丝束张力对自动铺丝成型工艺的影响

doi:10.7527/S1000-6893.2015.0151

材料工程与机械制造

本期目录 | 过刊浏览 | 高级检索

前一篇 | 后一篇

丝束张力对自动铺丝成型工艺的影响

赵聪, 肖军, 王显峰, 李俊斐, 黄威

南京航空航天大学材料科学与技术学院, 南京 210016

收稿日期:2015-03-26 修回日期:2015-05-26 出版日期:2016-04-15 发布日期:2015-06-01
通讯作者: 肖军,Tel.:025-84892980 E-mail:j.xiao@nuaa.edu.cn E-mail:j.xiao@nuaa.edu.cn
作者简介:赵聪,男,博士研究生。主要研究方向:先进复合材料制造技术。Tel:025-84892980 E-mail:zhaocong198906@126.com;肖军,男,硕士,教授,博士生导师。主要研究方向:先进复合材料制造技术。Tel:025-84892980 E-mail:j.xiao@nuaa.edu.cn
基金资助:
国家"973"计划(2014CB046501);江苏省高校优势学科建设工程资助项目

Effects of tows tension on automated fiber placement process

ZHAO Cong, XIAO Jun, WANG Xianfeng, LI Junfei, HUANG Wei

College of Material Science and Technology, Nanjing University of Aeronautics and Astronautics, Nanjing 210016, China

Received:2015-03-26 Revised:2015-05-26 Online:2016-04-15 Published:2015-06-01
Supported by:
National Basic Research Program of China (2014CB046501);Project Funded by the Priority Academic Program Development of Jiangsu Higher Education Institutions

摘要/Abstract

摘要：

为获得良好的铺丝成型质量,通过理论分析和实际铺放实验,从送丝质量和铺放质量两个角度出发,研究了丝束张力对自动铺丝成型工艺的影响。送丝实验发现,丝束张力的大小对送丝精度和送丝可靠性影响显著;铺放实验发现,过大或过小的丝束张力都会导致铺放质量的下降,铺放过程中丝束张力维持在合理的范围内;基于铺放过程中预浸丝束的受力分析,探究了不同铺放条件下铺放张力对铺放质量的影响,讨论了影响丝束张力取值范围的因素,建立了丝束张力取值范围的计算公式并对该公式的合理性进行了实验性验证。最终得出结论,丝束张力是自动铺丝成型工艺的重要工艺参数之一,铺放中丝束张力的取值应随曲面形状和铺放轨迹的改变而调整,并与其他铺放工艺参数相匹配以实现铺放质量的最优化。

关键词: 复合材料, 自动铺丝, 工艺参数, 丝束张力, 送丝精度, 铺放质量

Abstract:

To improve the forming quality of automated fiber placement process, the effects of tows tension on automated fiber placement process are studied by tows feeding and layup experiments. The results of tows feeding experiments turn out that the tows feeding precision and reliability is affected significantly by tension. In order to guarantee tows feeding precision and reliability, the value of tows tension should be kept uniformly and in a proper range. The layup experiment shows that inappropriate tows tension definitely reduces the process quality. By force analysis of the prepreg tow, the influences of tows tension on different layup conditions are discussed, the factors which influenced the proper value range of tows tension are discussed, and the formula of tows tension is derived and verified by layup experiments. Tows tension is one of the important parameter of automated fiber placement process. The value of tows tension should be promptly adjusted with mould surface, trajectory and other processing parameters to improve layup quality.

Key words: composites, automated fiber placement, processing parameters, tows tension, feeding precision, layup quality

中图分类号:

赵聪, 肖军, 王显峰, 李俊斐, 黄威. 丝束张力对自动铺丝成型工艺的影响[J]. 航空学报, 2016, 37(4): 1384-1392.

ZHAO Cong, XIAO Jun, WANG Xianfeng, LI Junfei, HUANG Wei. Effects of tows tension on automated fiber placement process[J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2016, 37(4): 1384-1392.

