导航
Archive
Progress in hypersonic boundary layer transition delay control
LIU Qiang, TU Guohua, LUO Zhenbing, CHEN Jianqiang, ZHAO Rui, YUAN Xianxu
doi: 10.7527/S1000-6893.2021.25357
2022, (7): 25357-025357.
PDF [ 5986 K ]( 507 ) HTML
Countering unmanned ground system:A review of key technologies
WANG Wei, WANG Qinzhao, LIU Gangfeng, CHENG Hui, TAO Yi, GUO Aobing
doi: 10.7527/S1000-6893.2021.25489
2022, (7): 25489-025489.
PDF [ 8423 K ]( 427 ) HTML
Review of distributed hybrid electric propulsion aircraft technology
ZHU Bingjie, YANG Xixiang, ZONG Jian'an, DENG Xiaolong
doi: 10.7527/S1000-6893.2021.25556
2022, (7): 25556-025556.
PDF [ 14513 K ]( 1157 ) HTML
Experiment on influence of leading-edge shape on aerodynamic characteristics of cavity model
LIU Jun, LUO Xinfu, WANG Xiansheng
doi: 10.7527/S1000-6893.2021.25235
2022, (7): 125235-125235.
PDF [ 6766 K ]( 230 ) HTML
An efficient design method for blade of ducted propeller
GUO Jiahao, ZHOU Zhou, LI Xu
doi: 10.7527/S1000-6893.2021.25253
2022, (7): 125253-125253.
PDF [ 4747 K ]( 390 ) HTML
Optimal air supply mode of aircraft cabin based on removal effectiveness and draft rating
LIN Jiaquan, DAI Shiqing
doi: 10.7527/S1000-6893.2021.25266
2022, (7): 125266-125266.
PDF [ 8001 K ]( 124 ) HTML
Aerodynamic design of modular configuration for multi-mission unmanned aerial vehicle
LI Chunpeng, ZHANG Tiejun, QIAN Zhansen, LIU Tiezhong
doi: 10.7527/S1000-6893.2021.25411
2022, (7): 125411-125411.
PDF [ 9470 K ]( 372 ) HTML
Uncertainty impact of Reynolds number on flow losses of high-lift low-pressure turbine cascade
LUO Jiaqi, FU Wenhao, ZENG Xian, XIA Zhiheng
doi: 10.7527/S1000-6893.2021.25427
2022, (7): 125427-125427.
PDF [ 7787 K ]( 177 ) HTML
Direct numerical simulation of separation bubble in shock wave/turbulent boundary layer interaction
TONG Fulin, DONG Siwei, DUAN Junyi, LI Xinliang
doi: 10.7527/S1000-6893.2021.25437
2022, (7): 125437-125437.
PDF [ 12099 K ]( 396 ) HTML
Design of helicopter target rotor based on similar dynamic RCS characteristics
FEI Zhongyang, JIANG Xiangwen, ZHAO Qijun
doi: 10.7527/S1000-6893.2021.25465
2022, (7): 125465-125465.
PDF [ 11660 K ]( 208 ) HTML
Aerodynamic performance and flow mechanism of ducted propeller with different design variables
HAN Kai, BAI Junqiang, QIU Yasong, CHANG Min
doi: 10.7527/S1000-6893.2021.25466
2022, (7): 125466-125466.
PDF [ 13641 K ]( 557 ) HTML
Influence of various core working conditions on twin-duct matching in fan booster
ZHENG Tan, YANG Xiaohe, YE Jun, FENG Jinzhang
doi: 10.7527/S1000-6893.2021.25477
2022, (7): 125477-125477.
PDF [ 12793 K ]( 118 ) HTML
Influence of turbulent kinetic energy on shock wave/boundary layer interaction
ZHANG Haoyuan, SUN Dong, QIU Bo, ZHU Yandan, WANG Anling
doi: 10.7527/S1000-6893.2021.25504
2022, (7): 125504-125504.
