合板分层损伤的主要工艺参数;层合板中越靠下边的层间界面,其不产生分层损伤的临界轴向力和临界干涉量越小,即越容易产生分层损伤。

关键词: CFRP, 干涉配合, 分层, 有限元分析, 内聚力单元, 临界干涉量

Abstract:

The interference fit joint of composite laminates boasts high performance, which is the development trend of composite structures in aircraft. However, delamination damage is easy to occur during the interference fit process. So the delamination damage and critical interference percentage are investigated during the interference fit process of carbon fiber reinforced plastics (CFRP) laminates by theoretical modeling and finite element method. Firstly, the mechanical behavior of interference fit bolt joint process and delamination damage are analyzed. Secondly, the critical thrust force without delamination damage of each interlaminar interface is modeled based on the virtual work principle, and then the critical interference percentage is predicted depending on the relation of inserting force and interference value. Finally, the interference fit bolt joint process of CFRP laminates is simulated by ABAQUS platform, and cohesive elements are applied in the interlaminar interface to simulating delamination damage mechanism of various interference percentages. In addition, microscopic delamination damage is evaluated by scanning electron microscope (SEM) in experiments. It is observed that the interference percentage is the principal parameter inducing delamination damage of CFRP laminates. The critical thrust force and critical interference percentage without delamination damage of CFRP laminates decrease with the interlaminar interface moving downward, which indicates that the closer to the bottom of CFRP laminates, the easier to be delamination.

Key words: CFRP, interference fit, delamination, FEA, cohesive element, critical interference percentage

中图分类号:

V258
O346.1

宋丹龙, 张开富, 钟衡, 李原. 层合板干涉螺接分层损伤及其临界干涉量[J]. 航空学报, 2016, 37(5): 1677-1688.

SONG Danlong, ZHANG Kaifu, ZHONG Heng, LI Yuan. Delamination damage and critical interference percentage for interference fit bolt joint of laminates[J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2016, 37(5): 1677-1688.