参考文献

[1] LUKASZEWICZ D J, WARD C, POTTER K D. The engineering aspects of automated prepreg layup:History, present and future[J]. Composites Part B:Engineering, 2012, 43(3):997-1009.
[2] 杨会芳, 李中凯, 金辉. 大型复合材料丝束铺放机关键部件结构分析[J]. 航空制造技术, 2010(22):72-75. YANG H F, LI Z K, JIN H. Analysis of key component of large composites fiber placement machine[J]. Aeronautical Manufacturing Technology, 2010(22):72-75(in Chinese).
[3] 刘亚威. F-35战斗机进气道的自动化制造[J]. 国防制造技术, 2011(4):32-35. LIU Y W. Application of automatic process in manufacture of F-35 fighter's inlet[J]. Defense Manufacturing Technology, 2011(4):32-35(in Chinese).
[4] 肖军. 航空复合材料自动铺丝技术发展现状[J]. 国际航空, 2011(12):70-72. XIAO J. Application of automatic fiber placement in manufacture of aeronautical composite[J]. International Aviation, 2011(12):70-72(in Chinese).
[5] SHIRINZADEH B, ALICI G, FOONG C W, et al. Fabrication process of open surfaces by robotic fiber placement[J]. Robotics and Computer Integrated Manufacturing, 2004, 20(1):17-28.
[6] LUKASZEWICZ D J. Optimization of high-speed automated layup of thermoset carbon fiber preimpregnates[D]. Bristol:University of Bristol, 2011:41-50.
[7] 文琼华, 王显峰, 何思敏, 等. 温度对预浸料铺放效果的影响[J]. 航空学报, 2011, 32(9):1740-1745. WEN Q H, WANG X F, HE S M, et al. Influence of temperature on placement effect of prepreg[J]. Acta Aeronautica et Astronautica Sinica, 2011, 32(9):1740-1745(in Chinese).
[8] 段玉岗, 闫晓丰, 李超, 等. 压辊材料及形状对纤维铺放压紧效果的影响[J]. 航空学报, 2014, 35(4):1173-1180. DUAN Y G, YAN X F, LI C, et al. Effect of material and shape of compaction roller on the voids and compaction uniformity in fiber placement process[J]. Acta Aeronautica et Astronautica, 2014, 35(4):1173-1180(in Chinese).
[9] LUKASZEWICZ D J, WEAVER P M, POTTER K. The impact of processing conditions on the final part quality in automated tape deposition technologies[C]//29th SAMPE Europe International Conference. Paris:SAMPE Europe, 2009:236-241.
[10] LUKASZEWICZ D J, WEAVER P M, POTTER K. An empirical model for the automated deposition of thermoset composite[C]//ACS-24th technical conference. Delaware:University of Delaware, 2009:126-130.
[11] AIZED T, SHIRINZADEH B. Robotic fiber placement process analysis and optimization using response surface method[J]. International Journal of Advanced Manufacture and Technology, 2011, 55(1-4):393-404.
[12] 段玉岗, 刘芬芬, 陈耀, 等. 纤维铺放压紧力及预浸带加热温度对复合材料力学性能的影响[J]. 复合材料学报, 2012, 29(4):148-156. DUAN Y G, LIU F F, CHEN Y, et al. Effects of compaction force and heating temperature of prepreg on composite mechanical properties during fiber placement process[J]. Acta Materiae Compositae Sinica, 2012, 29(4):148-156(in Chinese).
[13] HASSAN N, THOMPSON J E, BATRA R C, et al. A heat transfer analysis of the fiber placement composite manufacturing process[J]. Journal of Reinforced Plastics and Composites, 2005, 24(8):869-888.
[14] LI Y H, FU H Y, SHAO Z X. The influence of preheating on automated fiber placement speed[J]. Advanced Materials Research, 2011, 213:136-142.
[15] 林胜. 自动铺带机/铺丝机(ATL/AFP)-现代大型飞机制造的关键设备(上)[J]. 世界制造技术与装备市场, 2009(4):84-89. LIN S. ATL/AFP-the key machine for manufacturing of modern large airplane (A)[J]. World Manufacturing Engineering & Market, 2009(4):84-89(in Chinese).
[16] 孔燕. 八通道自动铺丝张力测控系统方案设计[D]. 南京:南京航空航天大学, 2007:21-40. KONG Y. The tension testing and control system design of 8-channel automated tow placement[D]. Nanjing:Nanjing University of Aeronautics and Astronautics, 2007:21-40(in Chinese).
[17] 邵忠喜. 纤维铺放装置及其铺放关键技术研究[D]. 哈尔滨:哈尔滨工业大学, 2010:31-49. SHAO Z X. Research on key technology of fiber placement machine[D]. Harbin:Harbin Institute of Technology, 2010:31-49(in Chinese).
[18] 刘雄亚, 谢怀勤. 复合材料工艺及设计[M]. 武汉:武汉理工大学出版社, 2010:165-167. LIU X Y, XIE H Q. Process and equipment of composites[M]. Wuhan:Wuhan University of Technology Press, 2010:165-167(in Chinese).
[19] 王斌, 丘哲明, 刘爱华, 等. 高性能PBO纤维复合材料成型工艺参数研究[J]. 航空学报, 2004, 25(2):192-196. WAN B, QIU Z M, LIU A H, et al. Study of manufacture processing parameter of high performance PBO fiber composite[J]. Acta Aeroautica et Astronautica Sinica, 2004, 25(2):192-196(in Chinese).
[20] MERTINY P, ELLYIN F. Influence of the filament winding tension on physical and mechanical properties of reinforced composites[J]. Composites Part A:Applied Science and Manufacturing, 2002, 33(12):1615-1622.
[21] 梅向明, 黄敬之. 微分几何[M]. 北京:高等教育出版社, 2005:145-146. MEI X M, HUANG J Z. Differential geometry[M]. Beijing:Higher Education Press, 2005:145-146(in Chinese).
[22] CHAO T, CHUNK Z, DAVID A J, et al. The effect of inclusion waviness and waviness distribution on elastic properties of fiber reinforced composites[J]. Composites Part B:Engineering, 2011, 42(1):62-70.
[23] ARAO Y, KOYANAGI J, UTSUNOMIYA S, et al. Effect of ply angle misalignment on out-of-plane deformation of symmetrical cross-ply CFRP laminates:Accuracy of the ply angle alignment[J]. Composite Structure, 2011, 93(4):1225-1230.
[24] GUTOWSKI T G, BONHOMME L. The mechanics of prepreg conformance[J]. Journal of Composite Materials, 1988, 22(3):204-223.
[25] 陆楠楠, 肖军, 齐俊伟, 等. 面向自动铺放的预浸料动态黏性实验研究[J]. 航空学报, 2014, 35(1):279-286. LU N N, XIAO J, QI J W, et al. Experimental research on prepreg dynamic tack based on automated placement process[J]. Acta Aeronautica et Astronautica Sinica, 2014, 35(1):279-286(in Chinese).

