[1] |
李真, 王俊, 邓凡臣, 等. 复合材料机身壁板的强度分析与试验验证[J]. 航空学报, 2020, 41(9):223688. LI Z, WANG J, DENG F C, et al. Strength analysis and test verification of composite fuselage panels[J]. Acta Aeronautica et Astronautica Sinica, 2020, 41(9):223688(in Chinese).
|
[2] |
贾宝惠, 张刚, 蔺越国, 等. 湿热环境下含分层平面编织玻璃纤维/环氧树脂基复合材料层合板振动特性[J]. 复合材料学报, 2019, 36(4):892-904. JIA B H, ZHANG G, LIN Y G, et al. Vibration characteristic of delaminated plain woven fabric glass fiber/epoxy composite laminate under hygrothermal environment[J]. Acta Materiae Compositae Sinica, 2019, 36(4):892-904(in Chinese).
|
[3] |
牛一凡, 李璋琪, 朱晓峰. 全湿热场下碳纤维/环氧树脂复合材料弯曲性能及寿命预测[J]. 复合材料学报, 2020, 37(1):104-112. NIU Y F, LI Z Q, ZHU X F. Flexural properties and life-time estimation of carbon fiber/epoxy composite under hygrothermal conditions[J]. Acta Materiae Compositae Sinica, 2020, 37(1):104-112(in Chinese).
|
[4] |
杨强, 邵闯, 方可强. 航空发动机复合材料叶片振动疲劳特性研究[J]. 实验力学, 2014, 29(3):361-367. YANG Q, SHAO C, FANG K Q. Vibration fatigue characteristic study of aeroengine composite blade[J]. Journal of Experimental Mechanics, 2014, 29(3):361-367(in Chinese).
|
[5] |
回丽, 张旭, 许磊, 等. 碳纤维/环氧树脂复合材料湿热老化后的力学性能[J]. 机械工程材料, 2016, 40(1):62-65, 97. HUI L, ZHANG X, XU L, et al. Mechanical properties of carbon fiber/epoxy resin composite after hygrothermal aging[J]. Materials for Mechanical Engineering, 2016, 40(1):62-65, 97(in Chinese).
|
[6] |
张颖军, 朱锡, 梅志远, 等. 海洋环境载荷下T300/环氧复合材料自然老化特性实验研究[J]. 材料工程, 2011, 39(12):25-28. ZHANG Y J, ZHU X, MEI Z Y, et al. Experimental study on natural ageing character of T300/epoxy composite under marine environmental load[J]. Journal of Materials Engineering, 2011, 39(12):25-28(in Chinese).
|
[7] |
陈跃良, 刘旭. 聚合物基复合材料老化性能研究进展[J]. 装备环境工程, 2010, 7(4):49-56. CHEN Y L, LIU X. Progress of aging performance research of polymer matrix composites[J]. Equipment Environmental Engineering, 2010, 7(4):49-56(in Chinese).
|
[8] |
王云英, 刘杰, 孟江燕, 等. 纤维增强聚合物基复合材料老化研究进展[J]. 材料工程, 2011, 39(7):85-89. WANG Y Y, LIU J, MENG J Y, et al. A review on aging behaviors of fiber reinforced polymer-matrix composites[J]. Journal of Materials Engineering, 2011, 39(7):85-89(in Chinese).
|
[9] |
黄超, 陶春虎, 王占彬, 等. T300/648复合材料湿热老化行为与贮存寿命预测[J]. 四川兵工学报, 2013, 34(11):137-140. HUANG C, TAO C H, WANG Z B, et al. T300/648 composite material hygrothermal ageing behaviour and life prediction of storage[J]. Journal of Sichuan Ordnance, 2013, 34(11):137-140(in Chinese).
|
[10] |
中华人民共和国国家质量监督检验检疫总局, 中国国家标准化管理委员会. 纤维增强塑料层合板拉-拉疲劳性能试验方法:GB/T 16779-2008[S]. 北京:中国标准出版社, 2009. General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China. Test method for tension-tension fatigue of fiber reinforced plastic laminates:GB/T 16779-2008[S]. Beijing:Standards Press of China, 2009(in Chinese).