参考文献

[1] CAO Z Q, CARDEW-HALL M. Interference-fit riveting technique in fiber composite laminates[J]. Aerospace Science and Technology, 2006, 10(4):327-330.
[2] 魏景超, 矫桂琼, 闫照明, 等. 单面螺纹抽钉干涉配合复合材料连接件挤压强度研究[J]. 航空学报, 2013, 34(7):1627-1635. WEI J C, JIAO G Q, YAN Z M, et al. Bearing strength of composite joints interference-fitted with blind bolts[J]. Acta Aeronautica et Astronautica Sinica, 2013, 34(7):1627-1635(in Chinese).
[3] 姜杰凤, 董辉跃, 柯映林. 高锁螺栓干涉连接中极限干涉量[J]. 机械工程学报, 2013, 49(3):145-152. JIANG J F, DONG H Y, KE Y L. Maximum interference fit size of hi-lock bolted joints[J]. Journal of Mechanical Engineering, 2013, 49(3):145-152(in Chinese).
[4] PRADHAN B, RAMESH BABU P. Assessment of beneficial effects of interference-fit in pin-loaded FRP composites[J]. Journal of Reinforced Plastics and Composites, 2007, 26(8):771-788.
[5] SONG D L, LI Y, ZHANG K F, et al. Stress distribution modeling for interference-fit area of each individual layer around composite laminates joint[J]. Composites Part B:Engineering, 2015, 78:469-479.
[6] 刘萍, 张开达. 干涉对复合材料叠层板螺栓连接疲劳强度的影响[J]. 航空学报, 1991, 12(12):545-549. LIU P, ZHANG K D. An experimental study on fatigue life of interference-fit composite joint[J]. Acta Aeronautica et Astronautica Sinica, 1991, 12(12):545-549(in Chinese).
[7] 宋丹龙, 李原, 骆彬, 等. CFRP/Al复合构件无头铆钉压铆力建模与仿真分析[J]. 西北工业大学学报, 2012, 30(4):558-564. SONG D L, LI Y, LUO B, et al. An effective mathematical modeling for and simulation analysis of flush rivet pressing force of CFRP/Al components[J]. Journal of Northwestern Polytechnical University, 2012, 30(4):558-564(in Chinese).
[8] RIBEIRO M L, TITA V, VANDEPITTE D. A new damage model for composite laminates[J]. Composite Structures, 2012, 94(2):635-642.
[9] HOCHENG H, DHARAN C K H. Delamination during drilling in composite laminates[J]. Journal of Engineering for Industry, 1990, 112(3):236-239.
[10] TSAO C C, CHEN W C. Prediction of the location of delamination in the drilling of composite laminates[J]. Journal of Materials Processing Technology, 1997, 70(1-3):185-189.
[11] LACHAUD F, PIQUET R, COLLOMBET F, et al. Drilling of composite structures[J]. Composite Structures, 2001, 52(3-4):511-516.
[12] TSAO C C, HOCHENG H. The effect of chisel length and associated pilot hole on delamination when drilling composite materials[J]. International Journal of Machine Tools and Manufacture, 2003, 43(11):1087-1092.
[13] TSAO C C. Effect of induced bending moment (IBM) on critical thrust force for delamination in step drilling of composites[J]. International Journal of Machine Tools and Manufacture, 2012, 59:1-5.
[14] QI Z C, ZHANG K F, LI Y, et al. Critical thrust force predicting modeling for delamination-free drilling of metal-FRP stacks[J]. Composite Structures, 2014, 107:604-609.
[15] CAMANHO P P, MATTHEWS F L. Delamination onset prediction in mechanically fastened joints in composite laminates[J]. Journal of Composite Materials, 1999, 33(10):906-927.
[16] ATAS A, MOHAMED G F, SOUTIS C. Modelling delamination onset and growth in pin loaded composite laminates[J]. Composites Science and Technology, 2012, 72(10):1096-1101.
[17] 李彪, 李亚智, 胡博海. 一种层压复合材料组合界面单元及有限元模型[J]. 航空学报, 2013, 34(6):1370-1378. LI B, LI Y Z, HU B H. A new interfacial element and finite element model for composite laminates[J]. Acta Aeronautica et Astronautica Sinica, 2013, 34(6):1370-1378(in Chinese).
[18] 孟令兵. 层压复合材料分层扩展分析的虚拟裂纹闭合技术及其应用[D]. 南京:南京航空航天大学, 2009. MENG L B. Virtual crack closure technique for delamination growth analysis of laminated composites and its application[D]. Nanjing:Nanjing University of Aeronautics and Astronautics, 2009(in Chinese).
[19] 周正干, 孙广开, 陈秀成, 等. 复合材料紧固孔分层激光超声量化表征试验[J]. 航空学报, 2014, 35(8):2348-2354. ZHOU Z G, SUN G K, CHEN X C, et al. Quantitative characterization test of fastening hole delamination in composites with laser ultrasonics[J]. Acta Aeronautica et Astronautica Sinica, 2014, 35(8):2348-2354(in Chinese).
[20] WANG Z, ZHOU S, ZHANG J, et al. Progressive failure analysis of bolted single-lap composite joint based on extended finite element method[J]. Materials and Design, 2012, 37:582-588.
[21] 刘建明, 万小朋, 赵美英. 层合板螺栓连接结构疲劳寿命预测[J]. 航空学报, 2015, 36(6):1867-1875. LIU J M, WAN X P, ZHAO M Y. Fatigue life prediction of laminated bolted joint structures[J]. Acta Aeronautica et Astronautica Sinica, 2015, 36(6):1867-1875(in Chinese).
[22] HOCHENG H, TSAO C C. Comprehensive analysis of delamination in drilling of composite materials with various drill bits[J]. Journal of Materials Processing Technology, 2003, 140(1-3):335-339.
[23] 李顺林, 王兴业. 复合材料结构设计基础[M]. 武汉:武汉理工大学出版社, 1993:62-63. LI S L, WANG X Y. Basis of composite structural design[M]. Wuhan:Wuhan University of Technology Press, 1993:62-63(in Chinese).
[24] 段元欣, 钟衡, 张开富, 等. 复合材料螺栓干涉连接结构压钉过程轴向力建模[J]. 机械科学与技术, 2015, 34(8):1302-1307. DUAN Y X, ZHONG H, ZHANG K F, et al. An analytical model for predicting the axial force on bolt insertion process of composite interference-fit joint[J]. Mechanical Science and Technology for Aerospace Engineering, 2015, 34(8):1302-1307(in Chinese).
[25] NIU M C Y. Composite airframe structures-practical design information and data[M]. 3rd ed. Hong Kong:Hong Kong Conmilit Press, 2010:232-244.
[26] SONG D L, LI Y, ZHANG K F, et al. Micromechanical analysis for microscopic damage initiation in fiber/epoxy composite during interference-fit pin installation[J]. Materials and Design, 2016, 89:36-49.