E-mail：hkxb@buaa.edu.cn

关于我们

期刊社服务

专业学科

封面文章

友情链接

主管单位：中国科学技术协会主办单位：中国航空学会北京航空航天大学

丝束张力对自动铺丝成型工艺的影响

Effects of tows tension on automated fiber placement process

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价

[1]	张伟, 王彬文, 樊俊铃, 詹绍正, 焦婷, 杨宇. 基于多模式超声成像的CFRP冲击损伤无损表征与冲击后压缩强度预测[J]. 航空学报, 2023, 44(1): 426635-426635.
[2]	郑锋, 黄薇, 季宏丽, 裘进浩. 复合材料薄板结构中的声学黑洞效应探究[J]. 航空学报, 2023, 44(1): 426453-426453.
[3]	冉庆波, 肖鸿, 杨富鸿, 段玉岗. 含孔曲面自动铺丝轨迹规划算法[J]. 航空学报, 2022, 43(9): 425602-425602.
[4]	万傲霜. 复合材料直升机平尾结构概率损伤容限评估[J]. 航空学报, 2022, 43(6): 525557-525557.
[5]	邓云飞, 周楠, 田锐, 魏刚. S型碳纤维褶皱夹芯结构低速冲击响应特性实验研究[J]. 航空学报, 2022, 43(6): 525446-525446.
[6]	刘增飞, 刘凯, 张斌斌, 李雪枫, 葛敬冉, 黄建, 李超, 孙新杨, 孙煜, 梁军. 纱线规格对3D机织复合材料拉伸性能的影响[J]. 航空学报, 2022, 43(6): 525453-525453.
[7]	王育鹏, 吕帅帅, 杨宇, 李嘉欣, 王叶子. 基于域自适应的复合材料结构损伤识别方法[J]. 航空学报, 2022, 43(6): 526752-526752.
[8]	赵天, 李营, 张超, 姚辽军, 黄怿行, 黄治新, 陈诚, 汪万栋, 祖磊, 周华民, 裘进浩, 邱志平, 方岱宁. 高性能航空复合材料结构的关键力学问题研究进展[J]. 航空学报, 2022, 43(6): 526851-526851.
[9]	郭琼, 刘玮, 裴连杰, 郭俊豪. 全尺寸复合材料机身筒段静力/疲劳试验技术[J]. 航空学报, 2022, 43(6): 525816-525816.
[10]	汪厚冰, 王夏涵, 林国伟, 李新祥, 杨胜春. 含离散源损伤的复合材料壁板的剩余强度评估[J]. 航空学报, 2022, 43(6): 525899-525899.
[11]	刘振东, 郑锡涛, 范雯静, 张东健. 固化残余应力对无人机复合材料机翼强度的影响[J]. 航空学报, 2022, 43(6): 526117-526117.
[12]	曹勇, 张超. 薄层复合材料冲击损伤行为研究进展[J]. 航空学报, 2022, 43(6): 525323-525323.
[13]	李涤尘, 鲁中良, 田小永, 张航, 杨春成, 曹毅, 苗恺. 增材制造——面向航空航天制造的变革性技术[J]. 航空学报, 2022, 43(4): 525387-525387.
[14]	赵可汗, 刘多, 朱海涛, 陈斌, 胡胜鹏, 宋晓国. 钎焊温度对C/C/AgCuTi+C_f/TC4接头组织及力学性能的影响[J]. 航空学报, 2022, 43(4): 525007-525007.
[15]	张加波, 张开虎, 范洪涛, 路明雨, 高泽, 张孝辉. 纤维复合材料激光加工进展及航天应用展望[J]. 航空学报, 2022, 43(4): 525735-525735.