|
[11] |
卞贵学, 王安东, 张勇, 等. 直升机复合材料环境谱及加速谱编制研究[J]. 失效分析与预防, 2018, 13(2):73-77, 88. BIAN G X, WANG A D, ZHANG Y, et al. Study on compilation of environment spectrum and acceleration spectrum for composite of a helicopter[J]. Failure Analysis and Prevention, 2018, 13(2):73-77, 88(in Chinese).
|
[12] |
陈跃良, 王安东, 卞贵学, 等. 海洋环境下G827/3234复合材料老化机制及当量加速关系[J]. 复合材料学报, 2018, 35(12):3304-3312. CHEN Y L, WANG A D, BIAN G X, et al. Aging mechanism and equivalent acceleration relationship of G827/3234 composite in the marine environment[J]. Acta Materiae Compositae Sinica, 2018, 35(12):3304-3312(in Chinese).
|
[13] |
中华人民共和国国家质量监督检验检疫总局, 中国国家标准化管理委员会. 聚合物基复合材料纵横剪切试验方法:GB/T 3355-2014[S]. 北京:中国标准出版社, 2015. General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China. Test method for in-plane shear response of polymer matrix composite materials:GB/T 3355-2014[S]. Beijing:Standards Press of China, 2015(in Chinese).
|
[14] |
BEHERA A, DUPARE P, THAWRE M M, et al. Effects of hygrothermal aging and fiber orientations on constant amplitude fatigue properties of CFRP multidirectional composite laminates[J]. International Journal of Fatigue, 2020, 136:105590.
|
[15] |
BEHERA A, VISHWAKARMA A, THAWRE M M, et al. Effect of hygrothermal aging on static behavior of quasi-isotropic CFRP composite laminate[J]. Composites Communications, 2020, 17:51-55.
|
[16] |
张颖军, 朱锡, 梅志远, 等. 聚合物基复合材料老化剩余强度等效预测方法研究[J]. 材料导报, 2012, 26(8):150-152, 160. ZHANG Y J, ZHU X, MEI Z Y, et al. Equivalent estimating methods of ageing on polymer matrix composites residual strength[J]. Materials Review, 2012, 26(8):150-152, 160(in Chinese).
|
[17] |
AL-LAMI K, COLOMBI P, D'ANTINO T. Influence of hygrothermal ageing on the mechanical properties of CFRP-concrete joints and of their components[J]. Composite Structures, 2020, 238:111947.
|
[18] |
于远亮. 基于性能退化的长寿命产品可靠性建模与分析[D]. 长沙:国防科学技术大学, 2014. YU Y L. Long life product's reliability modeling and analysis based on performance degradation[D]. Changsha:National University of Defense Technology, 2014(in Chinese).
|
[19] |
肇研, 梁朝虎. 聚合物基复合材料自然老化寿命预测方法[J]. 航空材料学报, 2001, 21(2):55-58. ZHAO Y, LIANG Z H. The estimating method of atmospheric aging age on polymer matrix composites[J]. Journal of Aeronautical Materials, 2001, 21(2):55-58(in Chinese).
|
[20] |
刘治国, 贾明明, 王晓刚, 等. 某型复合材料加速腐蚀与大气腐蚀当量关系分析[J]. 装备环境工程, 2018, 15(1):66-69. LIU Z G, JIA M M, WANG X G, et al. Equivalent relation between accelerated corrosion and atmospheric corrosion of composite material[J]. Equipment Environmental Engineering, 2018, 15(1):66-69(in Chinese).
|
[21] |
刘旭, 陈跃良, 霍武军, 等. 碳纤维复合材料湿热老化加速关系[J]. 南京航空航天大学学报, 2014, 46(3):382-388. LIU X, CHEN Y L, HUO W J, et al. Accelerated relationship of hygrothermal aging for carbon fiber/polymer composites[J]. Journal of Nanjing University of Aeronautics & Astronautics, 2014, 46(3):382-388(in Chinese).
|