E-mail：hkxb@buaa.edu.cn

关于我们

期刊社服务

专业学科

封面文章

友情链接

主管单位：中国科学技术协会主办单位：中国航空学会北京航空航天大学

层合板干涉螺接分层损伤及其临界干涉量

Delamination damage and critical interference percentage for interference fit bolt joint of laminates

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价

[1]	张会霞, 梁彦, 马超雄, 汪冕, 乔殿峰. 数据和知识驱动的空战目标集群类型综合识别[J]. 航空学报, 2023, 44(8): 327266-327266.
[2]	刘礼平, 齐雨阳, 蔺越国, 鲍蕊, 徐建新, 冯振宇, 卿光辉. 碳纤维复合材料胶铆混合修理结构静载拉伸失效[J]. 航空学报, 2023, 44(24): 428676-428676.
[3]	邹田春, 巨乐章, 管玉玺, 李泽钢, 陈红呈. 铺层方式对CFRP⁃Al胶接接头疲劳行为的影响[J]. 航空学报, 2023, 44(18): 428264-428264.
[4]	米翔, 陈务军, 张祎贝, 李世平, 黄晓惠. 大型CFRP薄壁管桁架加劲环稳定性研究[J]. 航空学报, 2023, 44(12): 227738-227738.
[5]	余煜玺, 张伟彬, 孙轶, 丛明辉, 朱建, 宋经远. 动密封用Ni基合金斜圈弹簧的变形行为及回弹力模拟[J]. 航空学报, 2022, 43(7): 425527-425527.
[6]	曹勇, 张超. 薄层复合材料冲击损伤行为研究进展[J]. 航空学报, 2022, 43(6): 525323-525323.
[7]	张旖诺, 乔红超, 曹治赫, 梁金盛, 赵吉宾. 水导激光加工CFRP深槽微观形貌特性[J]. 航空学报, 2022, 43(4): 525144-525144.
[8]	于成月, 刘波, 李传政, 薛闯. 复合材料卫星承力筒连接结构分析[J]. 航空学报, 2022, 43(3): 225161-225161.
[9]	杨夏炜, 彭冲, 马铁军, 温国栋, 王艳莹, 柴小霞, 徐雅欣, 李文亚. 高温合金线性摩擦焊接头疲劳裂纹扩展有限元分析[J]. 航空学报, 2022, 43(2): 625004-625004.
[10]	彭锦峰, 吴东润, 崔为运, 蔡登安, 周光明. 3D打印夹芯复合材料模拟冰型设计与分析[J]. 航空学报, 2021, 42(9): 224536-224536.
[11]	罗楚养, 江晟达, 陈梦熊, 张朋, 夏旭峰, 蔡培培. 基于高温树脂传递模塑工艺的碳纤维/聚酰亚胺复合材料连接环制备与验证[J]. 航空学报, 2021, 42(7): 625438-625438.
[12]	杨正伟, 赵志彬, 李胤, 宋远佳, 寇光杰, 李磊, 程鹏飞. 压-压疲劳载荷下CFRP层合板表面红外辐射特征[J]. 航空学报, 2021, 42(5): 524239-524239.
[13]	王安东, 卞贵学, 张勇, 陈跃良, 张柱柱, 张杨广. 海洋环境下G814/3233复合材料的老化机理及加速老化与自然老化的相关性[J]. 航空学报, 2021, 42(5): 524260-524260.
[14]	张峻瑞, 郑锡涛, 袁林, 钟贵勇, 李国琛. 基于损伤权重的混合多钉连接件疲劳寿命预测方法[J]. 航空学报, 2021, 42(5): 524306-524306.
[15]	陈志杰, 汤锦辉, 王冲, 程季锃, 曹珊, 邵欣. 人工智能赋能空域系统,提升空域分层治理能力[J]. 航空学报, 2021, 42(4): 525018-525018.