PDF [ 7839 K ]( 278 ) HTML
Influence of “frozen viscosity assumption” on solution and gradient accuracy of adjoint system
WU Hangkong, WANG Dingxi, HUANG Xiuquan, XU Shenren
doi: 10.7527/S1000-6893.2021.25512
2022, (7): 125512-125512.
PDF [ 8918 K ]( 136 ) HTML
Test on stall types of contra-rotating compressor with variable speed ratios
WANG Hao, XUE Fei, YUE Shaoyuan, WANG Yangang
doi: 10.7527/S1000-6893.2021.25596
2022, (7): 125596-125596.
PDF [ 8789 K ]( 141 ) HTML
Crossflow modification of transition model for hypersonic boundary layer and its application
ZHU Zhibin, SHANG Qing, SHEN Qing
doi: 10.7527/S1000-6893.2021.25685
2022, (7): 125685-125685.
PDF [ 12762 K ]( 154 ) HTML
Highland atmospheric turbulence model for helicopter flight simulation
JI Honglei, SU Junjie, CHEN Renliang, KONG Weihong
doi: 10.7527/S1000-6893.2021.26564
2022, (7): 126564-126564.
PDF [ 4420 K ]( 105 ) HTML
Analysis of low altitude UAV conflict resolution safety based on STPA-TOPAZ
ZHANG Honghong, GAN Xusheng, SUN Jingjuan, ZHAO Guhao, HAN Baohua
doi: 10.7527/S1000-6893.2021.25354
2022, (7): 325354-325354.
PDF [ 7580 K ]( 163 ) HTML
Partial discharge characteristics of future more electric aircraft under low air pressure
ZHANG Bendong, JIANG Jun, LI Zhi, LI Shimin, ZHANG Chaohai
doi: 10.7527/S1000-6893.2021.25374
2022, (7): 325374-325374.
PDF [ 7474 K ]( 130 ) HTML
Imaging posture and coverage of Chang'e 5 surface sampling manipulator cameras
ZHENG Yanhong, DENG Xiangjin, JIN Shengyi, CHEN Liping, YAO Meng, ZHAO Zhihui
doi: 10.7527/S1000-6893.2021.25388
2022, (7): 325388-325388.
PDF [ 7629 K ]( 175 ) HTML
A radar-embedded communication waveform design method based on SVD
LI Baoguo, ZHANG Cheng'an, XU Jianqiu
doi: 10.7527/S1000-6893.2021.25401
2022, (7): 325401-325401.
PDF [ 5921 K ]( 96 ) HTML
Remaining useful life prediction of multivariate degradation equipment based on CDBN and BiLSTM
MU Hanxiao, ZHENG Jianfei, HU Changhua, ZHAO Ruixing, DONG Qing
doi: 10.7527/S1000-6893.2021.25403
2022, (7): 325403-325403.
PDF [ 7171 K ]( 218 ) HTML
A novel method for TDOA localization in presence of synchronization clock bias and sensor position uncertainty
WANG Ding, YIN Jiexin, GAO Lu, YANG Bin
doi: 10.7527/S1000-6893.2021.25405
2022, (7): 325405-325405.
PDF [ 9564 K ]( 211 ) HTML
Identification of interference source for single satellite geolocation using chaotic mapping
ZHANG Yi, ZHAI Shenghua, TAO Haihong
doi: 10.7527/S1000-6893.2021.25407
2022, (7): 325407-325407.
PDF [ 6144 K ]( 176 ) HTML
Levitation principle and implementation of 6/4 bearingless switched reluctance motor
MIAO Wei, CAO Xin, LIU Chenhao, DENG Zhiquan
doi: 10.7527/S1000-6893.2021.25434
2022, (7): 325434-325434.
PDF [ 10782 K ]( 196 ) HTML
UAV target tracking algorithm based on adaptive fusion network
LIU Fang, SUN Yanan
doi: 10.7527/S1000-6893.2021.25522
2022, (7): 325522-325522.
PDF [ 7186 K ]( 251 ) HTML
Cooperative attack decision modeling method of multiple UAVs based on FCM
CHEN Jun, LIANG Jing, CHENG Long, TONG Yan
doi: 10.7527/S1000-6893.2021.25526
2022, (7): 325526-325526.
PDF [ 7286 K ]( 248 ) HTML
Priority-driven generalized real-time performance analysis of avionics network
YU Sifan, HE Feng, XIONG Huagang
doi: 10.7527/S1000-6893.2021.25578
2022, (7): 325578-325578.
PDF [ 5730 K ]( 112 ) HTML
Surface flashover characteristics of kapton in low pressure environment
YUAN Qingyun, SUN Yongwei, ZHANG Xijun, WANG Pingping
doi: 10.7527/S1000-6893.2021.25384
2022, (7): 425384-425384.
PDF [ 4271 K ]( 100 ) HTML
Design and analysis of morphing wing skeleton based on tetrahedral element
XIAO Hong, GUO Hongwei, ZHANG Di, YANG Guang, LIU Rongqiang, LOU Yunjiang, LI Bing
doi: 10.7527/S1000-6893.2021.25391
2022, (7): 425391-425391.
PDF [ 7537 K ]( 161 ) HTML
Ultrasonicaliasing signal separation based on improved SL0 algorithm
LU Chuanyu, LU Minghui, LIU Haoyu, XU Xihao
doi: 10.7527/S1000-6893.2021.25419
2022, (7): 425419-425419.
PDF [ 7972 K ]( 108 ) HTML
Special defect inspection of composite aramid paper honeycomb sandwich structure
HAO Wei, LI Ming, WANG Jue, XU Ying
doi: 10.7527/S1000-6893.2021.25426
2022, (7): 425426-425426.
PDF [ 6110 K ]( 163 ) HTML
Measuring crystallographic orientation of Ni-based single-crystal materials using ultrasonic velocity method
ZHANG Chenxin, YAO Song, LI Xiongbing, YANG Yang, HAN Jun
doi: 10.7527/S1000-6893.2021.25431
2022, (7): 425431-425431.
PDF [ 5804 K ]( 160 ) HTML
Large-stroke compliant micro-positioning stage considering parasitic rotation
CAO Yi, MENG Gang, JU Yongjian, XU Weisheng
doi: 10.7527/S1000-6893.2021.25498
2022, (7): 425498-425498.
PDF [ 12432 K ]( 75 ) HTML
Simulation analysis of deformation behavior and resilience of Ni-based alloy canted coil spring for dynamic seal
YU Yuxi, ZHANG Weibin, SUN Yi, CONG Minghui, ZHU Jian, SONG Jingyuan
doi: 10.7527/S1000-6893.2021.25527
2022, (7): 425527-425527.
PDF [ 10913 K ]( 181 ) HTML
Preparation of carbon nanotubes/polyimide foam and its microwave absorption properties
WANG Yueyi, YAN Dingxiang, LI Zhongming
doi: 10.7527/S1000-6893.2021.25531
2022, (7): 425531-425531.
PDF [ 7978 K ]( 268 ) HTML
Time-varying error compensation for horizontal machining center based on mechanism-driven model
SONG Lei, LIU Kuo, CUI Yiming, CHEN Hu, CHEN Yufeng, WANG Yongqing
doi: 10.7527/S1000-6893.2021.25549
2022, (7): 425549-425549.
PDF [ 8816 K ]( 101 ) HTML
On-machine detection of geometric and state parameters of end mills based on machine vision
LIU Zhan, ZHANG Jun, YIN Jia, ZHAO Wanhua
doi: 10.7527/S1000-6893.2021.25593
2022, (7): 425593-425593.
PDF [ 6876 K ]( 184 ) HTML
Vibration fatigue load spectrum compilation and test verification
MAO Senxin, SHI Hanyang, LI Kaixiang, ZHANG Xiao, ZHU Yuntao, DU Juan, ZOU Kangzhuang, XIONG Junjiang
doi: 10.7527/S1000-6893.2021.26585
2022, (7): 426585-426585.
PDF [ 13097 K ]( 330 ) HTML
Academic Quality
Download Ranking